Skip to main content Skip to search Skip to main navigation
EXTRA 20% off Outlet*. Use Code: EXTRA20 at checkout!!
+49 2151 820200 Mon-Fri 9 am - 6 pm, Sa 9 am - 1 pm

5013 FG Roll cage support left/right

Product information "5013 FG Roll cage support left/right"

Genuine FG spare/option part.

018c58813a00715dbcf9aab740ca1b0f.jpg

A = 83 mm.

Contents:
  • 2 pieces

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Customers also bought

Average rating of 0 out of 5 stars

8064 FG Roll cage set for BMW E30
Genuine FG spare/option part. Suitable for BMW E30.For the assembly the mounts FG no. 5013 and 8013 are required.Contents:1 set

€54.75*

Average rating of 0 out of 5 stars

8013 FG Body mount middle for Audi. Calibra ITC
Genuine FG spare/option part. A = 113 mmB = 15 mmC = 9,4 mmContents:2 pieces

€14.50*

Average rating of 0 out of 5 stars

8042/01 FG Rear wing support 2WD/4WD, 530, 1/5
Genuine FG spare/option part.Keeps the rear wing from bending downwards under high downforce.Contents:1 setFor older 2WD models that are not based on the 4WD models, please refer to Sportsline 2008. or if an RC plate is no longer fitted, check Sportsline 13 in Parts Scout.There you will find the right spare parts for your vehicle.

€19.50*

Average rating of 0 out of 5 stars

6100/04 FG Turnbuckle left/right M8/40mm
Genuine FG spare/option part.steel version, 40 mm. Fits all FG except Formula 1.Contents:2 pieces

€12.50*

Average rating of 0 out of 5 stars

3010/04 FG Carbon fiber side guards 279 mm
Genuine FG spare/option part.Carbon side guard to protect chassis and body shell. Suitable for Race-Truck, Opel V8 and Ferrari body shell.Hole center distance: 279 mm.Contents:2 pieces

€56.95*

Average rating of 0 out of 5 stars

Mielke Hurricane mounting hardware, 5062, set
Replacement installation kit for the Hurricane system.

€6.95*

Similar products

Average rating of 0 out of 5 stars

4493/03 FG O-ring for servo saver
Genuine FG spare/option part. Spare part for 4493 and 4494. Thick: 3 mm.Contents:4 pieces

€3.90*

Average rating of 0 out of 5 stars

5014 FG RC-plate for 1:5/Truck/Leopard
Genuine FG spare/option part. Plastic radio plate for installation of up to 4 servos. Fits all FG street models (except Formula 1) and Leopard models.You will need FG #6118/05 for installation of any steering servo other than Hitec 805BB.Contents:1 piece

€19.90*

Average rating of 0 out of 5 stars

4483 FG CFK-body mount front, adjustable
Genuine FG spare/option part. Suitable for all FG touring cars and GT models. Not for Mercedes C291 and Porsche GT1.Contents:1 set

€46.90*

Average rating of 0 out of 5 stars

4483/01 FG Alloy-body mount front, adjustable
Genuine FG spare/option part. Suitable for all FG touring cars and GT models. Not for Mercedes C291 and Porsche GT1.Contents:1 set

€34.99*

Average rating of 0 out of 5 stars

4493 FG Alloy servo saver 04 complete
Genuine FG spare/option part.This servo saver is an improvement of the 04 version. The servo saver part A is now equipped with a flanged sleeve which prevents the servo saver spring from rubbing against the servo saver shaft.Suitable for all FG models.Contents:1 set

€62.95*

Average rating of 0 out of 5 stars

4478 FG Alloy riser plates for rear axle
Genuine FG spare/option part. The complete rear axle assembly is bolted to the solid alloy riser plates. You can now install this unit with only 4 countersunk screws to the chassis, which makes for a very fast change of the complete end.Replacement for plastic base plate FG 7068.Height 9 mmContent:2 pieces

€44.95*

Average rating of 0 out of 5 stars

4493/32 FG Reinforced o-rings for FG servo saver, 3.5 mm
Genuine FG spare/option part. Reinforced o-rings for FG servo savers 4493 and 4494. The stock units have a thickness of 3.5 mm.Contents:4 pieces

€3.30*

Average rating of 0 out of 5 stars

4493/06 FG O-ring for servo saver, 6x13x4 mm
Genuine FG spare/option part.Reinforced o-rings for FG servo savers 4493 and 4494. The stock units have a thickness of 3 mm. The use of these o-rings increases servo saver hardness. For use in combination with metal gear servos only! Dimensions:Inner diameter: 6 mm.Outer diameter: 13 mm.Material thickness: 4 mm.Contents:4 pieces

€4.30*

Average rating of 0 out of 5 stars

5010/02 Chassis for FG Sportsline 2WD-465 elektric Porsche GT2
1 pieces

€149.00*

Average rating of 0 out of 5 stars

4494/03 FG Ball bearing 7x14x5 mm
Genuine FG spare/option part. Contents:2 pieces

€3.90*

Average rating of 0 out of 5 stars

4530/07 FG Titanium wishbone turnbuckle M7x64 mm
Genuine FG spare/option part. Corrosion resistant and 40 % less weight compared to steel.Contents:2 pieces

€19.90*

Average rating of 0 out of 5 stars

5010/01 FG Alloy chassis Sportsline short wheelbase 465 mm
Genuine FG spare/option part. Replacement chassis for FG touring car EcoLine/SportsLine models with short wheel base 465 mm.4 mm alu-chassis. Contents:1 piece

€151.99*

Customers also viewed

Average rating of 0 out of 5 stars

8013 FG Body mount middle for Audi. Calibra ITC
Genuine FG spare/option part. A = 113 mmB = 15 mmC = 9,4 mmContents:2 pieces

€14.50*

Average rating of 0 out of 5 stars

7317/08 FG Clutch spring for CY / Zenoah
Genuine FG spare/option part.Contents:1 piece

€5.90*

Average rating of 0 out of 5 stars

y1127 Carson / Smartech tuned pipe with manifold for 1/5 scale cars set
Complete tuned pipe system, will be delivered as shown with manifold, hose with clamps and variable mount. Fits FG and Carson touring cars / GTs with long wheel base.The tuned pipe is for a 535 wheelbase. The diameter is 51 mm and the complete length is about 300 mm.

€99.90*

Average rating of 0 out of 5 stars

8064 FG Roll cage set for BMW E30
Genuine FG spare/option part. Suitable for BMW E30.For the assembly the mounts FG no. 5013 and 8013 are required.Contents:1 set

€54.75*

Average rating of 0 out of 5 stars

FG Sportsline Drift Chassis 4WD-510 with BMW E30 body
This drift car is based on the 4WD Sportsline chassis and is equipped as follows:Aluminum engine mount, aluminum spur gear carrier, low gear ratio, universal drive shafts, stiffer shocks and special slick tires.The high-quality polycarbonate body is a faithful replica of the BMW M3 E30.Option parts included:Large and small engine mount 66215 - 6485/01Front universal drive shafts 68415Aluminum spur gear carrier 7439Steel hub for brake disk 06042/05You can select the car with complete RTR-equipment from the options menu. RTR-equipment RTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed. Transmitter: Reflex Wheel Pro III 2,4 GHzReceiver: Mini BECHigh power servo for throttle and brakeLargescale servo for steeringTx-battery, rx-battery The RTR version of the car includes servos, transmitter, receiver, rechargeable batteries for transmitter / receiver.The 4WD Sportsline chassis opens up a new era within the Touring and Sportscar class of large scale model cars. Main target was the development of a chassis with supreme driving dynamics and ultimate performance. Maximum traction as well as easy handling, sufficient grip in curves, only a fourwheel powered model offers all these advantages. With the new 4WD Sportsline series FG Modellsport once again sets a trend at 1:5 scale.The 4WD Sportsline chassis is delivered with a wheelbase of 510mm. The fourwheel drive is carried out over an almost wear resistant tooth belt. 2 differential gears, tank with snap closure and a powerful engine with Tuning pipe turn the Sportsline 4WD chassis into a high-class 1:5 scale model with outstanding driving characteristics.You can choose this 4WD model with 2.4 GHz radio control system, servos, batteries in our configurator.The engine runs with a 2-stroke petrol-oil mixture. Through the installed pull-start system the engine can be started without any problems. A tank filling enables you to run your model around 45 minutes. Equipment and technical description of the 4WD Sportsline Mini Cooper:Solid 4mm chassis made of high-quality aluminium low-wear belt drive splash-proved 2 differential gears double wishbones at front and rear axle toe-in, castor and wheel camber adjustable at the axles - rear FG ball drive all steel driving components hardened all rotating parts ball-beared servo relieving servo saver front disk brake rear gear brake with big brake disk 700ccm fuel tank with snap closure oil-pressure shock absorbers with volume control and spring adjusting ring 26 cm³ combustion engine with Tuning pipe fabric hollow chamber tires with inserts receiver box and battery holder optional painted polycarbonate bodyshell with decals and with the RTR version the 2.4 GHz pistol grip radio control system with steering and gas servoDimensions:Length: 830 mmWidth: 405 mmHeight: 260 mmWheelbase: 510 mmWeight: 10,2 kgPainting tips:

From €1,479.90*
Loading...
Upload in progress, please be patient ...
Shopware-Plugin Development Shopware-Agency