AREA-BJ035/06 Replace Epoxy plate for BJ035
Product number:
area_ar_bj_035_06
EAN:
4058575110545
Product information "AREA-BJ035/06 Replace Epoxy plate for BJ035"
Genuine Area RC spare/option part.
Spare part sealings for Area reed valve system BJ035.
Contents:
Spare part sealings for Area reed valve system BJ035.
Contents:
- 1 piece
Login
Similar products
This reed valve system converts a normal piston-port engine into a reed valve engine. It offers the advantage of increased intake duration for a better charge for more power. As a positive side effect no fresh gas loss occurs during the downward movement of the piston because the membranes close this path.The reed valve block replaces the usual stock insulator. To use the advantage of the reed system, it is necessary to modify the piston skirt on the intake side. Depending on the engine it is advantageous for best results, to slightly match the cylinders intake port to the Epoxy insulator plate at the bottom of the reed valve system. Both steps are described in the installation instructions for Zenoah and Chung Yang engines. Our thanks for these instructions go to our customer Thomas Hoenicke.Note: For the time being the epoxy insulator plate must be slightly reworked to fit a G320 Zenoah engine. The manual has been written with the conversion of a G320, the affected area for modification is therefore shown.The unit is 24.5 mm high.
Genuine Area RC spare/option part. Spare sealings for Area reed valve system BJ035 till 29 cm³.Contents:1 piece
y1396 Version:
y1396/29 - Zenoah G290
Genuine Zenoah piston with machined recess for use with Are reed valve block BJ035. Please note: Differing widths of the remaining webs of the piston skirt are caused by production spread of the pistons.Version:y1396/29 - Zenoah G290y1396/32 - Zenoah G320Content:1 piece