EXTRA 20% off Outlet*. Use Code: EXTRA20 at checkout!!
+49 2151 820200 Mon-Fri 9 am - 6 pm, Sa 9 am - 1 pm
Go to homepage
Quick shipping until 14 o'clock
PartScout
€0.00*
Quick shipping until 14 o'clock

66211 FG Gear cover 4WD

Skip image gallery

€6.90*

Prices incl. VAT plus shipping costs

Available

Product number: fg_66211
EAN: 3410564530283

Product information "66211 FG Gear cover 4WD"

Genuine FG spare/option part.

Contents:
  • 1 piece

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Customers also bought

66210 FG Rear axle cover 4WD
66210 FG Rear axle cover 4WD
Genuine FG spare/option part. Contents:1 piece

€10.95*
66238/01, FG Tank mount, lower section 4WD, 1 pce.
66238/01, FG Tank mount, lower section 4WD, 1 pce.

€13.80*
66238/02, FG Tank mount upper section 4WD, 1 pce.
66238/02, FG Tank mount upper section 4WD, 1 pce.
Item N° 66238/02 Upper tank mount 4WD, 1pce.Fuel tank buttom part for:

€7.70*
66217 FG Steel pinion 14T narrow, 1pce.
66217 FG Steel pinion 14T narrow, 1pce.
Item N° 66217 Steel pinion 14T narrow, 1pce.Layshaft pinion for FG 4WD cars, 10 mm bore diameter, tooth width 9.25 mm, total width 15.6 mm, outer diameter 25.7 mm.Module: m=1,5Profile regraded, this means that the number of teeth is changed while the diameter remained constant. The part of the involute curve that defines the tooth profile is changed. Positively regraded (lower number of teeth) pinions are stronger and run smoother, the reduced strength of negatively regraded pinions doesn't really matter.

€29.95*
GPM Air filter cover, no. BJAFCO, 1 pce.
GPM Air filter cover, no. BJAFCO, 1 pce.
GPM air filter cover which fits easily over your existing air filter. A rubber band at the bottom holds the cover in place. Maintenance of the main filter will be significantly reduced, especially in very dusty environments. Fits all common filters, foam or fabric (K&N) style.

€13.30*
6107/02 FG wheel square 17 mm/M6
6107/02 FG wheel square 17 mm/M6
Genuine FG spare/option part. Square wheel driver in high-strength alloy material with M6 fixing thread. Essentially higher retention force. Suitable for all models.Dimensions:Square: 18 mm Width: 17 mmBore: 8 mmContents:2 pieces

€16.90*

Similar products

66245 FG Steel ball 7 mm
66245 FG Steel ball 7 mm
Genuine FG spare/option part. Bore 3 mm.Contents:4 pieces

€5.30*
66237/01 FG Gilmer belt 15mm, 530/535 long, 1 pce.
66237/01 FG Gilmer belt 15mm, 530/535 long, 1 pce.
Item N° 66237/01 Gilmer belt 15mm, for Leopard 4WD 530, Offroad 4WD 535 and Sportline TW 4WD 535, 1 pce.

€54.90*
66207, FG Plastic cog belt pulley, rear 42T. 4WD
66207, FG Plastic cog belt pulley, rear 42T. 4WD
Genuine FG spare/option part.Contents:1 piece

€23.90*
Details
66244/01 FG Ball-and-socket joint 7mm f.M4, 30mm for Leopard 2WD/4WD, 8pcs.
66244/01 FG Ball-and-socket joint 7mm f.M4, 30mm for Leopard 2WD/4WD, 8pcs.
Item N° 66244/01 Ball-and-socket joint 7mm f.M4, 30mm for Leopard 2WD/4WD, 8pcs.Spare part for the Leopard 2010 2WD/4WD version

€5.90*
66217 FG Steel pinion 14T narrow, 1pce.
66217 FG Steel pinion 14T narrow, 1pce.
Item N° 66217 Steel pinion 14T narrow, 1pce.Layshaft pinion for FG 4WD cars, 10 mm bore diameter, tooth width 9.25 mm, total width 15.6 mm, outer diameter 25.7 mm.Module: m=1,5Profile regraded, this means that the number of teeth is changed while the diameter remained constant. The part of the involute curve that defines the tooth profile is changed. Positively regraded (lower number of teeth) pinions are stronger and run smoother, the reduced strength of negatively regraded pinions doesn't really matter.

€29.95*
66254, FG Axle shaft 6x50mm 4WD, 1 pce.
66254, FG Axle shaft 6x50mm 4WD, 1 pce.

€4.30*
66217/01 FG Steel pinion 15T narrow, 1pce.
66217/01 FG Steel pinion 15T narrow, 1pce.
Item N° 66217/01 Steel pinion 15T narrow, 1pce.Layshaft pinion for FG 4WD cars, 10 mm bore diameter.Module: m=1,5

€29.95*
66267 FG Turnbuckle M10/M8x66mm, 2WD/4WD, 2 pcs.
66267 FG Turnbuckle M10/M8x66mm, 2WD/4WD, 2 pcs.
M8 r/h thread / M10 l/h threadFor older 2WD models that are not based on the 4WD models, please refer to Sportsline 2008. or if an RC plate is no longer fitted, check Sportsline 13 in Parts Scout.There you will find the right spare parts for your vehicle.

€19.50*
66266, FG Alloy a-arm, front upper 4WD, 1 pce.
66266, FG Alloy a-arm, front upper 4WD, 1 pce.
Alternative: y2002 Alloy a-arm, front upper FG 4WD - Fits FG Leopard 4WD und Sportsline onroad 4WD with 510mm wheelbase.Does not fit FG Leopard 2WD und Sportsline onroad 4WD with 530mm wheelbase.

€39.95*
66223, FG Plastic bearing carrier 4WD
66223, FG Plastic bearing carrier 4WD
Genuine FG spare/option part.Contents:2 pieces

€5.50*
66250/01, FG Bracket f. stabilizer bar front 2WD/4WD, 2 pcs.
66250/01, FG Bracket f. stabilizer bar front 2WD/4WD, 2 pcs.
For older 2WD models that are not based on the 4WD models, please refer to Sportsline 2008. or if an RC plate is no longer fitted, check Sportsline 13 in Parts Scout.There you will find the right spare parts for your vehicle.

€3.50*
66210 FG Rear axle cover 4WD
66210 FG Rear axle cover 4WD
Genuine FG spare/option part. Contents:1 piece

€10.95*

Customers also viewed

T2070-15110 Genuine Zenoah exhaust muffler
T2070-15110 Genuine Zenoah exhaust muffler
Genuine Zenoah spare/option part. Genuine Zenoah steel muffler for G230 / G240 / G260 / G270 / G290 / G320 engines. Fits CY23 / CY26 / CY27 / CY29 / GP290 engines and various similar engines with a mounting hole spacing of 34 mm.Contents:1 piece

€7.90*
2012-23 Mecatech Dowel M4x4
2012-23 Mecatech Dowel M4x4
Genuine Mecatech spare/option part for the FW01.Content:1 Set

€3.80*
FG TR4 Truggy 4WD HT-Edition
FG TR4 Truggy 4WD HT-Edition
Ready for an extra portion driving fun? Then try the TR4 made by FG! Agressive appearance combined with the Leopard 4 chassis results in an optimal handling and stunning top speed with lots of driving fun wich will thrill you. Equipped with a 26 cm³ two-stroke gasoline engine with installed pull-start system. The TR4 is an uncomplicated complete package with well-tired racing technology.You can select the car with complete RTR-equipment from the options menu. RTR-equipment RTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed. Transmitter 2,4 GHzReceiverHigh power servo for throttle and brakeLargescale servo for steeringTx-battery, rx-battery Technical information:Strong 26 cm³ gasoline engineMaintenance friendly chassisTwo differential gearsHardened driving partsCompletely ball-bearedLarge-volume aluminium dampersAggressive rim designGrip tires with 185 mm diameter and 95 mm widthReady to use Off-Road filterSimple handlingLow weightPure driving funHT-Edition? HT-Edition means: this version comes with a big set of spare / option parts included. Steel pinions - Non-standard sizesEach of two different ratios are supplied with.Modul: m=1,5Value: 62,60 EURAlloy engine mount smallCNC machined alloy engine mounts, direkt replacement for the stock plastic parts, heat and tweak resistant.Value: 54,90 EURDriveshaft bootsProtect ball drive as well as cardan drive against dirt. 4 pairs / 8 piecesValue: 42,90 EURAlloy spur gear carrierUse for 46T - 48 teeth spur gears.Value: 39,90 EURTotal value: 200,30 EURDimensions: Length: 760 mm Width: 520 mm Height: 320 mm Wheelbase: 534 mm

€1,279.95*
Configure now
7197 FG Damper spring progressive 2,3x68mm yellow, 2 pce.
7197 FG Damper spring progressive 2,3x68mm yellow, 2 pce.
Item N° 7197 Damper spring progressive 2,3x68mm yellow, 2 pce.Suitable for all FG shock absorbers and also for other makes with an outside diameter of 16mm.Measures:Length: 68 mmOutside diameter: 21 mmWire diameter: 2,3 mm

€18.90*
6497 FG alloy front axle for 2WD Monster-Truck models for double shocks setup - set
6497 FG alloy front axle for 2WD Monster-Truck models for double shocks setup - set
Genuine FG spare/option part.Solid alloy front axle for all FG 2WD Monster-Stadium models for twin shock absorbers.Without Shocks and uprights.Contents:1 set

€349.95*
68215, FG Engine mount large 4WD, plastic, 1 pce.
68215, FG Engine mount large 4WD, plastic, 1 pce.

€17.90*
68501 FG 4WD conversion kit for 2WD Marder
68501 FG 4WD conversion kit for 2WD Marder
Genuine FG spare/option part. Fits FG 2WD Marder.Offer your Marder a new life - it will be out of all recognition! Aggressive in the curves, dead on the line - just everything which guarantees pure driving fun. The well-tried 4WD by FG is now available as conversion kit for your 2WD Marder. You will not realize from the outside that the model is equipped with a fourwheel drive. But you and your rc-car friends will notice it considerably as soon as you start your model and speed up properly.The conversion kit includes all parts necessary to convert your 2WD Marder to a 4WD Buggy. A mounting instruction is enclosed.Please note: the radio plate is designed to accept a 805-sized servo (case length 65 mm). For installation of a Rhino (case length 58 mm) or a similar sized servo you need to order radioplate 68241 separately.Contents:1 set

€424.95*
This website uses cookies to ensure the best experience possible. More information.... By clicking on "[Agree / Accept all / etc.]" you also give your consent to the disclosure of your behavior in our store to our partner, shopware AG (Ebbinghoff 10, 48624 Schöppingen, Germany), which cannot assign this data to you personally, but may process it for its own purposes (e.g. product improvements, market behavior analyses).
Upload in progress, please be patient ...
Shopware-Plugin Development Shopware-Agency