Exhaust manifold Samba 3 and Samba 5, 2106, 1 pce.

Samba

€44.90*

Prices incl. VAT plus shipping costs

Available

Product number: samba_2106

EAN: 4058575015703

Product information "Exhaust manifold Samba 3 and Samba 5, 2106, 1 pce."

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

No reviews found. Share your insights with others.

Alternatives

y0376 Replacement spring for Samba manifolds - 2 pcs.

Measures:Total length: 55 mmLength of coils: 25 mmWire thickness: 1,25 mm

€4.90*

7406/04, FG O-rings + silicone hose for FG Steel Side Power, 1 pce.

O-rings 20 x 2.5 mmHose 20 x 3 x 45 mm

€13.90*

7333/02 FG Header gasket with heat shield for all Zenoah, CY, Fuelie and more

Genuine FG spare/option part.Fits Zenoah (G230, G240, G260, G270, G290, G320), Chung Yang (CY), Fuelie and HPI engines. Actual product may be of different color. We have no bearing on this since we are not the manufacturer.Please note:It is recommended to use a gasket sealer with every gasket on an engine. This gives better sealing anda longer lasting gasket. We also recommend:y0804 HT-flange sealer 518 y0994 Marston sealery0807 MD-Sil RTV silicone sealerContenst:1 piece

€8.50*

6725/14 FG Socket head cap screws M4x14 mm, 10 pieces

Genuine FG spare/option part.Part is delivered in silver or black color from vendor!Content:10 pieces

€3.20*

Accessories / Spare parts

y0757 Special exhaust manifold screw set, 5 pcs.

Cap screws for 1/5 & 1/6 large scale cars, DIN 912 - 8.8 M5x16 with corresponding external tooth lock washers DIN 679A.The lock washers prevent loosening of the manifold screws.Bag with five each screws and lock washers.Part is delivered in silver or black color from vendor!

€3.90*

y0758 Special exhaust manifold screw set, 5 pcs.

Cap screws for 1/5 & 1/6 large scale cars, DIN 912 - 8.8 M5x16 with corresponding spring washers DIN 127.The spring washer's tension prevents loosening of the manifold screws.Bag with five each screws and spring washers.Part is delivered in silver or black color from vendor!

€3.90*

y0564 RC Tech Pipe Protect 400 ml

Genuine HT spare/option part. RC Tech Pipe Protect protects your exhaust against oil and rubber deposit while racing. A clean exhaust gives better resonance, which means better performance from your engine. Thanks to RC Tech Pipe Protect your exhaust system can evacuate the temperature better.Direction of useSpray a relatively thick layer of Pipe Protect from a close distance; +/- 15/20 cm on your new or just-cleaned and preferably polished exhaust pipe. After each ride clean the exhaust pipe with a clean cloth, if necessary slightly sprayed with some Pipe Protect. Treat the exhaust pipe again before each race.Contents:1 piece / 400 ml

Content: 400 Milliliter (€24.75* / 1000 Milliliter)

€9.90*

y804 HT-flange sealer 518, 50 ml up to 200°C

Especially for installation of all engine gaskets. Temperature resistant from -55 °C to +200 °C. Resistant to water, mineral oils, synthetic lubricants, fuels, organic solvents and refrigerants. info: Hand tight: 10 - 20 minReady to use: 1 - 3 hoursGap fill: 0.5 mmContent: 50 ml Notes for usage: This surface seal is not for use as the sole sealant, it should always be applied in combination with a paper gasket.The HT-surface sealing agent should be sparsely applied over the entire surface, with care being taken that the sealant does not enter the devices internals (e.g. crankcase, differential a.s.o.) during the assembly.

Content: 50 Milliliter (€538.00* / 1000 Milliliter)

€26.90*

Customers also viewed

y0482 Anti-vibration spring hose elbow Samba, 2 pcs.

Protects against vibration and dirt which could jeopardize the spring. The spring is not protected by the rubber tube only, but also relieved.product contents: 2 pcs.

€3.90*

Samba 4160 FG Tuning pipe for FG off road 2WD/4WD models

Tuned pipe exhaust system for racing, fits near all FG 4WD Off-Road and Monster models from the top manufacturer of high performance exhaust systems. Top quality and optimized performance througout the entire engine's RPM range. Complete set with steel manifold and hardware for sealing and installation. Fits:FG Baja Buggy 2WD/4WDFG Marder 2WD/4WDFG Beetle 2WD/4WDFG Monster/Stadium Truck 2WD/4WDFG Monster/Stadium Hummer 2WD/4WDFG Monster/Stadium Jeep 2WD/4WDCan also be used for 530 mm wheelbase off-road Monster/Hummer and shorter wheelbases. Please note that modifications to the body shell are usually required.Due to the increased performance we recommend the use of aluminum engine mounts.

€229.90*

This product is no longer available.

7303 Samba 7 Titan Racing tuned pipe system ESW DMC 50-1101

The Samba 7 titanium gives you a weight saving of 140 grams compared to the steel version. We have tested and optimized the Samba 7 Titan- tuned pipe system for half a year on the engine dyno and an additional three months on various racetracks! The pipe has a new, very strong connection system. This low-maintenance flexible connection between pipe and manifold is secured by four (!) springsDespite of the increased performance fuel consumption remains the same compared to a Samba 6 pipe. The Samba 7 system provides significantly better performance, i.e. the power is optimally available across the engines entire rpm range! New New connection from exhaust to manifold Lower center of gravity through new alignment Also suitable for 510 wheelbaseSamba 7 can also be installed in cars equipped with Magura 2 hydraulic brakes (see pictures).Of course, the Samba 7 tuned pipe system is race legal for racing, with the DMC approval number 50-1101 engraved. The Samba 7 - tuned pipe system comes with an installation kit.Fits: All On-road cars from FGContrastBergonzoniHarmGeniusand many others as well<Will fit medium (510 mm) wheelbase cars from FG as wellOriginal statement from Samba: "This new tuned pipe system is the result of the development"

€399.00*