LOS350004 Losi L/R Rear Fender Set, Clear, Super Baja Rey

Item N° LOSB 8104/01Body right Fender and Plate black 5TReady for installation with factory applied decals!

Genuine HT spare/option part.Very strong linkage with M6 steel ball joints.M6 threaded rod with lock nuts, balls with holes for M4 screws.Maximum length about 96 mm, but through cutting the M6 rod allows for a minimum length of 48 mm.Significantly stronger than the standard plastic version, and especially recommend when using the Hitec HS-900SGS/HS-1000SGT/HS-1005SGT/HS-1100WP servo, this linkage can be used with "normal" servos as well.The threaded rod is not designed as a turnbuckle for a reason because there is not need to change the adjusted length for this application after installation. The setting accuracy of 0.5 mm (½ turn) means a maximum difference to the ideal length of 0.25 mm. This is always sufficient, the trim on the transmitter handles the final adjustment.On the other hand, a connecting rod with the same thread on both ends will always keep its setting when installed, even when both lock nuts are not tightened against the ball joints. Therefore reliability is higher.Set includes:2 x steel ball joints M62 x flat lock nuts1 x M6 x 60 mm threaded piece for Losi 5ive-T1 x M6 x 80 mm threaded piece for Losi 5ive-T 2.02 x spacer tubesContents:1 piece

Defects:The body shell has several small scratches.Dimensions: Length approx. 670 mm Width approx. 300 mm Height approx. 225.mm Wheelbase approx. 470 mm

This genuine factory painted Losi 5ive-T body shell set with decals .New version of the 5ive-T body shell with scoop on the hood for optimized cooling!The set includes the following genuine parts (unit parts only clear available!):LOS350005 Front sectionLOSB8102 Center sectionLOSB8103 l/h rear fender with plateLOSB8104 r/h rear fender with plateLOS259003 Vehicle decalwith factory paint job on all body parts and decals applied. Delivery without roll cage!

Genuine ARRMA spare/option part. Contents:1 piece

This stadium truck is the perfect model for the entry into the RC large scale sport. The model is fully assembled and can be equipped with an RC system in our shopping cart selection. It is available with Lexan body shell. Limited Edition tune parts:2x 4492 Alu Querlenker hinten untenPreis: 55,70 EUR1x 4475/01 Rear alloy shock mountPrice: 96,10 EUR1x 6423 Gear protectorPrice: 20,70 EUR1x 6499 Alloy front shock towerPrice: 69,70 EUR4x 18001 Alloy a-armPrice: 131,60 EURBase price Stadium Truck Sportsline829,90 EURSurcharge tuning parts:373,80 EURRegular price Limited Edition:1203,70 EURThe Stadium Truck comes top equipped as standard and also offers numerous choices for additional option parts to increase driving performance.Product details:1/6 scale 2WD Stadium Truck with double wishbone independent suspension. 4 mm metal chassis plate. All holes on the underside are countersunkFuel tank and RC components are protected by the bevelled chassis>Adjustable toe-in/out on the front suspensionAdjustable camber on the rear suspension4 large-volume oil pressure shocks absorbers with adjustable spring tension for a smooth ride. The secondary spur gears, differential gears and all drive parts are case hardenedThe stadium truck comes with a powerful 26cm³ FG 260 internal combustion engine. This requires standard 2-stroke gas/oil mix available at every gas station.With a tank capacity of 0.7 litres, a driving time of approx. 40 minutes is achieved.You can select the car with complete RTR-equipment from the options menu. RTR-equipment RTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed. Transmitter 2,4 GHzReceiverHigh power servo for throttle and brakeLargescale servo for steeringTx-battery, rx-battery For an additional charge you can also select the HT-EDITION above. A great tuning offer for your new FG Sportsline. The standard price for the individual parts is €227.35. These tuning parts not only look great, but they also make your model more reliable.HT-Edition?HT-Edition means: this version comes with a big set of spare / option parts included.Steel pinions - Non-standard sizesEach of two different ratios are supplied with.Modul: m=1,5Value: 62,60 EURAlloy engine mount bigCNC machined alloy engine mount, direkt replacement for the stock plastic part, heat and tweak resistant. They come with all necessary hardware included.Value: 64,95 EURAlloy spur gear carrierUse for 39T - 44 teeth spur gears.Value: 39,90 EURBall bearing set, sealed, set of 14The seal rings on sealed ball bearings keep dirt and dust out of the bearings. They are therefore particularly suitable for use in dirty and dusty environments.Value: 59,90 EURTotal value: 227,35 EURDimensionsLength: 730 mmWidth: 510 mmHeight: 360 mmWheelbase: 470 mm