AREA-5T-016 Aluminum rear skid plate Losi 5ive-T and Mini

€19.90*

Available

Product number: area_ar_l016

EAN: 4058575055631

Product information "AREA-5T-016 Aluminum rear skid plate Losi 5ive-T and Mini"

Genuine Losi spare/option part.

CNC-machined from 6061-T6 aluminum by Area RC.

Protects chassis plate and transmission case over rough terrain. Also reinforces the chassis plates narrow section in front of the gear case. Thickness: 4 mm, weight: 85 grams.

Content:

1 piece

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Similar products

AT-5T004 ATOP Aluminum closed wheel nuts Losi 5ive-T/2.0/B, Mini, DBXL/2.0 and MTXL

Genuine ATOP spare/option part.CNC-machined from 6061-T6 aluminum by ATOP. Closed design, thread size M18 x 1,5 for Losi 5ive-T/B, Mini, DBXL and MTXL. Wrench size 24 mm, may fit other cars as well.Contents:4 pieces

€22.90*

Details

LO5T153 GPM Piggyback reservoir Shocks Losi 5ive-T/2.0/B/Mini, front set

Genuine GPM spare/option part. The GPM piggyback reservoir shocks increase the oil volume and the separate vent screw makes filling the shocks easier. Shocks come in pairs including all-metal lower ball joints, spring perches and springs with 2.75 mm wire diameter.These technically demanding, excellently manufactured GPM Piggyback shocks come ready for use, assembled and filled with 1000 viscosity silicone oil. For a possible fine tuning (less damping with lower viscosity, more with higher viscosity) we recommend our silicone oils y0038 (50 ml) or y0039 (100 ml). Approximately 23 cm³ of oil is required to fill one shock absorber.Suitable for Losi 5ive-T, 5ive-B and Mini.The shocks are compatible with all springs offered for these vehicles such as Front:Length extended/compressed (center-to-center of mounting points): approx. 156 mm/110 mm.Contents:2 pieces / 1 pairs

€139.90*

y0722 Axle plugs for Losi 5ive-T/2.0, Mini

y0722 Quanity: y0722/01 - Set of 4

For sealing the axles on Losi 5ive-T and Mini cars, keeps debris out of the inner screws which secure the retainer pin. Set of 4 or set of 10 to choice.Can be used for Losi 5ive-T, Mini and HPI Baja cars.

€3.90*

y0057 Ball & socket tool for Losi and HPI

Genuine HT spare/option part. Ball & socket tool with t-handle, special version for the ball joints.Fits Losi 5ive-T. 5ive-B, Desert Buggy XL, Desert Buggy XL-E, Monster Truck XL and the HPI Baja 5B and Baja 5R Ford Mustang.Contents:1 piece

€17.90*

AREA-5T-018 Aluminum spring perches Losi 5ive-T/2.0/B and Mini

Genuine FG spare/option part.CNC-machined from 6061-T6 aluminum by Area RC.Contents:2 piece

€19.90*

Details

AT-5T018 ATOP Aluminum spring perches Losi 5ive-T/2.0/B and Mini

Genuine FG spare/option part.CNC-machined from 6061-T6 aluminum by Atop RC. Contents:2 piece

From €19.90*

Details

y0041 Aluminum spring perches for Losi 5ive-T/2.0/B and Mini shocks

Genuine HT spare/option part.Aluminum spring perches for Losi 5ive-T/B and Mini shocks; with slot for fast and easy change of shock springs. Direct replacement for the stock plastic part.Contents:2 pieces

From €19.90*

Details

AT-5T006/007 ATOP Aluminum front and rear skid plate Losi 5ive-T/2.0 and Mini

Genuine ATOP spare/option part.CNC-machined from 6061-T6 aluminum by ATOP.Protects chassis plate and transmission case over rough terrain. Also reinforces the chassis plates narrow section in front of the gear case. Thickness: 4 mm, weight: complete 141 grams.Contents:1 set

€49.90*

AT-5T026 ATOP Aluminum spindles front for Losi 5ive-T/2.0/B and Mini

Genuine Atop spare/option part.CNC-machined 6061-T6 aluminum front spindles from Area RC; fits Losi 5ive-T/B and Mini. Significantly more rigid than the stock plastic partthese spindles improve steering precision and tracking.They also feature larger outer bearings (12 x 28 x 7 mm) than stock for higher load capacity. All four ball bearings are sealing bearings.Contents:2 pieces

€79.90*

AT-5T005 ATOP Aluminum axle extenders Losi 5ive-T/2.0/B, Mini, with closed nuts

Genuine ATOP spare/option part.CNC-machined from 6061-T6 aluminum by ATOP RC, increase track width for 25 mm and allow for the use of HPI 5T, Losi 5ive-T, 5ive-B and Mini rims. 5 mm o-rings protect against drive pin loss. Set of four inclusive o-rings, drive pins and closed wheel nuts (wrench size 24 mm!).Contents:1 set

€49.90*

AT-5T015 ATOP Aluminum front transmission case Losi 5ive-T/2.0/B and Mini

Genuine ATOP spare/option part.Completely cnc-machined front transmission case from billet 6061-T6 aluminum by Atop. Service life of ball bearings and ring & pinion will greatly benefit from the increased strength of this aluminum case. It also ends the problem of stripped tread holes for the mounting screws. Weight:approx. 297 gramsContents:1 piece

€159.90*

AT-5T003 ATOP Aluminum top chassis brace Losi 5ive-T/2.0 and Mini

Genuine ATOP spare/option part. CNC-machined from 6061-T6 aluminum by ATOP.Complete with all required hardware.Contents:1 piece

€29.90*

Customers also viewed

AT-5T001/002 ATOP Chassis brace Losi 5ive-T/2.0, front and rear

Genuine ATOP spare/option part. CNC-machined from 6061-T6 aluminum by ATOP.New improved designs combines increased strength with reduced weight. Both together give a total weight of 130 grams.Contents:2 pieces

€64.90*

HURRAX extreme Race tires glued on GRP Disc rim 24 mm hex 4 pieces

You can select the tyre hardness above: - Hurrax HX100 extreme Grip Medium 175/70 mm tyre and - Hurrax HX400 extreme Grip Soft 175/70 mm tyre HURRAX extreme is one of the most successful tire in large scale off-road racing and specifically designed for astro turf and solid ground. With more than 700 (!) differently designed, closely spaced lugs and the 70 mm wide tread it is reasonably wear resistant and provides optimal grip with good side traction. If this - i.e. on the front axle - is not desired, you may cut the lugs at the tires outer edge to reduce cornering grip. This can be easily done with a small side cutter or strong nail scissors. In order to reduce the edging in the tire on the front axle.This makes a tire less aggressive during cornering and changes the cars behavior towards understeer. It becomes depending on the track conditions (i.e. wet!) a lot more drivable.An optimal vehicle setup can often be achieved by running already used HURRAX extreme tires on the front and new ones on the rear axle.This is especially true for 2WD models. Dimensions:External diameter approx. 175 mmInner diameter approx. 130 mmWidth approx. 70 mmWeight: one glued tire on Hurrax rim: 470 gramsDue to the high torque load on the bonding of tires on largescale cars, checking the bonding from time to time and re-glueing (y0067) if necessary is unavoidable. GRP off-road disc rim for tires with approx, 132 mm inner diameter.The closed disc rim features reinforcement ribs on the backside and a protective collar around the wheel nut seat.Dimensions:for tires with an inner diameter of approx. 132 mm and approx. 70 mm widthand an outer diameter of approx. 180 mm (like i.e. GRP / Gandini tires)Weight approx. 172 gramms

€99.80*

Details

AT-5T006 ATOP Aluminum front skid plate Losi 5ive-T/2.0/B and Mini

Genuine ATOP spare/option part.CNC-machined from 6061-T6 aluminum by ATOP.Protects chassis plate and transmission case over rough terrain. Thickness: 4 mm, weight: 49 grams.Contents:1 piece

€24.90*

AT-5T006/007 ATOP Aluminum front and rear skid plate Losi 5ive-T/2.0 and Mini

€49.90*