7103/08 FG Distance bush for front upright

€3.90*

Available

Product number: fg_7103_08

EAN: 3410564515068

Product information "7103/08 FG Distance bush for front upright"

Genuine FG spare/option part.

The installation of these spacer bushings between the ball bearings in the uprights allows you to tighten the wheel nut strongly. Suitable for all FG plastic and alloy uprights.

Dimensions:

Outer diameter: 11 mm
Width: 7 mm
Inner diameter 8,22 mm

Contents:

2 pieces

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

No reviews found. Share your insights with others.

Customers also bought

8466 FG Front axle 65 mm

Genuine FG spare/option part. Dimensions:Length: 65 mmThread length: approx. 12 mmLength from thread to clip: approx. 47 mmSpace between clips: approx. 4 mmDiameter: 8 mmContents:1 piece

€13.50*

6077/08 FG Spacer bushing for rear upright

Genuine FG spare/option part. Only suitable with standard size ball bearings.Dimensions:Length: 10 mmOuter diameter: 11 mmInner diameter: 8 mmContents:2 pieces

€4.50*

HT Car Bag for all models

car_bag_alle_fga Version: y0550 HT Car Bag for 1/5 scale cars

y0550 HT Car Bag for 1/5 scale cars (Fits FG, HPI, Mecatech FW01, Smartech/Carson a.s.o.)Fits for all 1/5 models for example: FG-: HPI-; Mecatech FW01-; Carson-; Smartech-; Conrads-; Harm-; RS5-; Lauterbacher a.s.oMade from extremely durable fabric, easily washable; with wrap-around shoulder belts and zipper closure.No dirt in the car boot!Dimensions:Length: 95 cmWidth: 50 cmHeight: 30 cmy0551 HT Car Bag for 1/6 scale cars (Fits FG, Smartech/Carson a.s.o.)Fits for all 1/6 models for example: FG Offroad-; Monster/Stadium-; Racetruck-; Carson-; Smartech-; Reely Carbon Fighter; Losi Super Rock Rey, Super Baja Rey, Axial Jeep and any more models. Made from extremely durable fabric, easily washable; with wrap-around shoulder belts and zipper closure. No dirt in the car boot! Dimensions: Length: 70 cm Width: 50 cm Height: 40 cm y0558 HT Car Bag XXL for LOSI 5ive-T, Mini 5ive WRC and Desert Buggy XL and many moreThe XXL version is especially made for the Losi 5ive-T, Mini 5ive WRC, Desert Buggy XL; Arrma Outcast/Kraton; Axial Honcho, Traxxas X-Max/XRT; UFRC GR1/Big Bully. Of course, other 1/5 and 1/6 large scale cars will fit into this bag as well; however, in this case the XXL bag gives you plenty of room for additional accessories. Made from extremely durable fabric, easily washable; with wrap-around shoulder belts and zipper closure. No dirt in the car boot! Dimensions: Length: 100 cm Width: 57 cm Height: 39 cm

€39.90*

4403/06 FG Front alloy uprights 99

Genuine FG spare/option part. One piece replacement alloy upright for 4403 and 4403/01. Suitable left or right. Contents:1 piece

€57.10*

6107 FG Wheel square 9,5mm/M6

Genuine FG spare/option part. Square wheel driver in high-strength alloy material with M6 fixing thread. Essentially higher retention force. Suitable for all models.Dimensions:Square: 9,5 mm Width: 17 mmBore: 8 mmContent:1 pieces:

€15.90*

10110 FG Rear rim for F1 silver - 2pcs.

Detailed Formula 1 BBS-race rim in silver.Width: 80mmRim with 18 mm square drive

€19.90*

Similar products

7154 FG Body mount adjustable, 1 pce.

Adjustable body mount with heigt-adjustable body support.Measures:Length 110 mmDiameter 8 mm10 mm at the baseFor all cars and body shells.

€9.95*

7152/01 FG Extended rear mount

Genuine FG spare/option part. Fits all touring cars and Porsche 530.( Not for Mini Cooper und Porsche 465/510.)Contents:1 piece

€19.90*

7093 FG Silicone o-ring - 12pcs.

Inner diameter 4 mmThickness 2 mm

€6.90*

7152/02 FG Body mount front - 2pcs.

Total length: 60mmLength until body support: approx. 50mm

€8.50*

This product is currently not available.

7143 FG/Carson/Smartech Tank mounting for Zenoah tank - 2pcs.

Suitable for .

€23.90*

7106 FG ATS rim silver 65mm - 2pcs.

Suitable for all FG 1:5 models and other makes.Rim with 18 mm square driveRim width: 65mmRim diamter: 95mmColour: Silver

€20.70*

7154/01 FG Body mount adjustable 80mm

Genuine FG spare/option part.Adjustable body mount with heigt-adjustable body support.Fits RC-models and bodies.Contents:1 set

€9.95*

7137/01 FG Bolt for cable holder rear brake - 1pce.

Spare part for , , , , and .

€2.80*

7155/01 FG Support for body mount - 6pcs.

Supports for the adjustable body mounts long 7154 and short 7155.30 x 20 mm, slot width 9.2 mm

€9.50*

7153 FG Extended rear body mount distance - 3pcs.

Distance rod for .Diameter 9.5 mmLength 75 mm

€13.90*

7100 FG Adjusting clip for 16 mm axle, 16 pcs.

These adjusting clips allow a faster adjustment of the wishbones. Suitable for front and rear suspension. The set contains 16 adjusting clips in 2 and 6mm size for 6 mm axles.

€9.50*

7102 FG Front wishbone pin - 2pcs.

6 x 87 mm

€9.90*

Customers also viewed

7110 Samba Installation kit for 50 mm pipes

Genuine Samba spare/option part. Fits Samba F1 Titanium RS5, Samba F1 Titanium FG, Samba 6 Titan, Samba 7, No. FG #7406 FG Steel Side Power and many other tuned pipes with a diameter of 50 mm. Please check first whether the installed pipe mount has the right height in the car so that the alignment of the tuned pipe to engine is still appropriate.Contents:1 set

€29.90*

y1595 SpeedTec Teflon Crankcase gasket 0,5mm

Genuine SpeedTec spare/option part. For Zenoah G230/240/260/270/290. Advantages Extremely temperature resistant, up to 300°C Seals 100%, even without stickin Seal can be used several times No more slipping of cylinders or isolators! Contents:1 piece

€5.40*

y1129 Mecatech hydraulic brake Expert for FG, Carson and many more, incl. brake bleeding set

Genuine Mecatech spare/option part. Full-metal hydraulic brake (like the former hydraulic FG brake).The set consists of two complete brake calipers for right and left, and 2 brake units, hydraulic oil and all, necessary for installation, accessories (see also our pictures)One version fits front and rearFits onroad / offroad / monster and stadium cars from FG and othersNo need for alloy uprights!Fits Formular 1 models, Competition, Sportsline and E (in connection with alloy front uprights y0932Dimensions master brake cylinder:Height: 75 mmWidth: 48 mmDepth: 13 mmContents:1 set

From €249.90* €269.90* (7.41% saved)

Details

8466/01 Stainless steel wheel shafts for FG 2WD, 62.5 mm

The wheel shaft is made from stainless steel and precision ground. This insures a perfect fit and prevents corrosion.A special nut with a serrated locking flange will keep the wheel in place. The flanged button head screw replaces the usual E-clipDirect replacement for FG 8466.Contents:2x Wheel shafts2x Nuts2x Screws

€12.90*

10032 FG Front upright - 2pcs.

€35.90*

2012-199 Mecatech Front upright ball joint Spacer standard

Genuine Mecatech spare/option part for the FW01.Content:4 pieces

€15.50*

y6718/12 Countersunk screw with cross recess M4x12 mm, 10 pieces

Genuine rc-car-online spare/option part.Part is delivered in silver or black color from vendor!Content:10 pieces

€2.24*