7257 FG Team decals Honda Accord - set

€22.80*

Available

Product number: fg_7257

EAN: 3410569695000

Product information "7257 FG Team decals Honda Accord - set"

Contains the advertising labels for original design.

Sheet dimensions:
470 x 350 mm
330 x 200 mm

The decal set contains no headlights, rear lights etc.
Please order separately.

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Similar products

7305/08 FG Crankcase gasket for CY / Zenoah

Genuine FG spare/option part.For Zenoah G230/240/260/270/290 enginesApplications:Click here!Actual product may be of different color. We have no bearing on this since we are not the manufacturer.Please note:It is recommended to use a gasket sealer with every gasket on an engine. This gives better sealing anda longer lasting gasket. We also recommend:y0804 HT-flange sealer 518 y0994 Marston sealery0807 MD-Sil RTV silicone sealerContents:1 piece

€4.30*

7304/02 FG Ball bearing for CY / Zenoah / Fuelie

Genuine FG spare/option part.Dimensions:12 x 28 x 8 mmContents:2 pieces

€21.90*

7306/09 FG Special Cylinder foot gasket CY / Zenoah

Genuine FG spare/option part.For Zenoah G230/G260Applications:Click here!Rugged and extremely wear-resistant cylinder gasket. Suitable for the Zenoah engines G230, G260 and the CY engines with the 2-bolt cylinder mounting.Thickness: 0.5 mm. Actual product may be of different color. We have no bearing on this since we are not the manufacturer.Please note:It is recommended to use a gasket sealer with every gasket on an engine. This gives better sealing anda longer lasting gasket. We also recommend:y0804 HT-flange sealer 518 y0994 Marston sealery0807 MD-Sil RTV silicone sealerContents:1 piece

€5.40*

7303/08 FG Seal ring for CY / Zenoah / Fuelie

Genuine FG spare/option part.Spare partvv for CY / Zenoah G230/260.One each 1x 12 x 28 x 7 mm and 12 x 22 x 7 mmContents:2 pieces

€17.50*

7308/09 FG Piston for Zenoah G230/240

Genuine FG spare/option part.Contents:1 piece

€33.90*

7287 cask-shaped spring silver 2,9mm

Genuine FG spare/option part. These cask-shaped shock springs are suitable for the shocks from the EVO 2020 and other shocks with an outer body diameter of 20 mm.Wire diameter. 2.9 mmContents:2 pieces

€22.50*

7257/01 FG Honda Arcor decal

€21.50*

7301/08 FG Crank case A+B for Zenoah G230/260

Genuine FG spare/option part. Content:2 pieces

€99.95*

7307/09 FG Cylinder for Zenoah

Genuine FG spare/option part.Contents:1 piece

€75.90*

7307/02 FG Cylinder for Zenoah ZG22 97- 1pce.

Spare part for Zenoah ZG22.

€123.00*

7263 FG Team decals for Opel V8 Opel-Service - set

Contains the advertising labels for original design.Sheet dimensions:490 x 420 mm325 x 130 mmThe decal set contains no headlights, rear lights etc.Please order separately.

€39.80*

7300/09 FG Zenoah engine G230RC

Genuine FG spare/option part. The FG Zenoah G230RC is a further development of the Zenoah G230RC. At present it is the most powerful 23 cm³ serial engine. A repeated reworking of parts such as piston, cylinder and crankcase as well as a modification of the carburetor resulted in a further increase of power.Contents:1 piece

€349.50*

Customers also viewed

7257/01 FG Honda Arcor decal

€21.50*

7072/01 FG Adjustable rear lower wishone for 1:5

Genuine FG spare/option part.Contents:1 piece

€19.90*

Details

5014 FG RC-plate for 1:5/Truck/Leopard

Genuine FG spare/option part. Plastic radio plate for installation of up to 4 servos. Fits all FG street models (except Formula 1) and Leopard models.You will need FG #6118/05 for installation of any steering servo other than Hitec 805BB.Contents:1 piece

€19.90*

7175 FG Team decals Peugeot 406

fg_7175 Elasto film: 7175/E On Elasto film, + 50%+ 17.08EUR

Genuine FG spare/option part. The set contains the advertising labels for original design.The decal set contains no headlights, rear lights etc.Please order separately under 7175/01.Dimensions:530 x 475 mm305 x 275 mm475 x 145 mmContents:1 pieceThis decal set is also available in the elasto version! Decal sets made from elasto film are substantially more durable and have a much more massive adhesive layer. Unfortunately, the elasto film has three times the price of the vinyl normally used for decal sets. Therefore the elasto decal sets have an approx. 30% higher price. And sorry, but the choice of elasto decal sets is still limited at the moment! Attention:Due to the special surface properties of TPE (elasto plastics), elasto decal sets are strongly recommended for TPE body shells. However, with the usual polycarbonate body shells the standard decals are sufficiently durable.

Variants from €37.95*

€51.23*

8170 FG Team decals BMW M3 GTR

Genuine FG spare/option part. Contains the advertising labels for original design. The decal set contains no headlights, rear lights etc.Dimensions:500 x 420 mmContents:1 piece

€30.60*

TT0900 Top Tuning electric starter 2.0 for most 1/5 and 1/6 cars

The new TT0900 electric starter is pre-assembled and fits a wide range of models including the Losi 5ive-T, 5ive Mini and DBXL, most FG models, HPI-Baja / Wild Attack series etc. The TT0900 electric starter can be started with the remote control (free channel required!). The new TT0900electric starter has much more power than the previous Electric starter thanks to the brushless motor and higher voltage. The popular Zenoah G320 is no longer a problem. It also no longer uses a one-way bearing, which clearly increases reliability. Also the installation space has been noticeably reduced by the motor and a planetary gearbox.The starter components to be fitted weigh about 666 grams plus the battery.For mounting the starter, the flywheel on the engine is replaced by the version with spring-loaded pawls included in the delivery. The tools required for this, piston stopper and flywheel puller, are also included in the delivery.For the 3rd channel the transmitter should have a switch with two positions (momentary switch preferred) or a controller. An additional channel is required for a remote engine killswitch. A killswitch is included in the scope of delivery, but a real fail-safe module such as TT0990 offers higher safety. A possibly already existing failsafe module can also be used.Due to the splitting of the functions engine start and engine stop on two channels, no more compatibility problems with different remote controls are to be expected, only the availability of free channels matters.A 3S LiPo battery is required as the power source.In the shops options menu, we offer a special battery with a more compact design (5,600 mAh/30C, 110 x 49 x 34 mm) which makes installation usually easier in many cars, as well as a battery with standard dimensions (3,900 mAh/60C, 135 x 45 x 25 mm). Of course, other 3S batteries can also be used at your own discretion, but the load capacity (capacity x C-rate) should be on a similar or higher level.Please note that we cannot ship batteries to countries outside the European Union!Since the starter unit can be mounted vertically or horizontally and the brushless starter motor is very small, almost all air filters and most tuned pipe systems can be used.Notes regarding necessary modifications known to us for mounting the starter depending on the vehicle: FG 4wd onroad Rear r/h plastic body mount, depending on position, slightly modified or relocated FG 2wd onroad horizontal engine No modifications Mecatech FW01 No modifications FG 4wd Buggy sportsline Depending on the body shell, minor trimming is required. FG 2wd Buggy current chassis Depending on the body shell, minor trimming is required. FG 2wd Marder (old chassis) Starter fits without modifications to the chassis plate. However, the body shell has to be cut out a bit more seriously in the area of the starter. A repositioning of the rear r/h body mount is recommended. FG Monster Cut the r/h side panel slightly and add a flat area to the aluminum tube which supports the panel on the engine Losi 5ive-B Depending on the tuned pipe, mount starter with motor on top or on the l/h side. Losi 5ive-B Mount the starter motor on the l/h side, space for the tuned pipe is very tight and must be tested in each individual case. No problems when using the stock muffler box. Losi DBXL Depending on the tuned pipe, mount starter with motor on top or on the l/h side. If the starter motor is to be mounted on the side, one screw of the motor roll cage must be replaced by a CSH screw. Carson C5 Only with Zenoah or CY engine, not with Smartech PT engine (different hole pattern on engine)! Carson C6 With the C6, depending on the body shell, trimming is required. HPI 5B/T Depending on the body shell, minor trimming is required. Carson Wild GP Attack Depending on the body shell, minor trimming is required. The accommodation of the engine killswitch, controller unit and wiring harness must be carried out at your own discretion. User Manual FG 4WD On-Road FG Monster FG 2WD On-Road horizontal engine FG 2WD/4WD Buggy current chassis Losi 5ive-T Losi DBXL FG 2WD Marder (old chassis)

€349.90*

Details

AT-5T007 ATOP Aluminum rear skid plate Losi 5ive-T and Mini

Genuine ATOP spare/option part.CNC-machined from 6061-T6 aluminum by ATOP.Protects chassis plate and transmission case over rough terrain. Also reinforces the chassis plates narrow section in front of the gear case. Thickness: 4 mm, weight: 85 grams.Contents:1 piece

€29.90*