6106/09 FG Retaining washer 8 mm

6106/05 FG Snap rings 19,5mm for wheel square

Genuine FG spare/option part. Securing ring for positioning the brake disk on 11.5, 14 and 17mm square drives.Inner diameter unstretched 19.5 mm.Part is delivered in silver or black color from vendor!Contents:4 pieces

€4.60*

y6107/01 Wheel squares 18 mm HART-COAT, 14 mm wide

Genuine HT spare/option part.Wheel squares made of high-strength aluminum, hardened, with two M6 mounting threads Suitable for most 1/6 and 1/5 rc-cars. Through the use of two 6 mm screws a significantly higher retention force is achieved. Yet it is still recommended to use medium strength thread lock (link y0114)! The hard anodizing (HART-COAT) guarantees much lower wear of the squares! Especially recommended when using wheel mounted brake discs! Four 3x16 dowel pins per square are included which prevent the squares from spinning in the rim. Press fitting them into the wheel squares is optional. The 12, 14 and 17 mm wide squares feature a groove for inserting a C-clip (link 6106/05), which acts as a guide for the brake disk. The narrow 9.5 mm wide squares dont need a clip; the close sitting rim will guide the disk. Measures18 mm square (wheel drive!)14 mm wide, 8.0 mm diameter axle boretwo M6 mounting threads The set includes 2 pieces of 14 mm wide wheel squares and 4 pieces each of M6 grub screws and 3x16 dowel pins.Contents:2 pieces

€17.45*

6113 FG Wheel nuts M6 self-locking

Genuine FG spare/option part.Self locking wheel nuts with serrated base.Part is delivered in silver or black color from vendor!Contents:10 pieces

€7.30*

6115 FG Wheel nuts M8 with clamping

Genuine FG spare/option part. Part is delivered in silver or black color from vendor!Contents:10 pieces

€6.90*

y6107/02 Wheel squares 18 mm HART-COAT, 17 mm wide

Genuine HT spare/option part.Wheel squares made of high-strength aluminum, hardened, with two M6 mounting threads Suitable for most 1/6 and 1/5 rc-cars. Through the use of two 6 mm screws a significantly higher retention force is achieved. Yet it is still recommended to use medium strength thread lock (link y0114)! The hard anodizing (HART-COAT) guarantees much lower wear of the squares! Especially recommended when using wheel mounted brake discs! Four 3x16 dowel pins per square are included which prevent the squares from spinning in the rim. Press fitting them into the wheel squares is optional. The 12, 14 and 17 mm wide squares feature a groove for inserting a C-clip (link 6106/05), which acts as a guide for the brake disk. The narrow 9.5 mm wide squares dont need a clip; the close sitting rim will guide the disk. Measures18 mm square (wheel drive!)17 mm wide, 8.0 mm diameter axle boretwo M6 mounting threads The set includes 2 pieces of 17 mm wide wheel squares and 4 pieces each of M6 grub screws and 3x16 dowel pins.Contents:2 pieces

€18.95*

6106/07 FG Wheel square 11,5mm - 2pcs.

Wheel squares with 3 mm dowel pins. The pins prevent the squares from damaging the rims under high load. For all FG rims, holes may have to be drilled.11,5mm wide.Bore diameter 8 mm18 mm square

€23.90*

6107 FG Wheel square 9,5mm/M6

Genuine FG spare/option part. Square wheel driver in high-strength alloy material with M6 fixing thread. Essentially higher retention force. Suitable for all models.Dimensions:Square: 9,5 mm Width: 17 mmBore: 8 mmContent:1 pieces:

€15.90*

6110 FG E-clips set for 1:5 and 1:6 models

Genuine FG spare/option part. Universal safety clips set.Part is delivered in silver or black color from vendor!Content:3 mm5 mm6 mm7 mm

€9.50*

6099/01 FG Front shock mount for Monster-Truck

Genuine FG spare/option part. Suitable for all FG Monster-Truck und MB-Pro models.Dimensions:Height: 92 mmWidth: 160 mmContents:1 piece

€17.90*

6107/02 FG wheel square 17 mm/M6

Genuine FG spare/option part. Square wheel driver in high-strength alloy material with M6 fixing thread. Essentially higher retention force. Suitable for all models.Dimensions:Square: 18 mm Width: 17 mmBore: 8 mmContents:2 pieces

€16.90*

6096 FG Shock retaining screw M5

Genuine FG spare/option part.Suitable for all FG models for lower damper fastening except monster/stadium models with dual shock axles.Part is delivered in silver or black color from vendor!Dimensions:Length 23 mmThreaded length 7 mmShaft diameter 3.7 mmContents:4 pieces

€11.90*

6111 FG Clip for window grid

Genuine FG spare/option part.Clips for mounting the windows gitters on the FG marder bodies.Dimensions:Outer diameter: 12 mmFor 4 mm pinsContents:15 pieces

€7.90*

6106/09 FG Retaining washer 8 mm

Product information "6106/09 FG Retaining washer 8 mm"

Login