LOS251036 Losi Side Guards left / right MTXL

Genuine Losi spare/option part. Contents:1 piece

Genuine Top Tuning spare/option part.TopTuning 24mm hex wheel drives are required if you want to run wheel combos with the standard 24mm hex drive (such as Losi 5ive-T/B; DBXL; HPI-Baja etc.!) on your Losi Super Baja-Rey, Super Baja Rey 2.0 and Super Rock Rey. Suitable for 8 mm axles.The stock Super Baja-Rey / Super Rock Rey20 mm hex drives (# LOS252077) will be swapped for the TopTuning 24 mm version. No additional parts are required for installation of the 24 mm hex wheel drivers. The Losi Super Baja-Rey's fake brake discs and calipers must be removed prior to assembly.Attention: For the attachment of the wheels you also need wheel nuts with M18x1.5 thread (i.e. AT-5T004), which are also offered in our shop's option menu!Please note: These adapters only fit in combination with the optional aluminum spindles or wheel bearing carriers. The aluminium versions have a slightly larger bearing distance, which requires different dimensions for the wheel drives.As already mentioned in the Losi instruction manual, the gearing should be adjusted depending on terrain and tire tread.Depending on tire size the rear of the fenderwells will need some cutting. Please note: the wide rear wheels from MadMax or HPI do not fit! This applies in particular to aggressive tread large diameter off-road tires and demanding terrain. In this case we recommend the profile regraded, nitrided 15T pinion # TT1021/07 from the TopTuning.Weight per piece 28 grams (original LOS25077 weighs 23 grams).Contents:2 pieces of 24 mm hex wheel drives, machined from 7075 aluminum2 pieces of hardened drive pins 3x23,8 mm

Genuine Losi spare/option part. Contents:1 set

Genuine Losi spare/option part. Fits Losi 5ive-T, TLR 5ive-B and Mini WRC.Dimensionally identical with B59010 / B59011Content:2 pieces

SCOPE OF DELIVERY AND CONDITION SEE PHOTOS. THE ITEM IS SOLD ON BEHALF OF THE CUSTOMER. The item is in excellent condition. Scope of delivery and condition see photos. VRC TUNING PIPE LOSI DESERT BUGGY XLThis VRC exhaust fits the lower mentioned models with engines from 23 to 29 cc.VRC, Victory RC, exhausts guarantee a considerable power gain in the whole RPM. In general, the power of a standard engine is increased by more than one horsepower, and the low end torque by more than 1 Newton meter.Each pipe is made from thin sheet metal and welded and assembled entirely by hand. This VRC exhaust has an internal noise reducer and consists of several chambers for maximum performance. The very pleasant Race Sound and its volume can be compared to that of a Tuned scooter.Mounting tip; Slide the rubber hose over the pipe and mount the manifold and spring. Then mount the assembly hand-tight on the cylinder. If you know for sure that it is in the right place on the car, fix the pipe and mount the cable ties. We recomend to use the TPS6403/32 clambs.It often seems that the exhaust does not fit, but this is not the case. In the beginning there was a tight fit between the pipe and manifold, but due vibrations the cylinder that was fixed with 2 bolts, and/or the exhaust started to tear. Since a few years, that fit has been made wider to prevent this. But this does mean that the exhaust can move more, this also benefits the assembly on the car. Due to the strong spring the exhaust pulls in one direction, so it seems that the exhaust does not fit.Suitable for:LOSI DBXLLOSI DBXL K&NNB! VRC exhausts cannot be returned and/or exchanged due the possible rust building after handling/unpacking!