Skip to main content
EXTRA 20% off Outlet*. Use Code: EXTRA20 at checkout!!
+49 2151 820200 Mon-Fri 9 am - 6 pm, Sa 9 am - 1 pm

F004 Carson Steering Servo 30kg

Product information "F004 Carson Steering Servo 30kg"

Genuine Carson spare/option part.

Dimensions
Lenght approx 63mmWidth approx 33mmHeight approx 55mm

The stronger alternative:
K-Power DM4000 Servo 54kg-cm/0,11 s/6 Volt till 8,4 volt 89,90 EUR
However, the installation requires some "rework" on the servo mount!

Contents:
  • 1 piece

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Alternatives

Average rating of 0 out of 5 stars

y1570 CYS S0650 large scale servo with Double sided alloy servoarm, 55 kg/0,11 sec
CYS S0650, a digital large scale servo with very robust steel gears. It offers a lot of power at good speed. Its a direct fit for cars like Losi 5ive and DBXL, UFRC Growler GX1, FG and so on.Technical data: Operating voltage: 6V-7.4V Operating speed (6.0 V): 0.13 s / 60 degrees Operating speed (7.4 V): 0.11 s / 60 degrees Holding torque (6.0V): 470 Ncm holding torque (7.4V): 539 Ncm Cable: Universal/JR connector, approx. 300mm Gear material: 1st stage brass, all others steel Bearing: 2 x ball bearing Size: 66 x 30 x 56mm Weight: 204 grams Double sided servo arm 68mm length Guide sleeve 4 pieces Mounting screws 4 pieces Mounting screws for servoarm 1 piecesContents:1 piece

€69.90*

Average rating of 0 out of 5 stars

116845 Hitec D845WP Servo 0,17sec. / 50kg

€129.90*

Similar products

Average rating of 0 out of 5 stars

F003/2 Carson Universal On/Off Switch
Genuine Carson spare/option part. Contents:1 piece

€9.90*

Average rating of 0 out of 5 stars

F001 Carson Battery 6V 2000mAh
Genuine Carson spare/option part. Contents:1 piece

€42.90*

Average rating of 0 out of 5 stars

F002 Charger for HPI / Carson receiver battery
Genuine spare/option part. Contents:1 piece

€24.90*

Customers also viewed

Average rating of 0 out of 5 stars

y1570 CYS S0650 large scale servo with Double sided alloy servoarm, 55 kg/0,11 sec
CYS S0650, a digital large scale servo with very robust steel gears. It offers a lot of power at good speed. Its a direct fit for cars like Losi 5ive and DBXL, UFRC Growler GX1, FG and so on.Technical data: Operating voltage: 6V-7.4V Operating speed (6.0 V): 0.13 s / 60 degrees Operating speed (7.4 V): 0.11 s / 60 degrees Holding torque (6.0V): 470 Ncm holding torque (7.4V): 539 Ncm Cable: Universal/JR connector, approx. 300mm Gear material: 1st stage brass, all others steel Bearing: 2 x ball bearing Size: 66 x 30 x 56mm Weight: 204 grams Double sided servo arm 68mm length Guide sleeve 4 pieces Mounting screws 4 pieces Mounting screws for servoarm 1 piecesContents:1 piece

€69.90*

Average rating of 0 out of 5 stars

B58004 HV2060MG Digital Servo (48-62kg)
Power 48 kg with a 6V battery, 62 kg with 2S LiPoDimensions: length 66 mm x width 30 mm x height 56 mmOutput shaft 15T splineContents:1 piece

€79.90*

Average rating of 0 out of 5 stars

SPMS904 WP Digital Servo original Losi
Genuine Losi spare/option part.Specifications Torque: 346 Ncm Speed: 0.216 sec @ 6v Length: 2.33 in (59,1 mm) Width: 1.14 in (29 mm) Height: 2.16 in (54,9 mm) Splint count: 15 toothContents:1 piece

€59.99*

Average rating of 0 out of 5 stars

y0188 Alloy engine mount set for Carson/Smartech 2WD Off-Road + Monster models
Genuine HT spare/option part. CNC machined alloy engine mounts, direkt replacement for the stock plastic parts, heat and tweak resistant. They come with all necessary hardware included.Fit Attack / Touareg / Comanche / Firehammer / TravellerContents:2 pieces

€79.90*

Average rating of 0 out of 5 stars

KE04001 Carson Throttle/brake Servo 20kg
Genuine Carson spare/option part. Dimensions40,8 x 20,1 x 38 mm Contents:1 piece

€39.90*
%

Average rating of 0 out of 5 stars

Hitec HS-1000 SGT Servo 138110, used
Servo HS-1000 SGT Hitec - 138110, usedThe servo was tested in our workshop!It was installed in a Losi 5ive-TDelivery includes the aluminum servo mounts and aluminum servo lever for Losi 5Ive-T.The first servos with this performance, not only for industrial applications, but also for XXL large-scale models. Equipped with a hand-wound brush motor for maximum reliability and durability. Aluminum housing against electromagnetic interference, an indestructible steel gearbox and digital servo electronics are further special features of these servos.Servo HS-1000 SGT Hitec - 138110Actuating force 11.1V: 84.0 kgcmActuating time 11.1 V: 0.26 sec/60 degreesActuating force 14.8 V: 110.0 kg/cmActuating time 14.8 V: 0.19 sec/60degreesDimensions: 64 x 33 x 73 mmWeight: 363 grControl: DigitalBall bearing: YesGear: MetalLength approx: 64 mmWidth approx: 33 mmHeight approx: 73 mmWeight approx: 363 gInput voltage: 11.1-14.8 VoltCondition see photos.

€159.00* €599.00* (73.46% saved)
Loading...
Upload in progress, please be patient ...
Shopware-Agency Shopware-Agency