Losi 5IVE-TE 3.0 Electric 4WD Desert Truck 1/5, RTR, 12S "Release 22.05.26"

Here is the FG Short Cross 4WD with a 26cc engine and painted body.RTR available.Pro trucks and short course vehicles are becoming increasingly popular in the world of car racing. They are monstrous, powerful cars with long suspension travel that enable spectacular group races. The “Short Cross” has reliable mechanics that are equipped with stiffeners and protective flaps. A highly detailed polycarbonate body fits the chassis perfectly. The 4WD drive ensures smooth propulsion on any terrain. You can select the car with complete RTR-equipment from the options menu.RTR-equipmentRTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed.Transmitter 2,4 GHzReceiverHigh power servo for throttle and brakeLargescale servo for steeringTx-battery, rx-batteryFor an additional charge you can also select the HT-EDITION above. A great tuning offer for your new FG. The standard price for the individual parts is €200.30. These tuning parts not only look great, but they also make your model more reliable.HT-Edition?HT-Edition means: this version comes with a big set of spare / option parts included.Steel pinions - Non-standard sizesEach of two different ratios are supplied with.Modul: m=1,5Value: 62,60 EURAlloy engine mount smallCNC machined alloy engine mounts, direkt replacement for the stock plastic parts, heat and tweak resistant.Value: 54,90 EURDriveshaft bootsProtect ball drive as well as cardan drive against dirt.4 pairs / 8 piecesValue: 42,90 EURAlloy spur gear carrierUse for 39T - 44 teeth spur gears.Value: 39,90 EURTotal value: 200,30 EURVehicle features:  - Angled 4 mm aluminum chassis  - 26cc 2-stroke gasoline engine  - Completely enclosed belt drive  - Two differential gears on the front and rear axles with hardened bevel gears  - Enclosed front axle housing  - Front and rear bumpers  - Double wishbones on front and rear axles  - Gearbox brake  - Adjustable right/left threaded rods on the tie rods and on the front and rear wishbones  - Steering knuckles with steering stops at the front  - Gears made of case-hardened steel, completely ball-bearing mounted  - Four large-volume oil pressure shock absorbers  - Receiver box The model is equipped with a powerful 26ccm combustion engine with silencer and ready-to-use oiled air filter. It requires a normal 2-stroke gasoline-oil mixture (available at any gas station). The tank capacity of 0.7 liters allows for a driving time of about 45 minutes. Thanks to the built-in pull starter, the engine can be started easily without external starting aid. The RTR version comes with a mounted and adjusted remote control system and rechargeable batteries. All standard servos and remote controls are suitable for completing the non-RTR models. Dimensions and weight:  - Length 770 mm  - Width 480 mm  - Height 320 mm  - Wheelbase 485 mm  - Weight approx. 12 kg  1 piece

Incl. TT1030 Top Tuning CAR-STAND. worth €219.99 free of charge.Competition-OnRoad RC car with the latest technical developments.  Unique among the large scale models. New stabilizer bar construction front and rear. Ball stabiliszers or frame stabilizers can be used (accessories). 10 mm thick chassis made of T7075 aluminium with cut-outs for weights (also under the tank) and grooves in the front area. This allows the vehicle to be perfectly adapted to the track or the driver. The engine is now again bolted to the chassis for more stiffness. Optimally designed wishbones on front and rear suspension. Reinforced and with toe-in adjustability, which is performed via aluminum wedges. Front upper wishbone for more adjustment possibilities. All gears with fine pitch.Since 1997, i.e. since the beginning of the 1:5 RC car scene, FG Modellsport has been represented with team drivers worldwide at national and international competitions. With the Competition-EVO series, FG won most world championships and almost all European championships. Content Top suspension with 10 mm T7075 aluminum chassis plate Zenoah G230RC Engine Adjustable Tuning Clutch Air filter / Airbox Tuned pipe system Front and rear hydraulic brakes Differential Large volume shock absorbers, black anodized Wheels and rimsYou will also need: - 1:5 scale body with a 530/535 wheelbase - Complete radio control system (transmitter and receiver) - 2 throttle/brake servos and 1 steering servo - Receiver battery

inclusive:Product information "TT56112/520 Top Tuning Monster Brushless Motor 520kV"Genuine Top Tuning spare/option part.SpecificationsMax. amps: 129 AMax. voltage: 57 VMax. power: 7,350 WKV (RPM/Volt): 520 KVMounting hole depth: 8 mmBolt pattern: 4 x M4 at 30 mm pitch circle diameterCase diameter: 57.8 mmCase length: 112 mmFree shaft length: 30 mmShaft diameter: 8 mmWeight: 1260 gConnector: 6.5 mm diameterCable size: 8AWGFeaturesHigh quality bearings4Pole rotor with high quality magnetsStator - super thin silicon steel layersSuper strength 8 mm shaftCNC Aluminium heatsink caseCopper wires with high temperature enduranceContents:1 pieceandProduct information "HW3010420 Hobbywing Ezrun MAX5 HV G2 ESC 250 A, 6-12s LiPo, BEC 8A"The EzRun MAX5 HV G2 is an impressive brushless controller with high-voltage capability. With support for up to 12S LiPo and a maximum output current of 250A, it delivers explosive performance and outstanding linearity. Thanks to intelligent freewheel technology, the speed control remains relaxed and cool even during demanding driving manoeuvres.  This controller is protected against water and dust in accordance with the IP 67 standard. As a result, the MAX5 HV G2 is naturally suitable for use in all weather conditions and can be operated on various surfaces such as mud, sand, ice, snow and water without damaging the power unit. With a powerful integrated BEC, an anti-spark design and multi-directional protection, this controller offers advanced features and high safety. The EzRun MAX5 HV G2 is the ideal choice for RC enthusiasts looking for maximum potential and reliability. By recording and storing real-time data, the operating status can even be monitored. And the upgrade of the sensor cable interface greatly improves the protection and waterproof performance of the controller. With perfect compatibility with Hobbywing's EzRun 56118 SD G2 motor, this power system offers an unbeatable team for optimum performance and protection against overheating.Features - Now with even more power than its predecessor. - Water & dust proof for use in all weather conditions. - Built-in ultra-powerful switching mode BEC to drive a wide range of servos (high power / high voltage servo). - Turbo timing setting included. Especially recommended with the matching motor (e.g. EZRUN 56118SD G2). - Several protective functions: Battery undervoltage protection, controller and motor overheating protection, signal loss protection, current protection. - Supports LED programme card, LCD G2 programme box and the OTA programming module for easier setting of controller parameters. - Data logging function to display various running data in the HW LINK app using the OTA Bluetooth module. - Supports controller firmware upgrade (multifunction LCD-G2 programme box or OTA programming module required for purchase). - Capacitor capacity increased by 45%. - 12 adjustable parameters.technical Data :Type: 1/5 Brushless Sensored Current (continuous/short): 250A / 1600A Input voltage: 6-12S LiPo BEC: 6V/7.4V/8.4V @8A (switch mode) Motor types: Brushless motors (with/without sensor) Motor limits: - 8S Lipo: KV <= 1200 - 12S Lipo: KV <= 800 56118 motor Fan: Yes, operated via the BEC Programming: LED programming card LCD programming box (G2) OTA programming module Separate programming connection Waterproof: Yes Output: 8.00mm Bullet Connector (female) Size: 94.5x59.4x50.9mm Weight: 428.5g Applications: 1/5 buggy, truck Scope of delivery:  Ezrun MAX5 HV G2 ESCBUILD YOUR OWN ORIGINAL,AUTHENTIC HPI BAJA 5BHPI large scale fans, we have heard you! The one and only original HPI Baja 5B is BACK and ready for you to build from the ground up! The HPI SBK collection of Self Build Kits grows with the addition of not just one, but TWO 1/5th scale HPI kits! Fans of large scale off-road RC will be super excited to build their own gas-powered 1/5th scale Buggy with the HPI Baja 5B Self Build Kit!When the HPI Baja 5B buggy was first introduced, large scale RC was very expensive and quite difficult for the average RC hobbyist to experience. Using highly durable parts and innovative design features, HPI brought large scale off-road to new enthusiasts and ushered in a new, BIGGER era of RC!Now, YOU can build and own the legend! Experience the thrill and excitement of building a car which ends up being over 80cm (nearly 32 inches) long and weighing nearly 10kg (over 21 lb)! Just install your own engine and electronics as you build the HPI Baja 5B and you'll be ready for any adventure that comes your way!With extra-tough drivetrain parts like the viscous torque differential, super-durable composite spur gear with internal damping and all-metal drivetrain, the HPI Baja 5B is ready for your 23-32cc 2-stroke engine so you can experience the joy of gas-powered RC and up to 30-minute runtimes!The HPI Baja 5B is also equipped with extra-big and super-tough suspension parts, featuring awesome HPI durability! With its expertly designed molded composite suspension plus extra-long adjustable HD shocks, and massive high impact nylon 3-piece beadlock wheels, the Baja 5B is ready for full-speed racing on any off-road circuit!The 4mm thick 6061 aluminum monocoque chassis gives the HPI Baja 5B the classic desert racing buggy look. Precisely bent into shape for maximum strength, the chassis provides the mounting points for the engine and suspension, forming the backbone of the car. Precise steering is provided by a dual-bellcrank rack and cam-type servo saver. Aluminum parts are anodized in cool gunmetal and the classic Baja desert racer clear polycarbonate body is included in the SBK kit, ready for your custom racing scheme!The Baja 5B SBK is a great addition to your HPI collection, as well as a fabulous introduction to large scale buggies!RACING CHASSIS DESIGN & LAYOUTThe narrow channel chassis made from rigid 4mm 6061 aircraft aluminum and gives the HPI Baja 5B a classic desert racing buggy look and extreme stiffness and durability. The U-shaped chassis is protected at the rear with a thick plastic skid plate for extra protection to the motor and drivetrain.The tube roll cage is made of high impact nylon and topped with a real aluminum roof to carry on the classic looks. The roll cage is fully functional and protects the motor and internals from crash damage. The roll cage, radio box, body panels, wing, undertray and gear case are all mounted with fast access clips for easy maintenance.To finish you need:Engine with clutch and exhaustRemote control with servos and receiver batteryChargerTwo cans of Lexan paintFeatures SummaryUnassembled 1/5th scale electric-powered Off-Road BuggyStreamlined HPI Baja 5B Flux body designAdjustable motor mountAdjustable HD shock absorbersMonocoque chassisLow CG for superior handlingLong travel suspensionViscous torque oil-filled gear differentialAll-terrain tiresBeadlock wheels with metal insert hubsAluminum rear shock towerHard plastic skid platesAdjustable rear wingQuick access to all critical maintenance pointsDual bellcrank steeringCam type servo saverHex socket hardwareGunmetal anodizingFull set of rubber-sealed ball bearingsEnclosed receiver boxChassis SpecificationsOverall Length 817mmHeight: 255mmWidth: Front - 460mm; Rear - 480mmTire Track (to center of tires): Front - 395mm; Rear - 400mmWheelbase: 570mmRide Height: 76mmSuspension Travel: Front - 95mm; Rear - 100mmWeight: 9.6kg (21.3lb)Adjustable Camber: front - shims; rear - screwFront caster: adjustable with shim 22 / 25.5* / 29 degrees (* stock)Toe-in: Front adjustable with tie rod; Rear adjustable with inserts 0-4 degrees (3 degrees stock set-up)Aircraft aluminum 6061 T6 monocoque chassisDouble wishbone suspension with adjustable roll center F/RDrive system: HD metal gears with sealed gear box (8.382:1 gear ratio)Differential: viscous torque control with 4 pinion gears; sealed diff case with silicone oilShock absorber: HD Aluminum coilover shock absorber with fully adjustable preload collarWheel type: 3-piece beadlock design, high impact nylon material with inset heavy-duty metal hex hub

Genuine Top Tuning spare/option part. All aluminum parts are made of 7075 alloy.Front motor mount design to assure ample clearance for the rear brake disc when running mechanical brakes.Accepts two batteries up to 164 mm long und 50 mm wide. Rear motor clamps:Diameter 55,75 mm i.e. for Losi Spektrum 780 kV Diameter 57 mm i.e. for Tenshock, Castle, or Spektrum 780kVDiameter 57,8 mm i.e. for Leopard 58 lineDiameter 60 mm i.e. for LehnerDiameter 70 mm i.e. for BP70120 ZTW Beast Brushless engine 620 kVPlease note: This set does not include Motor or ESC. There are two different diameter versions of the Spektrum 780kV motor on the market. Please verify by doing your own measurements before placing an order!This conversion kit is for the 5ive-T 2.0 only. It even allows for running the big BP70120 ZTW Beast Brushless motor in combination with mechanical brakes! The center diff will be turned around between its mounting pillars for installation. Driving batteries with the following maximum dimensions can be installed: Length: 165 mm Width: 51 mm Height: variable The speed controller (ESC) requires EC8 connections or corresponding ! Contents:Motor mount with your choice of rear clamp for 57 / 57.8 / 60 / 70 mm motor diameterBattery carrier plate made of 3 mm epoxy with aluminum brackets for the hook-and-loop bands4 hook-and-loop bands to secure the batteriesaluminum mounting pedestals for the battery plate17T pinion with 8 mm bore diameterMounting screws

Highlights News 2026 Tuning aluminium lower wishbones, one-piece (front and rear) FG hydraulic brakes front and rearTuning chassis plate black anodised and milled Tuning milled aluminium rear axle linkage for toe-in adjustment  Perforated tuning clutch bell Side flaps on the rear spoiler in carbon fibre Highlights Formel 1 Competition- This model is fitted with numerous aluminium parts: - front and rear side bulkheads, rockers, engine mount, suspension arm ends...Steel made Uniball sockets all possible enable all adjustments of the front and rear suspensions.The transmission made with a gearwheell drive offers outstanding reliability and smooth operation.Technical description of the FG Formula 1 Competition :The undercarriage of the FG Formula 1 Competition is built on an 5mm alloy chassis. All screws at the bottom of the chassis are countersunk.Front and rear axle mounts as well as the engine unit are connected over the complete length of the chassis, therefore we achieved almost the stiffness of a monocoque chassis. The quick fix system of the engine makes a fast changing of the engine possible. The drive to the rear axle is carried out over several easy-running front gearwheels and an FG ball drive at the rear axle. A separate flange bearing holds the clutch bell in order to relieve the crankshaft. Front and rear axle with their various adjusting possibilities as king pin angle, castor a.s.o. consist of alloy delta wishbones below. Solid alloy rear axle plates reduce the wear at the rear axle and give an enormous driving stability. 4 oil-pressure shock absorbers controlled by a pushrod suspension as well as stabilizers guarantee an optimal ground contact.We deliver the chassis selectively with FG hydraulic brakes for front or respectively rear axle. The model is powered by a high-capacity 26 cm³ engine with airbox and Tuning pipe.Equipment of the FG Formula 1 Competition CNC-cut 5mm alloy chassis with lateral carbon fiber inserts, 26 cm³ Zenoah engine, inlet silencer, Tuning pipe, FG gearwheel drive, ball drive, complete rear and front axle carrier unit with integrated engine quick-fixing device, double alloy wishbone fastenings, lower alloy delta wishbones at front and rear axle, front and rear alloy uprights, ball-bearing servo saver, steering stops, pushrods, 4 oil-pressure shock absorbers with alloy damper pistons, FG hydraulic brakes at front and rear, stabilizer for front and rear axle, 10mm alloy balls, rear spoiler, polycarbonate body shell, polyamide front spoiler, receiver box, competition tires with tire inserts.For the final assembly of the models you need further: radio control system (transmitter, receiver), 1 large steering servos, 2 servo for throttle brake, batteries and charger.These parts are not included and must be supplied or ordered separately when the rc installation option is selected! Includet Zenoah 26cc engineAirboxPipe Clear bodyshell and polycarbonate spoiler FG hydraulik brakes front and rearDimensions Length: 960mm Width: 440mm Height: 230mm Wheelbase: 620mm Formular 1 models in action!

Advanced, user-friendly Smart G2 charging technology that fits into any hobby budgetDelivers 2x50W of charging power and charges two batteries simultaneously or use a single channel for up to 100W of power.Includes selectable IC3® and IC5® charging ports — no separate adapters requiredCharges AND balances Smart G2 batteries with one simple IC3® or IC5® connection — no separate balance lead neededCharges 1 - 4S LiPo/LiFe/LiIon/LiHV, 1 - 12S NiMH NiCd batteriesS250 AC 2x50W Smart Charger EU Version FeaturesAdvanced, user-friendly Smart G2 charging technology that fits into any hobby budgetDelivers 2x50W of charging power and charges two batteries simultaneously or use a single channel for up to 80W of power.Includes selectable IC3® and IC5® charging ports — no separate adapters requiredCharges AND balances Smart G2 batteries with one simple IC3® or IC5® connection — no separate balance lead neededCharges 1 - 4S LiPo/LiFe/LiIon/LiHV, 1 - 12S NiCd and 1 - 12S Smart NiMH batteriesColor LCD screen interface features intuitive menus, icons and navigation toolsClock counts down remaining charge time until your Smart battery is fully charged and ready to useCharges virtually any Smart batteryAuto Charge recognizes Smart battery charging parameters and starts charging automatically when connectedUSB-C input for updating firmwareIncludes an efficient, low-noise cooling fanSELECT IC3® or IC5® CHARGING OUTPUTThe Spektrum™ S250 Smart AC Charger includes IC3® and IC5® output ports for charging your Smart batteries without adapters. Use the slider to select either the IC3® or IC5® port and then charge your battery — at up to 50W power per channel or 80W on one channel for fast charging. You can charge AND balance Smart G2 batteries with one simple IC3® or IC5® connection. No separate balance lead is required.IMPROVED USER INTERFACETo provide the easiest, most helpful, and most hassle-free charging experience, the S250 Smart AC Charger includes a color LCD screen and updated user interface with improved menus, icons, and navigation tools — plus non-slip, easy to use buttons. For maximum safety, simplicity, and charging ease, a new Auto Charge feature recognizes Smart battery charging parameters as soon as you connect your pack and begins proper charging automatically.CHARGE TIME REMAINING CLOCKIn real time, a clock on the S250 Smart AC charger's screen counts down the minutes until your Smart battery is fully charged and ready to be used.S250 AC 2x50W Smart Charger EU Version Product SpecsApplicationRC model battery chargerBattery Balance ConnectorJST-XHBattery Temperature MonitoringYesBattery TypeLiFe (3.3V per cell), LiHV (3.8V per cell), LiIon (3.3V per cell), LiPo (3.7V per cell), NiCd (1.2V per cell), NiMH (1.2V per cell), Non Smart, Pb (2.0V per cell), Smart, Smart NiMH (1.2V per cell)Charge Protection CircuitryYesConnector TypeIC3, IC5DisplayLCDInput Voltage100-240V ACIntegrated BalancingYes - Internal Balancer & Internal AdapterLiPo Compatibility4SMaximum Charge Rate8AMaximum Continuous Discharge Current1.5ANumber of Output Ports2Peak DetectionYesProduct Height2.04" (52 mm)Product Length4.33" (110 mm)Product Weight15.34oz (435g)Product Width4.64" (118 mm)ProgrammableYesReverse Polarity ProtectionYesSafety TimerYesSelectable Charge RateYesShort Circuit ProtectionYesSoftware UpdatesYesTechnologySmartThermal ProtectionYesVoltage MeterYesSLEEK CASE DESIGNThe charger's sleek case fits perfectly on your workbench and in your pit or field bag. Its power cord is detachable for easy transport. USB-C input and output ports enable you to update charger firmware and to charge secondary devices. Other features include sleep mode and low-noise cooling fan.

Genuine GPM spare/option part. GPM rear shock tower for Arrma Kraton / front and rear Outcast 8S, CNC- machined from 6061-T6 aluminum. More torsion-resistant than the standard plastic parts.The scope of delivery also includes the necessary screws!Direct replacement for original part ARA320476.Contents:1 piece