6416/08 Slick tires M1 63mm for 1:6 models glued - 2pcs.

€61.90*

Prices incl. VAT plus shipping costs

No longer available

This product is no longer available.

Product number: fg_6416_08

EAN: 4250324508232

This is the successor of the product:

6416/09 FG Slick tires M1 63mm for 1:6 models glued, 2 pcs.

€107.95*

Continue to product

Product information "6416/08 Slick tires M1 63mm for 1:6 models glued - 2pcs."

Due to the high torque load on the bonding of tires on largescale cars, checking the bonding from time to time and re-glueing (y0067) if necessary is unavoidable.

Durchmesser x Breite / diameter x width 145 x 63 mm
Rim with 18 mm square drive

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

No reviews found. Share your insights with others.

Alternatives

y1613 Mammoth Supergrip mounted and glued on silver FG rims

Genuine rc-car-online spare/option part.The optimal parking lot or race tires for your FG Racetruck model.Type Width Outer diameterFront 64 mm 153 mmRear 78 mm 153 mmGlued on original FG-Racetruck rims (rear tire with extension to the inside), incl. foam rubber insert,FG rim with 18 mm square drive and reinforcement ring.Attention: From experience we warn against using rims and extensions from another manufacturer.Since the Mammoth tires provide a very good grip, the rim and bonding are extremely stressed. Due to the high torque load in relation to the bonding of tires on large models, an occasional check in this regard and possibly a repair of the bonding (y0067) is inevitable.As a recommendation:The dirtier the track or the colder the temperature, the softer the rear tire should be.Reference for the front tire: With 2WD models this should be one to two stages harder than the used rear tire. On 4WD models, a tire combination with the same shore hardness front and rear is often good to drive.Of course, with Mammoth Supergrip Racetruck tires, the softer the tire, the higher the wear.The Mammoth Supergrip Racetruck tires have a special onroad tread. Whereby these still have an optimal grip after the wear of the tread, and can still be driven for a long time.

€89.90*

Details

Similar products

6350/01 FG Rubber gaskets.

Genuine FG spare/option part.Suitable for FG 6350.Contents:2 pieces

€4.70*

6350 FG Fuel tube - 1pce.

Fits Zenoah Tank 7348ID 3 mm x L 470 mm

€9.70*

6268 FG Battery holder - 1pce.

€13.90*

6402/01 FG Exhaust hose

Genuine FG spare/option part. Heavy gauge teflon tube for connection between exhaust manifold and tuned pipe with da inside diameter from 21 mm and a length from 50 mm.You may have to heat the tube with a cigarette lighter for installation.Contents:1 piece

Content: 5 Zentimeter (€244.00* / 100 Zentimeter)

€12.20*

6349 FG In-tank fuel filter, 1 pce.

Clunk felt filter, protects the carb against debris in the fuel.

€13.10*

6403 FG Spring band clamps 24 mm

Genuine FG spare/option part. Recommended accessory for installation of tuned pipes using teflon tube connectors. Contrary to standard hose clamps this version is self-readjusting down until 20 mm inner diameter!Width 12 mm.Content:2 pieces

€6.90*

6407/05 FG Mini pin M / OR tires, glued, white, 2 pcs.

Item N° 06407/05 Mini pin M / OR tires, glued, white, 2 pcs.Spare part for the Leopard 2010 2WD/4WD versionThe new FG Mini Pin tires are designed for harder grounds. They grant the model a lot of stability and tremendous grip in curves. 153 mm diameter64 mm wideThe version M is suitable for cooler temperatures lower than 20°, die version H is for temperatures over 20°. The tires are glued ready to run on the widened 1:6 wheels.These wheels are suitable for the FG Marder, Beetle, Off-Road Buggy and the monster models. Due to the high torque load on the bonding of tires on largescale cars, checking the bonding from time to time and re-glueing (y0067) if necessary is unavoidable.

€59.95*

6299/04 FG Fabric tube Ø24 x 23 f. 06299, 1pce.

Item N° 06299/04 Fabric tube Ø24 x 23 f. 06299, 1pce.Spare part for:

€9.50*

6423 FG Gear protector for 42/44/46/48 T spur gears

Genuine FG spare/option part. Gearwheel protection in transparent polycarbonate for all 1:6 Off-Road, Monster-Beetle, Big-Foot and Truck models with the gearwheels 43, 44, 46, 48 teeth. Protects the driving gearwheels almost from dirt, sand and stones. We recommend the mounting when driving on car parks and Off-Road ground. Not suitable for Formel 1, Leopard 2 + 4 Competition, Competition and Competition Evolution models.Contents:1 piece

€39.90*

6422/01 FG Plastic gearwheel 44 teeth 2-speed - 1pce.

44 teeth plastic main gear for the layshaft with 2-speed gear.Diameter 69 mmWidth 15.5 mmTooth width 12 mmModule: m=1,5

€17.90*

6267 FG Battery holder - set

Battery holder and pedestals for installation on chassis plates.BracketLength 157 mmWidth 24 mmDistance between mounting holes 140 mmPedestalsDiameter 8 mmHeight until top of platform 65 mmTotal height 75 mm

€19.90*

6299/05 FG Extension spring f. 06299/01, 3pcs.

Item N° 06299/05 Extension spring f. 06299/01, 3pcs.

€13.90*

Customers also viewed

y1613 Mammoth Supergrip mounted and glued on silver FG rims

y1613 Version: Version

€89.90*

6416/09 FG Slick tires M1 63mm for 1:6 models glued, 2 pcs.

Due to the high torque load on the bonding of tires on largescale cars, checking the bonding from time to time and re-glueing (y0067) if necessary is unavoidable.Durchmesser x Breite / diameter x width 145 x 63 mmRim with 18 mm square drive

€107.95*

This product is currently not available.

y1017 MadMax MAXI PIN tires complete set for Traxxas X-MAXX 4x4 with adapter

Offerset:2 Pairs MadMax Maxi Pin tires2 Pairs MadMax rims2 Pairs MadMax inlays2 Pairs / 4 pieces adapter TT1020/01MAXI PIN 185 x 75 with black colored MadMax Extreme rims, 20-fold screwed, very tough, with 24 mm hex drive and with reinforced beadlock rings for Losi and HPI. The MadMax MAXI PIN tires come with strong special tire inserts which allow transferring the power without canting, even on heavy cars. MadMax MAXI PIN tire was developed specifically for astro turf tracks! The special tread design with 480 studs per tire provides excellent grip, but also a high load on tire and rim! To stabilize the tire, the outer shoulder features radial ribs which minimizes the tilting under load and counteract the shear forces during cornering. Furthermore, the MAXI PIN tire has studs positioned on the outside shoulder, which support the steering in corners. All together the MAXI PIN tires provide maximum grip, which made it necessary to upgrade the beadlock screws on these MadMax EXTREME wheels. So they come with 3.0 mm screws instead of the usual 2.5 mm ones! Nevertheless, tires and beadlocks should be checked after every run.The set consists of four tires, including tire inserts and MadMax EXTREME rims and 4 pieces adapter wheel nuts TT1020/01. Dimensions: Outer diameter: 185 mm tire width at bead: 70 mm Tread width: 75 mm Reinforced 24 mm hex wheel drive The video shows the 18 mm square drive version. Also available with 24 mm hex. Some off-road tires knowledge can be found here!TT1020 Top Tuning Adapter wheel nutGenuine TopTuning spare/option part.These adapter nuts, manufactured from billet 7075 aluminum allow for easy and precise installation of all MadMax, HPI and Losi tires and rims on the Traxxas X-Maxx. For the best result possible, nut and adapter are manufactured as a one-piece unit.It should be noted that the wide rims can be used on the rear axle only. On the front axle they would limit the steering angle by grinding on lower a-arm and steering rod.Traxxas has microencapsulated the wheel shafts of the X-Maxx to secure the wheel nuts. Like any thread locking compound this is not for eternity. After several tire changes the use of a normal screw locking compound is advised, we recommend it "y0113 / 01 medium strength".The dimensions of the nut are specifically designed for use with MadMax, current HPI and Losi rims. Rims from Losi 5ive have slightly different dimensions in the hub area. This is meaningless on the large LOSI or HPI wheel adapters. With the smaller and shorter wheel nut thread of the X-Maxx wheel shafts you cannot compromise. Therefore there are also special nuts for the Losi rims/wheels available at our options menu.However, somewhere in the past, the injection moulds for the HPI rims were slightly modified in the hub area. As part of that job the bore diameter has probably been slightly increased. Therefore, the use of older rims in combination with the adapter nuts makes it necessary to increase the rim bore a little bit.Due to repeated requests for use: these wheel nuts replace the stock wheel nuts when installing the wheels!Contents:4 pieces

From €119.90*

Details

9540/07 Brake lining

Genuine FG spare/option part. Content:2 pieces

€33.90*