7313/10 FG Tuning crankshaft +2 mm stroke complete G230/240/260/270/290

€132.50*

Available

Product number: fg_7313_10

EAN: 3410564539828

Product information "7313/10 FG Tuning crankshaft +2 mm stroke complete G230/240/260/270/290"

Genuine FG spare/option part.

This stroke-up crankshaft changes the stroke from 28mm (standard) to 30mm.

The crank-shaft fits the Zenoah engines G230, G240, G260, G270 and G290. No warranty can be provided for engines with modified crank-shaft.

Contents:

1 piece

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

No reviews found. Share your insights with others.

Similar products

7332 FG Silencer gasket for CY / Zenoah / Fuelie / PT

Genuine FG spare/option part.For all Zenoah / CY / Fuelie / PT engines.Applications:Click here!Actual product may be of different color. We have no bearing on this since we are not the manufacturer.Please note:It is recommended to use a gasket sealer with every gasket on an engine. This gives better sealing anda longer lasting gasket. We also recommend:y0804 HT-flange sealer 518 y0994 Marston sealery0807 MD-Sil RTV silicone sealerContents:2 pieces

€4.90*

ST-AN21D SPEED TEC 0,25 mm EWP207 Silencer gasket for CY / Zenoah AN - expansion sealing gasket

Genuine Speed-Tec spare/option part. For all Zenoah G230/240/260/270/290/320 / CY / Fuelie / PT / Losi / CarsonAN - expansion sealing gaskets are in use in the 2-stroke motor sports for years and are based on NBR-linked cellulose fibers. They are especially used for sealing hot oils, greases and fuels! The sealing material is compressed during assembly, and as soon as it comes into contact with fuel, it swells again. Thus it is i.e. possible to make up for irregularities in the sealed surfaces (i.e. cylinder / crankcase) and seal them properly! The material of the SPEED TEC AN - expansion sealing gaskets guarantees a very good dimensional accuracy and is often the solution for leaks on your engine! Technical data of the material in contact with fuel:- Rebound ASTM G > 30%; increase in thickness < 5%; weight gain < 55%;- Compressibility ASTM F36 G 22.5% +/- 2.5 27.5% +/- 7.5Contents:1 piece

€3.50*

7309/09 FG Piston ring for Zenoah G230/04

Genuine FG spare/option part.Width 0.8 mm.Hint for installation: The green dot on the ring goes towards the clutch side!Contents:1 piece

€15.30*

7309/08 FG Piston ring for G230RC

Genuine FG spare/option part.Spare part for Zenoah G230RC.Width 1.0 mmContents:1 piece

€10.40*

7323/08 FG Complete pull start unit for CY / Zenoah / Fuelie / Losi engines

fg_7323_08 Zenoah Label: Without label

Genuine FG spare/option part. Complete starter unitPull start unit for CY / Zenoah G230/240/260/270/290/320.Contents:1 piece

€39.90*

7312/01 FG Spacer washer needle bearing for Zenoah

Genuine FG spare/option part.Contents:2 pieces

€6.50*

7316 FG Clutch blocks for Zenoah

Genuine FG spare/option part. Zenoah bolts 7318 are required for installation.Content:2 pieces

€19.90*

7311 FG Gudgeon pin clips for Zenoah

Genuine FG spare/option part.Dimension:Outer diameter: 9,4 mmWire diameter 0,7 mmContents:2 pieces

€3.20*

7316/09, FG OEM clutch complete, set for Zenoah/CY/Fuelie/Losi engines

Complete clutch with spring, carrier and bolts. For Zenoah G230/240/260/270/290/320 und CY / Fuelie / Losi engines.

€32.30*

7313/01 FG Key for Crankshaft for CY / Zenoah / Fuelie

Genuine FG spare/option part. Contents:1 piece

€3.70*

7312 FG Needle bearing for CY / Zenoah

Genuine FG spare/option part.Dimensions:Inner diameter: 8 mmOuter diameter: 12 mmWidth: 9 mmContents:1 piece

€14.20*

7323/12 FG Starter rope for all CY / Zenoah / Fuelie

Genuine FG spare/option part.Dimensions:Length approx.: 78 cmDiameter: 3 mmContents:1 piece

€5.40*

Customers also viewed

y0469 Special stuffed stroker crankshaft for 30.5 cm³

Genuine HT spare/option part. Stuffed stroker crankshaft. Spare part for the 30.5 cc big bore kit y0466.Contents:1 piece

€89.90*

7313/08 FG Crankshaft complete for Zenoah

Genuine FG spare/option part.For Zenoah G230/240/260/270/290 enginesContents:1 piece

€99.90*

y0811 After-Run, performance enhancing preservation for all 1/5 and 1/6th scale models, 20 ml

Genuine HT spare/option part. After-Run is a performance enhancing preservation, which ensures that the engine starts properly, even after a long time (winter break) storage. Added to the fuel it keeps the fuel system clean.Among other After-Run conserves the diaphragm of the Walbro carburetor!For long term storage (i.e. during winter!) "vital" for the carburetor diaphragms!For 23 to 32 cm³ engines like Zenoah, Chung Yang, PT, Losi, HPI a.s.o.It binds water in the fuel, particularly important when the engine is not run regularly or after wet races. After-Run improves engine performance, ensures better combustion, removes debris and residues. Simply add the content of the bottle to 5 litres of fuel.Contents:1 piece / 20 ml

Content: 20 Milliliter (€345.00* / 1000 Milliliter)

€6.90* €8.90* (22.47% saved)

y0807 MD-Sil RTV silicone sealer

Genuine MD spare/option part. The red version with a temperature resistant up to 300°C. Directions for use:Clean the surfaces with a cleaner. Apply MD-Sil on one side and press the parts together. Touch-dry in 10 - 20 minutes. Curing speed 3 mm/24 hours. Contents:1 piece / 80 ml

Content: 80 Milliliter (€211.25* / 1000 Milliliter)

€16.90*

ST21102 SPEED TEC Ported and polished crankcase for 23/26 cc 2-bolt CY, Losi and HPI engines

Fits 23 cc and 26 cc 2-bolt Chung Yang; HPI-Fuelie and Losi 5ive-T engines.Comes as shown with ball bearings, crankshaft seals and screws.

€79.90*

This product is currently not available.

s23006, Crankshaft PT23/28, set

With crank key included.

€59.90*

5646/3 Mielke Mix linings "NEW" for Power Gearshift Converse II clutch

Neue Mielke Mix Beläge für die Gearshift 2 Kupplung (die Blaue).3 Stück2 x Beläge in Aluminium1 x Kupplungsbelag in Aluminium mit eingesetzem Carbonteil.Dieses Carbonteil ist notwenig um die Kupplungsglocke sauber von Aluminiumabrieb zu halten.

€54.90*