Skip to main content
EXTRA 20% off Outlet*. Use Code: EXTRA20 at checkout!!
+49 2151 820200 Mon-Fri 9 am - 6 pm, Sa 9 am - 1 pm

LOS354007 Losi Aluminum Lower Rear Trailing Arms, Super Baja Rey / Rock Rey

Product information "LOS354007 Losi Aluminum Lower Rear Trailing Arms, Super Baja Rey / Rock Rey"

Genuine Losi spare/option part.

Contents:
  • 2 pieces

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Customers also bought

Average rating of 0 out of 5 stars

y1408/01 MadMax OVER LANDER 170x80/x60 tires for HPI + Losi (24 mm hex drive)
OVER LANDER 170 x 80 mm and 170 x 60 mm tires with reinforced beadlock rings on black rims. The OVER LANDER were designed as all-terrain tires that can be used on virtually all surfaces because of its tightly attached lug tread pattern When a terrain includes sand, gravel and grass, the Overlander is the right choice! It can even be used on partially paved tracks!Of course, the OVER LANDER allround tire will not make special purpose tires like the TARMAC BUSTER,BIG DIGGER or CROSS BOND obsolete. Due to the extreme load created by the MadMax OVER LANDER tires the rim was optimized again with a reinforcement ring.The tires are fitted with a special rigid insert, which can handle the cornering forces and maintain the tires shape even on heavy cars. We recommend to check the beadlock screws after the run. Dimensions:Outer diameter: 170 mmFront tire width: 60 mmRear tire width: 80 mmReinforced 24 mm hex wheel drive The video shows the 18 mm square drive version. Also available with 24 mm hex. Some off-road tires knowledge can be found here!

€119.90*

Average rating of 0 out of 5 stars

LOS45007 Beadlock Set, Inner & Outer fluorescent orange 5T
Genuine Losi spare/option part.The set is for two tires (one pair).Content:1 set

€19.99*

Average rating of 0 out of 5 stars

LOS254069 Losi Shock Stand Off, Front, Super Baja Rey 2.0
Genuine Losi spare/option part. Contents:2 pieces

€19.99*

Average rating of 0 out of 5 stars

SSB160A GPM Stainless steel trailing arm and steering linkage set for Losi Super Baja Rey
The GPM stainless steel trailing arm and steering linkage set for Losi Super Baja Rey contains a billet aluminum servo arm, the link rod from servo to servo saver, the steering rods and the upper trailing arms. Turnbuckle style rods made of stainless steel are used. This allows to change the length of these rods easily without disassembly and the suspension setup can be changed.

€54.90*

Average rating of 0 out of 5 stars

LOS354006 Losi Alloy Axle Housing Upper Track Rod Mount, Super Baja Rey / 2.0 / Rock Rey
Genuine Losi spare/option part. Contents:1 pieces

€69.99*
%

Average rating of 0 out of 5 stars

SB018 GPM aluminum motor mount with cooling fins for Losi Super Baja Rey / 2.0 / Rock Rey
Genuine GPM spare/option part. Motor mount with cooling fins for Losi Super Baja Rey / Rock Rey made by GPM, machined from high grade 6061-T6 aluminum. It replaces the weaker cast stock version and adds some cooling to the motor.Contents:1 piece

€32.90* €39.90* (17.54% saved)

Similar products

Average rating of 0 out of 5 stars

y1541 Complete screws/nuts/washer set for Losi Super Baja Rey / Rock Rey
Genuine rc-car-online spare/option part. Komplete set of screws, nuts and washers for the Losi Super Baja Rey.The set includes a total of 321 screws, in different quantities which are all used on the Losi Super Baja Rey / Rock Rey.6 sizes of cap head screws11 sizes of CSH screws13 sizes of button head screws6 sizes of set screws3 sizes of washers4 sizes of self-locking nutsComes in a high quality 190x170x40 mm assortment box.Contents:Cap head screws in 12.9:4 piecesM2x101 piecesM2,5x813 piecesM3x102 piecesM3x122 piecesM3x165 piecesM3x306 piecesM3x45 CSH screws in 10.9:5 piecesM2,5x86 piecesM3x66 piecesM3x1234 piecesM3x161 piecesM4x1010 piecesM4x122 piecesM4x149 piecesM4x166 piecesM4x1814 piecesM4x202 piecesM4x25Button head screws in 10.98 piecesM3x89 piecesM3x195 piecesM3x126 piecesM3x1616 piecesM3x204 piecesM3x304 piecesM3x3512 piecesM4x128 piecesM4x1618 piecesM4x2010 piecesM4x2512 piecesM4x301 piecesM4x35Grub screws:2 piecesM3x63 piecesM4x46 piecesM4x56 piecesM4x61 piecesM5x48 piecesM5x30Washers:Unterlagscheiben:5 piecesM3,25 piecesM4,34 pieces H5 Seeger HalfmoonSelf-locking nuts:4 piecesM335 piecesM4Nuts:2 piecesM45 piecesM5

€44.90*

Average rating of 0 out of 5 stars

LOS255017 Losi Flat Head Screws, M4 x 16 mm
Genuine Losi spare/option part. Contents:10 pieces

€5.99*

Average rating of 0 out of 5 stars

LOS254051 Losi Pivot Ball Set: Super Baja Rey / 2.0 / Super Rock Rey
Genuine Losi spare/option part. Contents:1 set

€39.99*

Average rating of 0 out of 5 stars

LOS255021 Losi Flat Point Screws, M4 x 6mm
Genuine Losi spare/option part. Contents:10 pieces

€5.99*

Average rating of 0 out of 5 stars

LOS351010 Losi Aluminum Steering Servo Mount, Super Baja Rey / 2.0 / Rock Rey
Genuine Losi spare/option part. Please note:This servo mount does not fit the stock servo! It allows the mounting of much more powerful 1/5 servos like K-Power DM4000 / Savöx 236/241 / Spektrum S9010 / Losi S900S etc.Contents:1 piece

€69.99*

Average rating of 0 out of 5 stars

LOS354006 Losi Alloy Axle Housing Upper Track Rod Mount, Super Baja Rey / 2.0 / Rock Rey
Genuine Losi spare/option part. Contents:1 pieces

€69.99*

Average rating of 0 out of 5 stars

LOS255016 Losi Flat Head Screws, M4 x 10 mm
Genuine Losi spare/option part. Contents:10 pieces

€5.99*

Average rating of 0 out of 5 stars

LOS254046 Losi Front Spring, medium, Silver, Super Baja Rey
Genuine Losi spare/option part. Contents:2 pieces

€9.99*

Average rating of 0 out of 5 stars

LOS254044 Losi Shock Shaft, front, Super Baja Rey / 2.0
Genuine Losi spare/option part. Contents:2 pieces

€7.99*

Average rating of 0 out of 5 stars

LOS254049 Losi Upper Trailing Arm, Super Baja Rey / Super Rock Rey
Genuine Losi spare/option part. Contents:2 pieces

€29.99*

Average rating of 0 out of 5 stars

LOS254043 Losi Front & Rear Sway Bar Set, Super Baja Rey / 2.0 / Super Rock Rey
Genuine Losi spare/option part. Contents:1 set

€29.99*

Average rating of 0 out of 5 stars

LOS254045 Losi Shock Shaft, rear, Super Baja Rey / 2.0 / Super Rock Rey
Genuine Losi spare/option part. Contents:2 pieces

€7.99*

Customers also viewed

Average rating of 0 out of 5 stars

TT1013 Top Tuning Shock tower front, Losi 5ive-T/2.0/ Mini and TLR 5ive-B
Genuine Top Tuning spare/option part.Light yet strong version due to reinforcement ribs.Contents:1 piece

€44.90*

Average rating of 0 out of 5 stars

LOS351010 Losi Aluminum Steering Servo Mount, Super Baja Rey / 2.0 / Rock Rey
Genuine Losi spare/option part. Please note:This servo mount does not fit the stock servo! It allows the mounting of much more powerful 1/5 servos like K-Power DM4000 / Savöx 236/241 / Spektrum S9010 / Losi S900S etc.Contents:1 piece

€69.99*

Average rating of 0 out of 5 stars

SB008 GPM Aluminum upper trailing arm mounts for Losi Super Baja Rey / 2.0 / Rock Rey, chassis side
Genuine GPM spare/option part. Upper trailing arm mounts for Losi Super Baja Rey / Rock Rey, chassis side, made by GPM, machined from high grade 6061-T6 aluminum. Much stronger than the stock plastic parts.Contents:2 pieces

€24.90*

Average rating of 0 out of 5 stars

LOS354006 Losi Alloy Axle Housing Upper Track Rod Mount, Super Baja Rey / 2.0 / Rock Rey
Genuine Losi spare/option part. Contents:1 pieces

€69.99*

Average rating of 0 out of 5 stars

AT-DBXL021 ATOP Aluminum front transmission mount for Losi DBXL/DBXL-E/2.0 + MTXL
Genuine ATOP spare/option part. Front transmission mount for Losi DBXL cnc-machined from 6061 aluminum by ATOP.Through the use of aluminum, the problem of torn out threads (incl. the front bumper installation) is eliminated. At the same time the chassis section under the transmission is strengthened and the mounting points for the shock towers are reinforced.Comes with all mounting screws included.This is the new ATOP version with the additional mounting points between transmission housing and transmission bracket for a more secure connection of these parts.Old and new versions are fully compatible, regardless of whether they are made of aluminum or plastic. The parts therefore fit all versions of DBXL and MTXL in any combination.However, the use of the additional mounting points requires the new version of both transmission housing and bracket!Contents:1 piece This article is identical to the article in the video!

€79.90*

Average rating of 0 out of 5 stars

HT Car Bag for all models
car_bag_alle_fga Version: y0550 HT Car Bag for 1/5 scale cars
y0550 HT Car Bag for 1/5 scale cars (Fits FG, HPI, Mecatech FW01, Smartech/Carson a.s.o.)Fits for all 1/5 models for example: FG-: HPI-; Mecatech FW01-; Carson-; Smartech-; Conrads-; Harm-; RS5-; Lauterbacher a.s.oMade from extremely durable fabric, easily washable; with wrap-around shoulder belts and zipper closure.No dirt in the car boot!Dimensions:Length: 95 cmWidth: 50 cmHeight: 30 cmy0551 HT Car Bag for 1/6 scale cars (Fits FG, Smartech/Carson a.s.o.)Fits for all 1/6 models for example: FG Offroad-; Monster/Stadium-; Racetruck-; Carson-; Smartech-; Reely Carbon Fighter; Losi Super Rock Rey, Super Baja Rey, Axial Jeep and any more models. Made from extremely durable fabric, easily washable; with wrap-around shoulder belts and zipper closure. No dirt in the car boot! Dimensions: Length: 70 cm Width: 50 cm Height: 40 cm y0558 HT Car Bag XXL for LOSI 5ive-T, Mini 5ive WRC and Desert Buggy XL and many moreThe XXL version is especially made for the Losi 5ive-T, Mini 5ive WRC, Desert Buggy XL; Arrma Outcast/Kraton; Axial Honcho, Traxxas X-Max/XRT; UFRC GR1/Big Bully. Of course, other 1/5 and 1/6 large scale cars will fit into this bag as well; however, in this case the XXL bag gives you plenty of room for additional accessories. Made from extremely durable fabric, easily washable; with wrap-around shoulder belts and zipper closure. No dirt in the car boot! Dimensions: Length: 100 cm Width: 57 cm Height: 39 cm

€39.90*
Loading...
Upload in progress, please be patient ...
Shopware-Plugin Development Shopware-Agency