MAKX177F GPM shocks or Arrma Kraton 8S, front

€69.90*

Available

Product number: gpm_makx177f

EAN: 4058575140948

Product information "MAKX177F GPM shocks or Arrma Kraton 8S, front"

Genuine GPM spare/option part.

These GPM shocks are basically the same as the piggyback version, just without the piggyback. This allows for a more budget-friendly price.
Shocks come in pairs including all-metal lower ball joints, spring perches and two pairs of springs with 2.6 mm and 2.8 mm wire diameter. Reinforced shock shafts with 6 mm diameter.

Fits Arrma Kraton 8S front suspension application only!

Length extended/compressed (center-to-center of mounting points): approx. 180 mm/125 mm.

Contents:

2 pieces

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Similar products

AKX10 / + 11MM GPM wheel spacers for Arrma Kraton 8S

Genuine GPM spare/option part. GPM GPM wheel spacers for Arrma Kraton 8S, CNC-machined from 6061-T6 aluminum. Tread width is increased by 11mm per side / 22mm in total, fits front and rear.Does not fit Outcast rims due to their different design on the inner side!Contents:2 pieces

€29.90*

AKX005 GPM Closed wheel nuts for Arrma Kraton/Outcast 8S

Genuine GPM spare/option part. Closed wheel nuts made of 6061T6 aluminum from GPM, suitable for Arrma Kraton/Outcast 8S.Secure hold of the rim due to large flange with 34 mm diameter and serrated surface.Wrench size: 24 mmThread size: M18x1,0Thread depth: 9 mmContents:4 pieces

€19.90*

ARA320617 ARRMA Bumper And Skids for Kraton 8S EXB

Genuine ARRMA spare/option part. Contents:1 set

€26.99*

AKX008 GPM aluminum hinge pin brackets front suspension, lower, for Arrma Kraton / Outcast 8S

Genuine GPM spare/option part. Milled 6061T6 aluminum additional heat sink from GPM with larger 12 volt fan (60 x 60 x 15 mm) for Arrma Kraton / Outcast 8S. The additional heat sink also serves as an adapter plate to mount the larger fan on the original heat sink. A machined contact guard for the intake side of the fan is also included.The fan is connected to the EC5 connector of a 3S or 4S drive battery using an adapter cable (included). Thus, the operating current does not have to be provided by the ESC's BEC.The overall height of the unit, measured from the bottom of the additional heat sink is about 30 mm.Contents:2 pieces

€29.90*

AKX054 GPM aluminum a-arms front upper for Arrma Kraton / Outcast 8S

Genuine GPM spare/option part. GPM front upper aluminum a-arms for Arrma Kraton / Outcast 8S, CNC- machined from 6061-T6 aluminum. More torsion-resistant than the standard plastic parts and with an exchangeable plastic bushings for the wishbone pin.Comes complete with wishbone pins (direct replacement for original sets ARA330561 and ARA330564).Contents:2 pieces

€39.90*

Details

AKX009 GPM aluminum hinge pin brackets rear axle, lower, for Arrma Kraton / Outcast 8S

Genuine GPM spare/option part. GPM aluminum lower hinge pin brackets rear axle for Arrma Kraton / Outcast 8S, CNC- machined from 6061-T6 aluminum. With this set, the multi-part front bracket is replaced by a one-piece design with plastic bushings.(Replaces original sets ARA330555, ARA330588 and ARA330557)Contents:2 pieces

€29.90*

ARA320591 ARRMA Aluminium Motor Plate 56 Series red for Kraton / Outcast 8S

Genuine ARRMA spare/option part. This red Aluminum Motor Plate is specially designed to provide a safe and secure mounting point for your 56 series motorFeaturesPrecision manufactured from lightweight aluminum for reduced vehicle weight and consistent hardware fit - Anodized red for cool ARRMA looks and increased durability - Precision manufactured screw mounting holes for fast and easy servicing - 1.18 inch (30mm) screw pitch - Aluminum material will assist in dissipating heat during extreme RC actionContents:1 pieces

€44.99*

ARA330749 ARRMA Shock Set rear Kraton 8S EXB

Genuine ARRMA spare/option part. This assembled 188mm Shock Set, featuring 6mm thick shock shafts and heavy duty rod ends, provides ideal replacement parts for your ARRMA vehicle.Precision manufactured red anodized aluminum shock bodies - Smooth polished stainless steel shock shafts - Tough composite molded parts - Supplied assembled without springs - Features 6mm thick shock shafts and heavy duty rod ends for awesome durability - Pre-filled with 700cSt silicone shock oil - Supplied fitted with 8 hole 1.5mm shock pistons - Ready to bolt on to your vehicle after fitting your choice of spring - Threaded spring preload adjusters included for fine-tuning vehicle ride heightContents:2 pieces

€94.99*

AKX055 GPM front lower aluminum a-arms for Arrma Kraton / Outcast 8S

Genuine GPM spare/option part. GPM front lower aluminum a-arms for Arrma Kraton / Outcast 8S, CNC- machined from 6061-T6 aluminum. More torsion-resistant than the standard plastic parts and with an exchangeable plastic bushing for the wishbone pin.(Direct replacement for original set ARA330589)Contents:2 pieces

€59.90*

MAKX177F+R GPM shocks for Arrma Kraton 8S, front and rear, 2 pairs

Genuine GPM spare/option part. These GPM shocks are basically the same as the piggyback version, just without the piggyback. This allows for a more budget-friendly price.Shocks come in pairs including all-metal lower ball joints, spring perches and two pairs of springs with 2.6 mm and 2.8 mm wire diameter. Reinforced shock shafts with 6 mm diameter.Fits Arrma Kraton 8S only!Front:Length extended/compressed (center-to-center of mounting points): approx. 180 mm/125 mm.Rear:Length extended/compressed (center-to-center of mounting points): approx. 190 mm/131 mm.Contents:1 set

€119.90*

AKX040 GPM Aluminum wheelie bar with wing mount for Arrma Kraton / Outcast 8S

Genuine GPM spare/option part. Milled 6061T6 aluminum wheelie bar with wing mount for Arrma Kraton / Outcast 8S.Significantly stronger than the stock part, it also offers an adjustment option for the angle of the wing.Double ball bearing 55 mm diameter wheels made of Delrin with replaceable O-rings as "tread".Contents:1 set

€84.90*

MAKX021 GPM Aluminum front spindles, Arrma Kraton / Outcast 8S

Genuine GPM spare/option part. Front spindles from GPM for Arrma Kraton / Outcast 8S, machined from 6061 aluminum. Extremely torsion-resistant and robust.Contents:2 pieces

€64.90*

Customers also viewed

TT0198 Top Tuning Bubble-Ex for 1/10 up to 1/5 scale rc-cars

Genuine Top Tuning spare/option part. Indispensable for optimal suspension tuning!Vacuum container for removal of bubbles from shock fluid when filling shocks.A vacuum pump is built into the lid. The tray has four holes each to accept 1/10, 1/8, 1/6 and 1/5 scale shocks.Suitable for shock absorbers from Losi, Mecatech, BWS, Arrma, Traxxas, FG, Carson, HPI and many more, as long as they have a suitable diameter. All shocks from 15 to 32 mm outer diameter can be used in the Bubble Ex to be "de-bubbled". Tray bore sizes: No. 1 = 32 mm diameter No. 2 = 21 mm diameter No. 3 = 17.5 mm diameter No. 4 = 15 mm diameter The maximum length of the shock absorber up to the upper edge of the body is about 150 mm, whereby longer shock absorbers can also be partially compressed for insertion. (e.g Losi 5ive-T and many more)Operation:Unlock the vacuum pump by turning it slightly to the left, the pump handle then extends a little. The small plug with handle is used to close and ventilate the container. To build up the vacuum, the plug must be in the down position.The small membrane on the opposite side serves as an indicator for whether a vacuum is present. Only when this is curved outwards the lid of the container can be opened again without any effort. Content: Can with integrated vacuum pump Shock tray

€49.90*

MAKX024N GPM Aluminum servo saver with spring, 25T, with servo adapter frame, Arrma Kraton / Outcast 8S

Genuine GPM spare/option part. Servo saver machined from 7075 T6 aluminum by GPM for Kraton / Outcast 8S. Much stronger than the stock plastic part.Fits servos with 25T spline shaft.Comes with a 6061 aluminum adapter frame for installation of a small steering servo (40/20/20 size).Note: due to the replacement of standard servo, the center point of servo is slightly offset, so the length of the servo linkage needs to be adjusted.Contents:1 set

€44.90*

HW30850400 Hobbywing OTA Bluetooth Programer

Product information "Hobbywing OTA Bluetooth Programer"Thanks to the OTA Programming Module, Hobbywing ESCs can be programmed in a new modern and intuitive way. The ESC is wirelessly connected to a smartphone via the Bluetooth signal sent by the module. All parameters can then be selected and set as usual in the Hobbywing "HW Link" app.The OTA programming module is also smaller and lighter than a conventional programming box and therefore fits comfortably in any pocket. So perfect for on the go.FeaturesEasy to operateCompact designData Recording in real time (compatible ESC required)Firmware-Update within the "HW Link"-AppInclusive Reset-Button on the bottom sideSuitable for the following HobbyWing productsselected XERUN and EZRUN-ESCs for RC carsselected PLATINUM-ESCs for RC aircraftsselected SEAKING-ESCs for RC BoatsTechnical SpecificationsDimensions:30x25.5x8.5mmWeight:10.2gWorking Voltage:5-12.6VEffective Range:0-3mSupported Bluetooth-Version:>/= 4.0 Notice: You can download the "HW Link"-App by Hobbywing for Android-Devices in the Google Play Store as well as for IOS-Devices in the Apple Store.

€33.20*