7906 FG Hobbywing program card
Product information "7906 FG Hobbywing program card"
Genuine FG spare/option part.
Small and light program card for mobile use to change or adjust parameters of brushless control FG order number: 7905 fast and clearly. Display of parameters and data through two large LED segments.
Contents:
Small and light program card for mobile use to change or adjust parameters of brushless control FG order number: 7905 fast and clearly. Display of parameters and data through two large LED segments.
Contents:
- 1 piece
Login
Similar products
Product information "Hobbywing OTA Bluetooth Programer"Thanks to the OTA Programming Module, Hobbywing ESCs can be programmed in a new modern and intuitive way. The ESC is wirelessly connected to a smartphone via the Bluetooth signal sent by the module. All parameters can then be selected and set as usual in the Hobbywing "HW Link" app.The OTA programming module is also smaller and lighter than a conventional programming box and therefore fits comfortably in any pocket. So perfect for on the go.FeaturesEasy to operateCompact designData Recording in real time (compatible ESC required)Firmware-Update within the "HW Link"-AppInclusive Reset-Button on the bottom sideSuitable for the following HobbyWing productsselected XERUN and EZRUN-ESCs for RC carsselected PLATINUM-ESCs for RC aircraftsselected SEAKING-ESCs for RC BoatsTechnical SpecificationsDimensions:30x25.5x8.5mmWeight:10.2gWorking Voltage:5-12.6VEffective Range:0-3mSupported Bluetooth-Version:>/= 4.0 Notice: You can download the "HW Link"-App by Hobbywing for Android-Devices in the Google Play Store as well as for IOS-Devices in the Apple Store.
Genuine FG spare/option part. Small and light program card for mobile use to change or adjust parameters of brushless control FG order number: 7909 fast and clearly. Supply 2S-6S Li-Po (7.4 22V)BEC 6V/3ADimensions: 55 x 48 x 38 mmWeight: 185gContents:1 piece
Genuine Leopard Hobby spare/option part.This multifunction program box is for programming Leopard Hobby brushless ESCs and DYNS2661 Dynamite FUZE 160A BL WP 1/5th ESC, 8s control. Its friendly LED interface makes ESC programming easy and quick. Besides, its compact, portable and very applicable for field use.SpecificationsSize: 88 x 58 x 14mm（LxWxHWeight: 65gInput Voltage: 4.8-6V(a separate battery is needed for powering this program box when ESC has no built-in/external BEC)Contents:1 piece
Genuine Spektrum spare/option part. Set, review, adjust and save the operating parameters of your Avian and Firma electronic speed controls using the Spektrum Smart ESC Programmer. When connected to a PC using the included USB cable, the programmer will update Smart ESC firmware and can adjust parameters through the Spektrum SmartLink app. You can also use it to check the balance of your LiPo battery cells. Product Features Review, adjust and save Spektrum Smart ESC parameters Connect (via USB) to a PC to update Smart ESC firmware and adjust parameters via Spektrum SmartLink PC app Check a LiPo battery's cell balance Contents:1 piece
Genuine Dynamite spare/option part. Unlock the potential of your Dynamite Brushless ESC with the Dynamite LED Program Card. You can quickly and easily set the programming parameters on a varity of Dynamite Fuse car and truck along with marine ESCs. The LED Program card comes with everything you'll need to connect to your ESC including a Mini-JST Adapter Cord and Servo Adapter Cord Key FeaturesProvides easy access to programming parametersCompatible with DYN4850, DYN4940, DYNS2416, DYNM3875, DYN4955, DYNS2641, DYNM3880, DYNS2660, KXSS0500 and KXSS0501 Brushless ESCsContents:1 piece
Customers also viewed
Genuine Leopard Hobby spare/option part.This multifunction program box is for programming Leopard Hobby brushless ESCs and DYNS2661 Dynamite FUZE 160A BL WP 1/5th ESC, 8s control. Its friendly LED interface makes ESC programming easy and quick. Besides, its compact, portable and very applicable for field use.SpecificationsSize: 88 x 58 x 14mm（LxWxHWeight: 65gInput Voltage: 4.8-6V(a separate battery is needed for powering this program box when ESC has no built-in/external BEC)Contents:1 piece
Genuine Dynamite spare/option part. Unlock the potential of your Dynamite Brushless ESC with the Dynamite LED Program Card. You can quickly and easily set the programming parameters on a varity of Dynamite Fuse car and truck along with marine ESCs. The LED Program card comes with everything you'll need to connect to your ESC including a Mini-JST Adapter Cord and Servo Adapter Cord Key FeaturesProvides easy access to programming parametersCompatible with DYN4850, DYN4940, DYNS2416, DYNM3875, DYN4955, DYNS2641, DYNM3880, DYNS2660, KXSS0500 and KXSS0501 Brushless ESCsContents:1 piece
Genuine UFRC spare/option part. Fits Ghost Rabbit GR1.Contents:6 pieces
Product information "Hobbywing OTA Bluetooth Programer"Thanks to the OTA Programming Module, Hobbywing ESCs can be programmed in a new modern and intuitive way. The ESC is wirelessly connected to a smartphone via the Bluetooth signal sent by the module. All parameters can then be selected and set as usual in the Hobbywing "HW Link" app.The OTA programming module is also smaller and lighter than a conventional programming box and therefore fits comfortably in any pocket. So perfect for on the go.FeaturesEasy to operateCompact designData Recording in real time (compatible ESC required)Firmware-Update within the "HW Link"-AppInclusive Reset-Button on the bottom sideSuitable for the following HobbyWing productsselected XERUN and EZRUN-ESCs for RC carsselected PLATINUM-ESCs for RC aircraftsselected SEAKING-ESCs for RC BoatsTechnical SpecificationsDimensions:30x25.5x8.5mmWeight:10.2gWorking Voltage:5-12.6VEffective Range:0-3mSupported Bluetooth-Version:>/= 4.0 Notice: You can download the "HW Link"-App by Hobbywing for Android-Devices in the Google Play Store as well as for IOS-Devices in the Apple Store.
Genuine FG spare/option part. For motors with and without sensor. Only high-quality components were used in the construction! The controller has many programmable parameters, low voltage protection and a temperature shutdown.Parameters can be programmed via the set button, a programming card or a programming box and firmware updates can be performed using the programming box with a PC.Technical data:Continuous current: 160APeak current burst: 1050ABattery: 3S - 8S LiPo or 9-24 cells NiMHBEC: 6V/7.2 V - 3A/6 ADimensions: 70x56x46.5 mmWeight: 240gContents:1 piece
The EzRun MAX6 G2 is a modern brushless controller with high-voltage support and an integrated Bluetooth module. Compared to its predecessor model, the second generation is considerably more powerful with up to 200A and, with 12 programmable parameters, also offers more scope for customisation to suit your personal driving style. Aggressive starts, high acceleration on straight stretches and jump control are just a fraction of what the controller has to offer. And thanks to the intelligent freewheel technology, the controller remains relaxed and cool even during these demanding manoeuvres.
Probably the most convincing feature of the MAX6 G2 controller is the integrated Bluetooth module. This eliminates the need for programming cards and the OTA module as additional accessories. All you need now is the HWLink2 app and the controller can be conveniently programmed and updated on your smartphone. It is even possible to record data for up to 10 minutes and provides an insight into the most important driving data such as speed, voltage and temperature. With a powerful integrated BEC, an anti-spark design and several protective devices, this speed controller offers advanced functions and a high level of safety. The EzRun MAX6 G2 is therefore the ideal choice for RC enthusiasts looking for maximum potential and the best reliability. With perfect compatibility with both Hobbywing's EzRun 4990 G2 and 5690 G2 motors, this power system offers an unbeatable team for optimum performance with modern features.
Features - Now with even more power than its predecessor. - Integrated Bluetooth module to programme the controller directly via the HWLink2 app on your smartphone. - Intelligent fan that only activates when the temperature reaches a certain value.
Water & dust resistant to IP67 standard for use in all weather conditions. - Built-in ultra-strong switching mode BEC to address a wide range of servos (high power / high voltage servo). - Turbo timing setting included. - Especially recommended with the matching motor (e.g. EZRUN 4990 G2 or 5690 G2). - Several protective functions: Battery undervoltage protection, controller and motor overheating protection, signal loss protection, current protection. - Built-in data logging function to display various running data of up to 10min in the HW LINK app - Supports firmware upgrade of the controller. - 12 adjustable parameters.Technical Data Type: 1/6 Brushless Sensored Current (continuous/short): 200A / 1200A Input voltage: 3-8S LiPo BEC: 6V/7.4V/8.4V @8A (switch mode) Motor types: Brushless motors (with/without sensor) Motor limits: - 6S Lipo: KV <= 2400
- 8S Lipo: KV <= 1700 4990/5690 motor
Fan: Yes, operated via the BEC Programming: HWLink2 app (via the integrated Bluetooth module) Waterproof: Yes Size: 70x56x45.5mm Weight: 245g Applications: 1/6, 1/7 on-road, truck, monster truck Scope of delivery: Ezrun MAX6 HV G2 ESC