Skip to main content Skip to search Skip to main navigation
EXTRA 20% off Outlet*. Use Code: EXTRA20 at checkout!!
+49 2151 820200 Mon-Fri 9 am - 6 pm, Sa 9 am - 1 pm

6419/08 Slick tire rear S1 80mm for 1:6 models glued - 2pcs.

Product information "6419/08 Slick tire rear S1 80mm for 1:6 models glued - 2pcs."

Due to the high torque load on the bonding of tires on largescale cars, checking the bonding from time to time and re-glueing (y0067) if necessary is unavoidable.

Durchmesser x Breite / diameter x width 145 x 80 mm
Rim with 18 mm square drive

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Alternatives

Average rating of 0 out of 5 stars

y1613 Mammoth Supergrip mounted and glued on silver FG rims
Genuine rc-car-online spare/option part.The optimal parking lot or race tires for your FG Racetruck model.Type Width Outer diameterFront 64 mm 153 mmRear 78 mm 153 mmGlued on original FG-Racetruck rims (rear tire with extension to the inside), incl. foam rubber insert,FG rim with 18 mm square drive and reinforcement ring.Attention: From experience we warn against using rims and extensions from another manufacturer.Since the Mammoth tires provide a very good grip, the rim and bonding are extremely stressed. Due to the high torque load in relation to the bonding of tires on large models, an occasional check in this regard and possibly a repair of the bonding (y0067) is inevitable.As a recommendation:The dirtier the track or the colder the temperature, the softer the rear tire should be.Reference for the front tire: With 2WD models this should be one to two stages harder than the used rear tire. On 4WD models, a tire combination with the same shore hardness front and rear is often good to drive.Of course, with Mammoth Supergrip Racetruck tires, the softer the tire, the higher the wear.The Mammoth Supergrip Racetruck tires have a special onroad tread. Whereby these still have an optimal grip after the wear of the tread, and can still be driven for a long time.

€89.90*

Average rating of 0 out of 5 stars

6419/09 FG Slick tires rear S1/80mm 1:6 glued, 2 pcs.
Genuine FG spare/option part.Due to the high torque load on the bonding of tires on largescale cars, checking the bonding from time to time and re-glueing (y0067) if necessary is unavoidable.Measures:Diameter: 145 mmWidth: 80 mmRim with 18 mm square drive.

€98.95*

Average rating of 0 out of 5 stars

3109 FG Rear rim insert Trucks
Genuine FG spare/option part. Required for scale rim appearance. Suitable for 3105/02.Dimensions:Outside diameter: 100 mmInside diameter: 25 mmContent:2 pieces

€19.90*

Similar products

Average rating of 0 out of 5 stars

6350 FG Fuel tube - 1pce.
Fits Zenoah Tank 7348ID 3 mm x L 470 mm

€9.70*

Average rating of 0 out of 5 stars

6349 FG In-tank fuel filter, 1 pce.
Clunk felt filter, protects the carb against debris in the fuel.

€12.95*

Average rating of 0 out of 5 stars

6350/01 FG Rubber gaskets.
Genuine FG spare/option part.Suitable for FG 6350.Contents:2 pieces

€4.90*

Average rating of 0 out of 5 stars

6402/01 FG Exhaust hose
Genuine FG spare/option part. Heavy gauge teflon tube for connection between exhaust manifold and tuned pipe with da inside diameter from 21 mm and a length from 50 mm.You may have to heat the tube with a cigarette lighter for installation.Contents:1 piece

Content: 5 Zentimeter (€270.00* / 100 Zentimeter)

€13.50*

Average rating of 0 out of 5 stars

6268 FG Battery holder - 1pce.

€14.90*

Average rating of 0 out of 5 stars

6422 FG Plastic gearwheel 44 teeth - 1pce.
44 teeth plastic main gear for the layshaft.Diameter 69 mmWidth 15.5 mmTooth width 12 mmModule: m=1,5

€17.90*

Average rating of 0 out of 5 stars

6423 FG Gear protector for 42/44/46/48 T spur gears
Genuine FG spare/option part. Gearwheel protection in transparent polycarbonate for all 1:6 Off-Road, Monster-Beetle, Big-Foot and Truck models with the gearwheels 43, 44, 46, 48 teeth. Protects the driving gearwheels almost from dirt, sand and stones. We recommend the mounting when driving on car parks and Off-Road ground. Not suitable for Formel 1, Leopard 2 + 4 Competition, Competition and Competition Evolution models.Contents:1 piece

€43.90*

Average rating of 0 out of 5 stars

6299 FG Steel-Power 1:6 Tuning pipe FG 2WD and 4WD Off-Road
Genuine FG spare/option part. Newly developed tuned pipe made of strong steel sheet, with plug connecting system. The pipe mounts close to the car for best protection possible and versatile usability. Suitable for:FG 2WD and 4WD 1:6 Off-RoadSmartech 2WD off-road And for many other brand's 1/6 carsNot suitable for:FG Leopard2 2+4 WD Sportsline and CompetitionOn several pictures the pipe is shown with a silicone tube tailpipe extension, which is not included. It can be ordered separately as an accessory with part number 6299/03 or y0995.Content:1 piece

€254.90*

Average rating of 0 out of 5 stars

6299/04 FG Fabric tube Ø24 x 23 f. 06299, 1pce.
Item N° 06299/04 Fabric tube Ø24 x 23 f. 06299, 1pce.Spare part for:

€9.90*

Average rating of 0 out of 5 stars

6403 FG Spring band clamps 24 mm
Genuine FG spare/option part. Recommended accessory for installation of tuned pipes using teflon tube connectors. Contrary to standard hose clamps this version is self-readjusting down until 20 mm inner diameter!Width 12 mm.Content:2 pieces

€6.90*

Average rating of 0 out of 5 stars

6419/06 FG Slick tire rear S1 80mm for 1:6 models with insert - 2pcs.
Durchmesser x Breite / diameter x width 145 x 80 mm

€48.95*

Average rating of 0 out of 5 stars

6299/03 FG Silicon tube 12 x 3 x 110mm, 1pce.
Item N° 06299/03 Silicon tube 12 x 3 x 110mm, 1pce.Spare part for:

€9.90*

Customers also viewed

Average rating of 0 out of 5 stars

6419/09 FG Slick tires rear S1/80mm 1:6 glued, 2 pcs.
Genuine FG spare/option part.Due to the high torque load on the bonding of tires on largescale cars, checking the bonding from time to time and re-glueing (y0067) if necessary is unavoidable.Measures:Diameter: 145 mmWidth: 80 mmRim with 18 mm square drive.

€98.95*

Average rating of 0 out of 5 stars

Mammoth Supergrip for 1/6 and 1/5 offroad cars glued, 1 pair.
y0580rg Tires: Rear Hart, y0594+ 5EUR
Mammoth Supergrip complete gluedMammoth Supergrip for 1/6 and 1/5 offroad carsParking lot / race tires for your offroad car.VersionWidthOuter diameterFront64 mm153 mmRear78 mm153 mmGlued on genuine FG rims (rear tires using extension rings), with foam rubber inserts included. Rim has 18 mm square drive with reinforcement ring.Please note: based on experience we recommend against using other manufacturers rims and extensions. Since the Mammoth tires provide very good grip the rim and the bonding must withstand high loads. Due to the high torque load on the bonding of tires on largescale cars, checking the bonding from time to time and re-glueing (y0067) if necessary is unavoidable.The Mammoth Supergrip is available in in the following compounds: Super softSoftMediumHardFront tirey0581y0582y0583y0584Rear tirey0591y0592y0593y0594General recommendation:The dirtier the track or the lower the ambient temperatures, the stickier (softer) the rear tires should be.Hint regarding the front tires: 2WD cars should use them one or two grades harder then the rears. 4WD cars usually like the same compound all around.Of course, the softer the tire the higher the wear rate; and this applies to Mammoth Supergrip onroad tires as well.The tires have a special onroad thread pattern but will still provide ideal traction after the pattern has been worn out. The white lettering on the tires has been applied for presentation purpose only. The tires will be delivered with black sidewall.Prices per unit: FrontRearMammoth Supergrip:Pair44,90 EUR49,90 EURTire inserts:Pair13,00 EUR13,00 EURFG rim:Pair14,90 EUR14,90 EURFG extension ring:Pair--.-- EUR14,90 EURMounting:Pair13,00 EUR13,00 EURPrices Total                                                                                          85,80 EUR    105,70 EURAlso suitable for:With the following wheel adapter: y1183 Rim adapter

Variants from €69.90*
€74.90*

Average rating of 0 out of 5 stars

y1172 Mammoth offroad tires extra wide, mounted and glued on original silver FG 1:6 rim, 2 pcs.
Extra wide tire mounted and glued on genuine 1/6 scale FG buggy silver rims 3105/02 with silver extension ring 3106!Diameter 165 mm, width 80 mm. Fits all FG and Carson largescale cars, may fit other cars with 18 mm wheel squares as well.Available in three different compounds:softhard Unit price:- Mammoth tires extra wide: EUR 47.20 / pair- Mammoth inserts extra wide: EUR 9.90 / pair- genuine FG wide track rims 3105/02: EUR 14.90 / pair- genuine FG rim extension rings 3106: EUR 14.90 / pair- mounting + glueing rims / extensions / inserts / tires: EUR 13.00Total: EUR 99.90 Priced per pair.We have tried various rubber / tire compounds for several months on various forms of terrain, etc.. The Mammoth brings, due to its quite strong and large pins and the extreme width of the tire, especially on hard and low grip surfaces a high traction! The Mammoth is available in soft, medium and hard! The rule is: the harder the ground the softer the tire compound. Where other tires spin helplessly the Mammoth provides serious traction. With few exceptions, the Mammoth is usually for the rear axle only. The white lettering on the tires has been applied for presentation purpose only. The tires will be delivered with black sidewall. The disadvantage of Mammoth tires: Because of their extreme width they need to be mounted on FG wheels with extension rings and wide tire inserts (same as for the FG wide slicks), which is a labor intensive job. From experience, we must strongly recommend against using rims from another manufacturer in combination with extension rings. Due to the before mentioned traction no other rim has been up to the task! Broken rims and torn squares were the result. Due to the high torque load on the bonding of tires on largescale cars, checking the bonding from time to time and re-glueing (y0067) if necessary is unavoidable.However, the original FG-rim lasts without problems!Also suitable for:With the following wheel adapter: y1183 Rim adapter

€69.90*

Average rating of 0 out of 5 stars

s054430, Bumper, 1 pce.

€14.90*
%

Average rating of 0 out of 5 stars

FG Challenge 510 Line BMW M3 E30 with 26 cm³ FG engine RTR
With this robust and reliable FG chassis, which is equipped with a powerful 26 cm³ combustion engine, you get the ideal entry into the fascinating "royal class" of large scale RC models as well as into the competition.A roll cage was installed for more rigidity and protection of the vehicle.The model has a 510 wheelbase. The models are built on a 4 mm alloy chassis with double wishbones at front and rear axle. All borings of the alloy chassis are countersunk to prevent the screw heads from bearing out. The models are serial equipped with the 2-damper front axle which guarantees an optimal traction of both front wheels. At the front/rear axle you can adjust through track rods or adjusting screws with right-/left-handed thread the king pin angle, trailing effect and toe-in.Further equipment points are differential gear, 24 teeth steel pinion, oil-pressure shock absorbers with volume control and external adjusting ring for the initial spring preload. All rotating parts as shafts, axles and clutch bells a.s.o. are supported by ball bearings.Thanks to the numerous available option parts, you can upgrade your FG Challenge Line as required. Incl. RTR-equipment RTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed. Transmitter: Reflex Wheel Pro III 2,4 GHzReceiver: Mini BECHigh power servo for throttle and brakeLargescale servo for steeringTx-battery, rx-battery Dimensions:Length: 870 mmWidth: 392 mmHeight: 260 mmWheelbase: 510 mm

From €1,049.00* €1,189.90* (11.84% saved)

Average rating of 0 out of 5 stars

3105/02 FG Rim 1:6 silver
Genuine FG spare/option part. Suitable for FG Truck models and 1:6 Off-Road models (Marder, Beetle and Pajero and many more).Rim with 18 mm square driveDimensions:Diameter: 120 mmWidth: 61 mmContents:2 pieces / 1 pair

€29.90*
Loading...
Upload in progress, please be patient ...
Shopware-Agency Shopware-Theme Development