240 mm wide rear wing center part, spare part for the RS-5 Formula 1 wing. The weight is the same as the RS-5 carbon wing; but the Lightscale plastic wing is significantly tougher and cheaper to replace if necessary. You need Lightscale inserts # 50053930 for installation of the carbon side flaps.

Wing core insert to connect the Lightscale wing body with side mount brackets or winglets. Set includes two inserts.

The Lightscale Camber Gauge is a black anodised alloy block that features 8  different angled planes in 0.5° steps from 0.5° to 4° on different surfaces.
The gauge is to be layed down beside a tyre for negative camber angles and any 90° part is put on one of the planes an pulled towards the tyre. Doing so you can easily check the camber of your tyres. To check positive camber, just turn around the gauge.
Turning the gauge upside down will make it a 10mm high block to support you measuring the droop of any 1/5, 1/6 and 1/10 scale Electric or nitro car. Those are usually put on 10mm support blocks and beeing measured their droop with a special tool. The Lightscale ride height gauge (50160200) is a droop gauge as well and will do the job for you.

Genuine Lightscale spare/option part.Plastic angle mount, for connecting the plastic wing body to the brackets. Set of two angle mounts.Contents:2 pieces

Genuine Lightscale spare/option part.Polycarbonate side mounting brackets (l/h and r/h) for Lightscale touring car rear wing.Contents:2 pieces

Genuine Lightscale spare/option part. The 10 ° downward angled adapter for the Lightscale touring car air box is made ​​from high quality aluminum and uses an O-ring for sealing; which prevents the airbox slipping as well. The adapter features a slight reverse taper on the outside, making it virtually impossible for the airbox to come loose.The aluminum adapter comes with O-ring, screws for installation, gasket and hose clamp included.Contents:1 set

The 10 ° downward angled adapter for the Lightscale touring car air box is made ​​from high quality plastic (weight-reduced) and uses an O-ring for sealing; which prevents the airbox slipping as well. The adapter features a slight reverse taper on the outside, making it virtually impossible for the airbox to come loose.The plastic adapter comes with O-ring, screws for installation, gasket and hose clamp included.

The special tool for Lightscale wheel nuts is simply inserted into the end of a spark plug wrench and is secured there by use of an o-ring. With its 3 hardened pins the tool locates into the wheel nut and may be used to tighten or untighten it. The tool is universally usable for all Lightscale wheel nuts.The kit contains the tool as well as the o-ring and hardened pins. The tool comes ready for use. Due to the high torque load on the bonding of tires on largescale cars, checking the bonding from time to time and re-glueing (y0067) if necessary is unavoidable.

Wheel nut rear for F1 Cars using M6 Thread on the axle.The Lightscale wheelnut is used in combination with the Lightscale lexan disc to convert F1 rims to an up to date and modern look.Thereby the Lightscale wheel nut works just like a real one in present f1 racing. It is tightened with a 22 open end spanner or socket wrench. Alternatively one may use the special Lightscale toolto tighten or loosen the wheel nut.Due to the use of rifled and conical washers a locking effect is achieved.Due to the high torque load on the bonding of tires on largescale cars, checking the bonding from time to time and re-glueing (y0067) if necessary is unavoidable.The kit contains two wheel nutsas well as four rifled conical washersOptional parts: Tool for Lightscale wheel nuts (item code two wheel nutsas well as four rifled conical washersOptional parts: Tool for Lightscale wheel nuts (item code 50100000)

Replacement part for Lightscale air boxes 52023000 (touring cars) and 51023000 (Formula 1).Adaptor is identical for both versions.Content of delivery:- Adaptor- Mounting bolts- Gasket

Wheel nut front for F1 Cars using M6 Thread on the axle.The Lightscale wheelnut is used in combination with the Lightscale lexan disc to convert F1 rims to an up to date and modern look.Thereby the Lightscale wheel nut works just like a real one in present f1 racing. It is tightened with a 22 open end spanner or socket wrench. Alternatively one may use the special Lightscale tool to tighten or loosen the wheel nut.Due to the use of rifled and conical washers a locking effect is achieved.The kit contains 2 wheel nuts as well as 4 rifled conical washers.Optional parts: Tool for Lightscale wheel nuts item code 50100000, Lightscale lexan disc item code 51009500 and spare rifled conical washers item code 881200058801. Due to the high torque load on the bonding of tires on largescale cars, checking the bonding from time to time and re-glueing (y0067) if necessary is unavoidable.

Premium quality Fleece Jacket with enjoyable comfort when worn and first class breathing characteristics. With the Lightscale Fleece Jacket you can show your solidarity with our famous brand and at the same time get a worth while piece of clothing made by the famous manufacturer Result who are known for their excellent textiles worldwide.The Jacket can be used in a temperature range of 8° to 20° Celsius. It keeps you warm in wind and cold conditions but does not make you perspire when the temperature rises. We therefore consider the Lightscale Fleece Jacked can be an item of all season racetrack clothing. The jacket is embroidered nicely and does not affect the comfort. The side pockets offer space for tools or small items while they are nicely incorporated into the jacked without disturbing the slim cut. Full Zip Active Fleece Jacket;Quality:330 g/qm;Material:100 % Polyester-Fleece;Full Zip, big side pockets, nested sleeve,adjustable round cord against wind;colour: black.

Wheel nut front for F1 Cars using M8 Thread on the axle.The Lightscale wheelnut is used in combination with the Lightscale lexan disc to convert F1 rims to an up to date and modern look.Thereby the Lightscale wheel nut works just like a real one in present f1 racing. It is tightened with a 22 open end spanner or socket wrench. Alternatively one may use the special Lightscale tool to tighten or loosen the wheel nut.Due to the use of rifled and conical washers a locking effect is achieved.The kit contains 2 wheel nuts as well as 4 rifled conical washers.Optional parts: Tool for Lightscale wheel nuts item code 50100000, Lightscale lexan disc item code 51009500 and spare rifled conical washers item code 881200058801. Due to the high torque load on the bonding of tires on largescale cars, checking the bonding from time to time and re-glueing (y0067) if necessary is unavoidable.