7152/02 FG Body mount front - 2pcs.

€8.70*

Prices incl. VAT plus shipping costs

Available

Product number: fg_7152_02

EAN: 3410564515204

Product information "7152/02 FG Body mount front - 2pcs."

Total length: 60mm
Length until body support: approx. 50mm

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Alternatives

6013 FG Body clips

Genuine FG spare/option part. Dimensions:Length: 33 mmWire diameter 1.5 mmContents:10 pieces

€5.30*

Customers also bought

GWH55-M3 GRP Formula 1 Revo front - M3 hard

Formular 1 tire chart from the current series divided into 3 categories 1) Parking lot / hobbyThe durability of the tire is the main focus here.2) Race track / hobbyHere you will find the tire that offers a compromise of durability and performance.3) Race track / competitionHere the racer will find the tires for best lap times on a race track and to win races.Note:The harder a tire compound - the longer it lasts, but the more moderate the performance.The softer a tire compound - the better the performance, but the lower the durability. Hint!As a rule, the same tires can be used for front and rear.If the vehicle tends to oversteer, this can be avoided by using a harder front tire!In wet conditions you should use a rain tire which offers maximum grip under these circumstances.With the use of Magic Rain, a tire traction compound, the grip can be further improved.Check your tires after driving! It can happen that a tire starts to detach from the rim, in this case you should glue this spot immediately with our tire repair kit (y0067), otherwise the tire could detach completely from the rim.So find out which tire is the best for you!Genuine GRP spare/option part. This pair of Tyres have the following use indications:HIGH GRIP situation for very clean trackHIGH GRIP situation for big asphaltHIGH GRIP situation for high temperaturesThis pair of Tyres have the following technical features:REVO Grooved profile for the maximum traction and the maximum lateral gripGrooved profile studied to maintain the tyre surface alway clean from rubber murbleM1 ExtraSoft compound exclusively developped for model tyresInside belt flexible but very strong, vulcanized directly together with tyre compoundInsert foam with special material for high temperatures, for maximum stability and high drive precisionSpoked wheel moulded with special material for high temperatures for maximum grip and stabilitySpecial gluing system 100% guaranteedThe main sizes for this tyre are:WHEEL fixing with square: 18 mmTYRE outside diameter: 137 mmWHEEL inside diameter: 100 mmTYRE total width: 64 mm Contents:2 pieces

€53.90*

10455 FG Polyamide front spoiler for F1

Genuine FG spare/option part.Solid front spoiler produced in impact resistant polyamide for the FG Formula 1 models. The complete front spoiler and side parts are manufactured in one piece. The ground colour is black and can be painted over restrictively. This front spoiler is specially suited for the use at competitions. Standard equipment of F1 Competition.Contents:1 piece

€37.00*

GWH66-XM2 GRP Formula 1 Revo rear - M2 medium

€64.90*

6725/20 FG Socket head cap screws M4x20 mm, 10 pieces

Genuine FG spare/option part.Part is delivered in silver or black color from vendor!Content:10 pieces

€3.40*

6013 FG Body clips

Genuine FG spare/option part. Dimensions:Length: 33 mmWire diameter 1.5 mmContents:10 pieces

€5.30*

Configure now

8418 FG Foam front bumper 1:5 - set

Item N° 8418 Foam front bumper 1:5 - setThe foam of this bumper set can be easily removed upwards through dismounting the body clips. Suitable for all 1:5 models. The foam can be adapted to all front bodies through cutting.Length: 110 mmWidth: 410 mmHeight: 55 mm

€47.50*

Similar products

7154 FG Body mount adjustable, 1 pce.

Adjustable body mount with heigt-adjustable body support.Measures:Length 110 mmDiameter 8 mm10 mm at the baseFor all cars and body shells.

€10.90*

7155 FG Body mount short adjustable

Genuine FG spare/option part. Adjustable body mount with heigt-adjustable body support.Dimensions:Length: 55 mmDiameter: 8 mmThe Base: 10 mmFor all cars and body shells.Contents:1 piece

€10.90*

7152/01 FG Extended rear mount

Genuine FG spare/option part. Fits all touring cars and Porsche 530.( Not for Mini Cooper und Porsche 465/510.)Contents:1 piece

€19.90*

7100 FG Adjusting clip for 16 mm axle, 16 pcs.

These adjusting clips allow a faster adjustment of the wishbones. Suitable for front and rear suspension. The set contains 16 adjusting clips in 2 and 6mm size for 6 mm axles.

€9.90*

7103/08 FG Distance bush for front upright

Genuine FG spare/option part.The installation of these spacer bushings between the ball bearings in the uprights allows you to tighten the wheel nut strongly. Suitable for all FG plastic and alloy uprights.Dimensions:Outer diameter: 11 mmWidth: 7 mmInner diameter 8,22 mmContents:2 pieces

€4.30*

Details

7093 FG Silicone o-ring - 12pcs.

Inner diameter 4 mmThickness 2 mm

€6.90*

7154/01 FG Body mount adjustable 80mm

Genuine FG spare/option part.Adjustable body mount with heigt-adjustable body support.Fits RC-models and bodies.Contents:1 set

€10.90*

7106 FG ATS rim silver 65mm - 2pcs.

Suitable for all FG 1:5 models and other makes.Rim with 18 mm square driveRim width: 65mmRim diamter: 95mmColour: Silver

€20.70*

7143 FG/Carson/Smartech Tank mounting for Zenoah tank - 2pcs.

Suitable for .

€23.90*

7099 FG Distance disk - 8pcs.

Spacer bushings for front axle caster adjustment.Outer diameter 11 mmInner diameter 6.3 mmWidth 6 mm

€3.90*

7102 FG Front wishbone pin - 2pcs.

6 x 87 mm

€10.50*

Details

7153 FG Extended rear body mount distance - 3pcs.

Distance rod for .Diameter 9.5 mmLength 75 mm

€13.90*

Customers also viewed

7155 FG Body mount short adjustable

Genuine FG spare/option part. Adjustable body mount with heigt-adjustable body support.Dimensions:Length: 55 mmDiameter: 8 mmThe Base: 10 mmFor all cars and body shells.Contents:1 piece

€10.90*

8466 FG Front axle 65 mm

Genuine FG spare/option part. Dimensions:Length: 65 mmThread length: approx. 12 mmLength from thread to clip: approx. 47 mmSpace between clips: approx. 4 mmDiameter: 8 mmContents:1 piece

€13.90*

6013 FG Body clips

Genuine FG spare/option part. Dimensions:Length: 33 mmWire diameter 1.5 mmContents:10 pieces

€5.30*

Configure now

66299 FG Aluminium volume compensator

Genuine FG spare/option part.Simple but very effective volume compensator, 100% sealing. Suitable for all FG aluminium shock absorbers 16mm and 20mm. Substitute for volume compensator 7088.Contents:2 pieces

€19.90*

7152/03 FG Body mount front 54mm, 2 pcs.

Genuine FG spare/option part.MeasuresTotal length: 54mmLength until body support: approx. 40mm

€8.70*

y6107/02 Wheel squares 18 mm HART-COAT, 17 mm wide

Genuine HT spare/option part.Wheel squares made of high-strength aluminum, hardened, with two M6 mounting threads Suitable for most 1/6 and 1/5 rc-cars. Through the use of two 6 mm screws a significantly higher retention force is achieved. Yet it is still recommended to use medium strength thread lock (link y0114)! The hard anodizing (HART-COAT) guarantees much lower wear of the squares! Especially recommended when using wheel mounted brake discs! Four 3x16 dowel pins per square are included which prevent the squares from spinning in the rim. Press fitting them into the wheel squares is optional. The 12, 14 and 17 mm wide squares feature a groove for inserting a C-clip (link 6106/05), which acts as a guide for the brake disk. The narrow 9.5 mm wide squares dont need a clip; the close sitting rim will guide the disk. Measures18 mm square (wheel drive!)17 mm wide, 8.0 mm diameter axle boretwo M6 mounting threads The set includes 2 pieces of 17 mm wide wheel squares and 4 pieces each of M6 grub screws and 3x16 dowel pins.Contents:2 pieces

€18.95*

G011 Carson Body shell Wild GP Attack for HPI Baja 5B too painted

Genuine Carson spare/option part. Contents:1 set

€89.90*