5185/01 FG Vehicle decal set Mini Cooper

Genuine HT spare/option part. Dimensions Jägermeister Logo:1 x 170 mm diameter1 x 90 mm diameter4 x 50 mm diameterDimensions Jägermeister lettering:1 x 250 mm width, 4 x 210 mm width,1 x 130 mm width, 2 x 60 mm width, Dimensions Dezent lettering 4x 110 mm width Total dimensions: Width: 490 mm Height: 420 mmIn the shopping cart selection of this large Jägermeister team decal sheet,this is also available in a with an extra charge under item number y0683/01high-quality opaque screen print version, available on a special film.This decor set is especially for decorating on dark Body colors suitable.Contents:1 piece

Genuine HT spare/option part. rc-car-online lettering with correspondig logo. All decals are cutted with a plotter. Dimensions:Sheet with car logos: 450 x 160 mmSheet with rc-car-online letterings: 450 x 140 mmContents:1 piece

Genuine Zenoah decals set with a total of 32 decals in different colors and sizes.Decal sheet dimensions:Width: 298 mmHeight: 210 mmDecals dimensions:Size one: width: 175 mm, height: 47 mmSize two: width: 105 mm, height: 30 mmSize three: width: 55 mm, height: 15 mmSize four: width: 40 mm, height: 10 mmSize five: width: 30 mm, height: 8 mm

Genuine HT spare/option part. Universal decals suitable for all body shells. The decals are printed on clear film and have to be cut out by yourself.Available in the colors black or white.Size (Height x Width):Complete sheet: 285 mm x 390 mm3 x Number frame: 105 x 90 mm3 x Numbers from 1 to 0: 50 mm (different widths)This decal set is also available in the elasto version! Decal sets made from elasto film are substantially more durable and have a much more massive adhesive layer. Unfortunately, the elasto film has three times the price of the vinyl normally used for decal sets. Therefore the elasto decal sets have an approx. 30% higher price. And sorry, but the choice of elasto decal sets is still limited at the moment! Attention:Due to the special surface properties of TPE (elasto plastics), elasto decal sets are strongly recommended for TPE body shells. However, with the usual polycarbonate body shells the standard decals are sufficiently durable.Contents:1 piece

Sheet size 470 x 250 mm

Genuine HT spare/option part. Decal sheet with logos from several rc-car and supplies manufacturers. All decals are cutted with a plotter. List of manufacturers:rc-car-online.deSmartechLightscaleMecatechHPI-RacingRC-PaintRoadiesFGSpektrumClark´sLosiHorizon HobbySpeed-TecGRPBigscalerGPMPMTZenoahMultiplexLRPChung YangMotulHitecDimensions:220 mm x 330 mmContents:1 piece

Decal set fits y1589 Subaru Impreza Monte-Carlo 99 body shell.Contents:1 piece

Vehicle decoration for Ford Capri RS Zakspeed. See photos for scope of delivery, design and details.1 piece

Genuine HT spare/option part. Universal sponsor decals suitable for all body shells. The decals are printed on clear film and have to be cut out by yourself.All logos are 40 mm wide, their heights differ depending on the logo; four logos each per sheet.With logos from: Kenwood, Sparco, Shell V-Power, Sonax, Recaro, O-Z Racing, Hankook, ABT, Michelin, H&R, Eibach, Castrol, Akrapovic, Bosch, Bilstein.Size (Height x Width):Complete sheet: 310 mm x 450 mmThis decal set is also available in the elasto version! Decal sets made from elasto film are substantially more durable and have a much more massive adhesive layer. Unfortunately, the elasto film has three times the price of the vinyl normally used for decal sets. Therefore the elasto decal sets have an approx. 30% higher price. And sorry, but the choice of elasto decal sets is still limited at the moment! Attention:Due to the special surface properties of TPE (elasto plastics), elasto decal sets are strongly recommended for TPE body shells. However, with the usual polycarbonate body shells the standard decals are sufficiently durable.Contents:1 piece

Genuine FG spare/option part. The set contains the stickers of the headlights, the rear lights and the radiator grill.Not included are the advertising labels for the original design. Please order separately.Dimensions:305 x 140 mmContents:1 piece

Genuine FG spare/option part. The set contains the advertising labels for original design.The decal set contains no headlights, rear lights etc.Please order separately under 7175/01.Dimensions:530 x 475 mm305 x 275 mm475 x 145 mmContents:1 pieceThis decal set is also available in the elasto version! Decal sets made from elasto film are substantially more durable and have a much more massive adhesive layer. Unfortunately, the elasto film has three times the price of the vinyl normally used for decal sets. Therefore the elasto decal sets have an approx. 30% higher price. And sorry, but the choice of elasto decal sets is still limited at the moment! Attention:Due to the special surface properties of TPE (elasto plastics), elasto decal sets are strongly recommended for TPE body shells. However, with the usual polycarbonate body shells the standard decals are sufficiently durable.

Contains the advertising labels for original design.Sheet dimensions:470 x 350 mm330 x 200 mmThe decal set contains no headlights, rear lights etc.Please order separately.

The 2WD-465 Sportsline model is built on the short chassis with double a-arms suspension front and rear. The vehicle is equippedwith the 2-shocks front suspension as standard, which ensures optimum traction for both front wheels.On the GT2, the front axle has been widened to 384 mm. The rear axle is 395 mm wide.Technical description:The model has a 465 wheelbase. The models are built on a 4mm alloy chassis with double wishbones at front and rear axle. All borings of the alloy chassis are countersunk to prevent the screw heads from bearing out. The models are serial equipped with the 2-damper front axle which guarantees an optimal traction of both front wheels. At the front/rear axle you can adjust through track rods or adjusting screws with right-/left-handed thread the king pin angle, trailing effect and toe-in. Further equipment points are front disk brakes, differential gear, easy-running FG ball drive, alloy brake calliper with big brake disk, stabilizer bar front and rear, tuned pipe muffler, rear brace, 24T steel pinion, spark plug cap suppression cover, latest version (Evo) oil-pressure shock absorbers with volume control and external adjusting ring for the initial spring preload. All rotating parts as shafts, axles and clutch bells a.s.o. are supported by ball bearings. You can select the car with complete RTR-equipment from the options menu. RTR-equipment RTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed. Transmitter: Reflex Wheel Pro III 2,4 GHzReceiver: Mini BECHigh power servo for throttle and brakeLargescale servo for steeringTx-battery, rx-battery The models are equipped with a powerful 23ccm combustion engine. The engine needs a 2-stroke petrol oil mixture. One tank filling gives you about 45 minutes driving fun. The power is transmitted over the well-tried system: from the engine over the 2-block clutch over radial tooth wheels on to the rear axle which is equipped with the bevel differential gear with pluggable axles. RC-plate with receiver box.To complete the models all merchantable servos and radio control systems are suitable. The RTR version comes with complete factory installed rc-system, including Ni-Cads! The car comes with an unpainted body shell.The FG 5164 decor sheet is not included!Also available painted in the shop selection!Dimensions: Length: 840 mm Width: 395 mm Height: 250 mm Wheelbase: 465 mm HT-Edition? HT-Edition means: this version comes with a big set of spare / option parts included. Steel pinions - Non-standard sizesEach of two different ratios are supplied with.Modul: m=1,5Value: 62,60 EURAlloy engine mount bigCNC machined alloy engine mount, direkt replacement for the stock plastic part, heat and tweak resistant. They come with all necessary hardware included. Value: 64,95 EUR Alloy spur gear carrierUse for 39T - 44 teeth spur gears.Value: 39,90 EUR Ball bearing set, sealed, set of 14The seal rings on sealed ball bearings keep dirt and dust out of the bearings. They are therefore particularly suitable for use in dirty and dusty environments.Value: 59,90 EURTotal value: 227,35 EURTouring cars in action!Painting tips:

The Reflex Wheel Pro III is the perfect choice for sport-level car, truck and boat drivers. Everything you need to bash around your backyard or local track. Proven performance, reliability and range from the Spektrum brand make the Reflex Wheel Pro III great for someone looking to get involved in RC surface or a great grab-and-go transmitter for the expert. Key FeaturesPerfect for sport level cars and boatsErgonomic gripServo reversingProven reliability from the Spektrum brandReflex Wheel Pro III 3-channel receiver includedInterchangeable grips (Medium grip included. Other grip sizes sold separately in Optional Accessories)Travel adjustProduct SpecificationsNumber of Channels: 2Modulation: DSMRBand: 2.4GHzReceiver: Reflex Wheel Pro III Receiver Battery Type: AAThis set contains:Reflex Wheel Pro IIIy1570 Servo 54kg-cm/0,11 s/6 Volt till 8,4 volt y2009 Top Tuning Digital pro Servo 20 kgy0425 Y-harness, universal connectorLOSB 9642 Global AC 6V Charger 2000 mAh 6V Battery with universal connectorWhen used in a FG 2WD car, adaptor plate 6118/02 is required for steering servo installation.

Genuine FG spare/option part. Contains the stickers of the headlights, the rear lights and the radiator grill  and other advertising stickers as shown in the picture.Not included are the advertising labels for the original design.Please order separately under the order no. 5053 Team decals VW New Beetle.Dimensions:375 x 330 mmContents:1 piece

Genuine HT spare/option part. For all epoxy models, plastic and polycarbonate/lexan body repairs!Direction of use:Use a brush or other applicator. Apply enough Flexa Fix to the damaged area. Be careful not to apply too much in one go as it can be difficult to manipulate. If necessary apply two or three coats to build up the joint area. Use epoxy blanket of pieces of polycarbonate (Lexan) to re-enforce if necessary.You can also use the Flexa Fix to re-enforce the body corners (let the pure product leak into the corners) or to make flexible battery packs.Contents:1 piece / 100 ml

Suitable for all models with a 465 wheelbase. The body consists of the main part, front spoiler and 3-part rear spoiler.The set is delivered not painted.Required body mounts:Mount front: FG 5020/01 Front bumperRear body mount: FG 5152 Rear body mountSide body mount front: FG 7014 Body mountsSide body mount rear: FG 7014 Body mountsMeasures:Length: 850 mmWidth: front 380 mm / rear 400 mmHeigth: 230 mmWheelbase: 465 mmPainting tips:

Fans of rock crawling, large-scale models, and Jeep® vehicles alike will be thrilled with the extreme detail and high-performance functionality of the SCX6 Jeep® JLU Wrangler 4WD RTR. At 1/6 scale, it takes Axial® off-road adventuring to a new level. Key Features The first ever Axial® 1/6 scale chassis design based on the proven SCX10 III Metal gear transmission comes configured for two speeds with high and low gears Includes AR90 Standard axles with a Heavy-Duty Spool Durable three-link front and four-link rear suspension setup provides optimal handling High-traction, 7" tall BFGoodrich® KM3 tires mounted on Black Rhino Primm 3-piece beadlock wheels Funktionen The first ever Axial® 1/6 scale chassis design based on the proven SCX10 III Includes AR90 "Standard" axles with a heavy-duty spool Metal gear transmission comes configured for two speeds with high and low gears Durable three-link front and four-link rear suspension setup provides optimal handling Replica V8 engine cover adds to the realistic appearance Spektrum DX3 2.4GHz DSMR® radio provides superior range, response, and interference resistance and is compatible with Smart technology Spektrum Firma Crawler 120A ESC feeds telemetry data to the DX3 transmitter in real time Includes a powerful Spektrum S905 Large Scale Metal Gear steering servo (also accepts larger 1/5 scale servos with the included adapter) Detailed Jeep® JLU Wrangler body with LED headlights and taillights provides exceptional scale looks High-traction, 7" tall BFGoodrich® KM3 tires are mounted on Black Rhino Primm 3-piece beadlock wheels Battery trays adjust to fit a wide range of battery sizes 2-Year limited warranty (see product manual for details) Axial Takes Scaling To A New LevelAt 1/6 scale, the ready-to-run SCX6 Jeep® JLU Wrangler 4WD brings a whole new dimension to RC crawling and Axial® engineers have done it right. Whether you're a fan of full-size Jeep® vehicles, rock crawling, large-scale models, or all of the above, you'll be thrilled by the amount of realistic detail and high-performance functionality found here.The SCX6 Jeep® JLU Wrangler 4WD takes Axial® "scaling" to the next level. Based on the proven SCX10 III, the SCX6 chassis might be considered its big brother. It's engineered for extreme durability and performance with AR90 axles. For optimal handling, the chassis has a three-link Panhard front and four-link rear suspension setup. The transmission offers high and low gears out of the box, with a Spektrum S614 Metal-Gear Servo included and installed for the two-speed linkage.While the 1/6 scale size allows more room for impressive detail, the SCX6 Jeep® JLU Wrangler 4WD still fits conveniently into the trunk of your car and most rock gardens and hiking trails provide plenty of exciting challenges to overcome. As you navigate the trails, you'll admire how well the Jeep® JLU Wrangler body reproduces its full-size counterpart. Even the most demanding Jeep® enthusiasts will appreciate the accuracy of the details molded throughout. When the sun goes down, LED headlights and taillights add even more realism.Massive, 7" tall BFGoodrich® KM3 tires provide excellent grip and ground clearance for dirt, rocks, and all other off-road surfaces. They're mounted on licensed Black Rhino Primm injection-molded, 3-piece beadlock wheels so that the tires can be removed and replaced easily without gluing. Forest, desert, lake, mountains...the SCX6 Jeep® JLU Wrangler 4WD is ready to go anywhere.With the included Spektrum DX3 radio, you'll enjoy the superior range, response, and interference resistance of exclusive DSMR® technology. Together with the installed Firma Crawler 120A Smart Sensored-Brushless ESC, it also comes ready to deliver the telemetry advantages of exclusive Spektrum Smart technology. Outfit the DX3 with the optional BT2000 Bluetooth module, download the free Spektrum Dashboard app to your smart device, and you're ready to use more Smart real-time telemetry without needing on-board sensors or modules.With its 1/6 scale size, popular Jeep® styling, and unstoppable Axial® engineering, the SCX6 Jeep® JLU Wrangler 4WD takes RC scaling to an exciting new level. Just add your choice of suitable battery and take on the rocks! SCX6 CHASSISAufbauend auf dem bewährten SCX10 III-Layout, hebt das SCX6 in 1:6 die Langlebigkeit, Funktionalität und Leistung durch Features wie dem Stahl-Chassis, Allradantrieb, Based on the proven SCX10 III layout, the 1/6 scale SCX6 takes durability, functionality, and performance to the next level with features that include a steel chassis, 4-wheel drivetrain, multi-link suspension, AR90 axles, oil-filled shocks, and more. TWO-SPEED METAL GEAR TRANSMISSIONOut of the box, the Axial® SCX6 Jeep® JLU Wrangler 4WD RTR is configured for two speeds with high and low gears. A Spektrum S614 Metal-Gear Servo is included for the two-speed linkage. 3-LINK FRONT/4-LINK REAR SUSPENSIONFor optimal handling, the SCX6 suspension features a durable three-link front and four-link rear setup. JEEP® JLU WRANGLER SCALE BODYThe Jeep® JLU Wrangler body mirrors its full-size counterpart, with many molded scale details throughout the interior and exterior that even the most demanding Jeep® enthusiasts will admire. LED headlights and taillights add to the realism after dark. SCALE ENGINE DETAILA replica V8 engine covers and protects the included Spektrum Firma Smart ESC while adding to the model's realistic appearance. SPEKTRUM DX3 2.4GHz DSMR® TRANSMITTERThe included Spektrum DX3 radio features exclusive DSMR® technology for superior range, response, and interference resistance. It's also fully compatible with the Smart telemetry potential provided by the vehicle's installed Spektrum Firma 120A Smart ESC. SPEKTRUM FIRMA CRAWLER 120A SENSORED BRUSHLESS SMART ESCThe factory-installed, waterproof Firma Crawler 120A Smart ESC delivers power and intelligence all-in-one no additional vehicle modules or links required. This brushless ESC gives your SCX6 Jeep® JLU Wrangler 4WD the ultimate drive while feeding important telemetry data straight to your DX3 transmitter in real time. SPEKTRUM S905 STEERING SERVOIncluded and installed, the waterproof Spektrum S905 Large-Scale Metal-Gear Servo produces impressive torque (537.72 oz-in at 6V, 555.50 oz-in at 7V) for responsive, dependable steering control. The chassis will also accept larger 1/5 scale servos, if desired, with the included adapter. BFGOODRICH® KM3 TIRESMassive, 7" tall BFGoodrich® KM3 tires provide excellent grip and ground clearance for dirt, rocks, and all other off-road trails. They're mounted to licensed Black Rhino Primm injection-molded, 3-piece beadlock wheels so that tires can be removed and replaced easily without gluing. MULTIPLE BATTERY MOUNTING LOCATIONSBattery trays are included on both the right and left sides of the chassis. You can install a single battery or add a second on the opposite side (using a parallel Y-harness, y0425/03) to extend run time. For the operation of the model still required are driving batteries and possibly a charger. Available in the selection in our online store.

Genuine Mecatech spare/option part for the FW01.Content:2 pieces