LOSB2581 Losi Mud Flap & Retainer Set 5T, 2 pcs.
€9.99
Currently unavailable
Product information "LOSB2581 Losi Mud Flap & Retainer Set 5T, 2 pcs."
Mud Flap & Retainer Set 5T, 2 pcs.
Inclusive mounting parts.
Login
Accessories / Spare parts
Chassis mud flaps for the Losi 5ive-T, made of 1.0 mm extremely durable plastic material. The mud flaps are precisely contoured to follow the 5ive-Ts roll cage and body shell. Die-cut and ready for installation featuring 15 eyelets in 3 different sizes and 4 each form and hole punchings to fit the roll cage brackets. The set also includes complete hardware for installation and an illustrated manual! Dimensions of mud flaps (laying flat): 930 x 135 mm Set includes: 2 x protective cover (right and left) 6 x cable clip 14 x fixing screws 12 x washers 1 x manual
Customers also bought
Genuine Top Tuning spare/option part.Losi 5ive-B and Mini front a-arms made by Top Tuning, machined from high grade 7075-T6 aluminum, with replaceable bushings. Made in Germany. These a-arms are designed to work with the stock aluminum guide bushings (LOSB2074), which also serve to hold the C-hubs in the a-arms. The screws in the C-Hubs can therefore be tightened as usual, without binding the assembly. The supplied shims allow the adjustment of the longitudinal play to the tolerances of C-Hubs from different manufacturers. The a-arms are identical for l/h and r/h side. All necessary hardware included. Set of 2 top quality a-arms. Contents:2 x 7075 aluminum front a-arm2 x set screw M8 x 252 x low height nut M82 x socket head screw M5 x 252 x socket head screw M4 x 204 x shim 9 x 15 x 0.52 x shim 9 x 15 x 0.2
Genuine Top Tuning spare/option part.Losi 5ive-B and Mini rear a-arms made by Top Tuning, machined from high grade 7075-T6 aluminum, with replaceable bushings. Made in Germany. The a-arms are identical for l/h and r/h side. Contents:2 x 7075 aluminum rear a-arm2 x set screw M8 x 252 x low height nut M82 x socket head screw M5 x 252 x socket head screw M4 x 20
Genuine Losi spare/option part. Contents:1 piece
Genuine HT spare/option part.These hinge pin braces are machined from 7075 aluminum and feature an increased distance between the holes for the hinge pins. They are to be used in place of stock braces LOSB 078F.This allows the use of the front center drive shaft from the 5ive-T LOSB3218 at the wheels. This one is slightly longer than the Mini shaft for the wheels LOS252000, but will be available as spare part in the future. The turnbuckles on steering rods and camber links need some minor readjusting after assembly to restore the correct geometry.At the rear LOSB3218 driveshafts will fit the Mini without modifications. Set with one each front and rear hinge pin brace.Contents:1 set
Genuine MadMax spare/option part.Losi and HPI foam tire inserts from can be used.The BIG DIGGER tires had 84 extremely strong tread blocks on the front tires and 96 on the rears, with more than 1 cm² cross-section and 6 mm tread depth, allow for best power transfer and provide excellent grip even on loose surfaces like sand or soil. Dimensions:Outer diameter: 170 mmTyre width: 60 mmContents:2 pieces / 1 pair Some off-road tires knowledge can be found here!
Customers also viewed
Genuine HT spare/option part.These heavy duty differential drive cups for front or rear differential in a Losi 5ive-T/B or MINI WRC are made of 300M / Böhler V132 steel and are characterized not only by high hardness, but also simultaneously toughness. The service life is therefore much higher than for the stock cups.300M steel is used in motorsport and aviation for high strength parts. As a highly pure material, it is significantly more expensive than conventional steels, its high basic strength and toughness make the machining a time-consuming task.The shape of these drive cups now allows the use of driveshaft boots and grease lubrication, which increases service life enormously. In addition, these HD drive cups have two sets of slots for the pin of the drive shaft, this means another doubling of the service life.We recommend y0809 Klüber grease for lubrication of closed HD drive cups.A dry run like with stock parts is theoretically possible, but absolutely not recommended because it would waive the enormous advantage of encapsulated lubrication and the associated wear reduction. The set for the rear includes modified stock alloy bearing carriers, which provide improved clearance for the driveshaft boots.You can find advices for installation at the specifications-tab.Contents:Front set:2 pieces of 300M steel HD differential drive cup, front and rear application2 pieces of driveshaft bootsRear set:2 pieces of 300M steel HD differential drive cup, front and rear application1 pair of modified bearing carriers2 pieces of driveshaft boots
Item N° LOSB 3214 Center Diff Outdrive Set 5T, 2 pcs.Content:2 Pieces
Fits Losi 5ive-T, 5ive Mini and many more. Wire thickness: 2 mm.Length: 35 mm.Content:10 pieces
Item N° LOSB2577Front Cage Support Set 5T
Genuine Mecatech spare/option part for the FW01.Contents:1 piece
Genuine Losi spare/option part. Contents:12 pieces
Genuine Losi spare/option part. Replacement part for Losi 23/26/29 cm³ engine with item number: LOSR5001.Contents:1 piece