4846 HPI Sand Buster Rib Tire M compound 170x80 mm
Product information "4846 HPI Sand Buster Rib Tire M compound 170x80 mm"
Genuine HPI spare/option part.
Fits for Baja 5B/Front.
Perfect for racing on rough and grassy surfaces, these front square block pattern tyres for the Baja are what every Baja racer has been begging for! Great in long and short grass conditions and designed by the HPI R&D team, you don't have to look any further for amazing front-end traction!
Content:
Fits for Baja 5B/Front.
Perfect for racing on rough and grassy surfaces, these front square block pattern tyres for the Baja are what every Baja racer has been begging for! Great in long and short grass conditions and designed by the HPI R&D team, you don't have to look any further for amazing front-end traction!
Content:
- 2 pieces / 1 pair
Login
Accessories / Spare parts
Medium firmness molded tire inserts with shaped shoulders and recesses to match the beadlock fittings.The medium shore hardness compound of the colored top quality tire inserts provides optimal support for the tire's shoulder and allows for perfect rolling characteristics of the tire. The perfect tire insert for the MadMax tires with 170 / 190 mm tire diameter is available in two widths.Fits 10-spoke GPM-racing aluminum rims (Losi / HPI). Applications:for 60 mm tire width: # y1321/01for 80 mm tire width: # y1321/02for GIANT-GRIP #y1321/06
Similar products
Genuine FG spare/option part. The sides of the Monster Truck tires were reinforced and now we deliver these tires without fabric insert. The advantages are a better lateral traction and more grip.diameter x width: 210 mm x 115 mmThe set includes two tires and two tire inserts.Contents:2 pieces
Genuine HPI spare/option part. Baja 5T/Rear - Losi 5ive-T Sand Buster-T Rib front and Sand Buster-T Paddle rear tires are now available from HPI Racing. These tires are designed specifically for the Baja 5T truck.Sand Busters-T Rib fronts have a rib down the center of the tire to cut through the sand for stable steering, and the Sand Buster-T Paddle rears have 10 large paddles for maximum traction in sand and soft dirt. Sand Buster's are designed for the sand, but you can also run them in loose dirt and even in the mud!Suitable for Losi 5ive-T as well (paddles all around).Contents:2 pieces / 1 pair
The sides of the Monster Truck tires were reinforced and now we deliver these tires without fabric insert. The advantages are a better lateral traction and more grip.diameter x width 210 x 115 mmThe set includes two tires and two tire inserts.
Genuine MadMax spare/option part.Losi and HPI foam tire inserts from can be used.The BIG DIGGER tires had 84 extremely strong tread blocks on the front tires and 96 on the rears, with more than 1 cm² cross-section and 6 mm tread depth, allow for best power transfer and provide excellent grip even on loose surfaces like sand or soil. Dimensions:Outer diameter: 170 mmTyre width front: 60 mmTyre width rear: 80 mmContents:4 pieces / 2 pairs Some off-road tires knowledge can be found here!
Genuine MadMax spare/option part.Losi and HPI foam tire inserts from can be used.The GIANT GRIP provides giant traction through 96 about one cm² wide and 5 mm high strong lugs, getting ample grip even on loose surfaces like sand and soil. Dimensions:Outer diameter: 190 mmTyre width: 70 mmContents:2 pieces / 1 pair Some off-road tires knowledge can be found here!
Genuine MadMax spare/option part.Losi and HPI foam tire inserts from can be used.The BIG DIGGER tires had 84 extremely strong tread blocks on the front tires and 96 on the rears, with more than 1 cm² cross-section and 6 mm tread depth, allow for best power transfer and provide excellent grip even on loose surfaces like sand or soil. Dimensions:Outer diameter: 170 mmTyre width: 80 mmContents:2 pieces / 1 pair Some off-road tires knowledge can be found here!
Genuine MadMax spare/option part.Losi and HPI foam tire inserts from can be used.The BIG DIGGER tires had 84 extremely strong tread blocks on the front tires and 96 on the rears, with more than 1 cm² cross-section and 6 mm tread depth, allow for best power transfer and provide excellent grip even on loose surfaces like sand or soil. Dimensions:Outer diameter: 170 mmTyre width: 60 mmContents:2 pieces / 1 pair Some off-road tires knowledge can be found here!
mammoth Rubber compound:
hard, y1162
Extra wide tire that fits 1/6 scale FG buggy/truck rims with extension ring!Diameter 165 mm, width 80 mm. Fits all FG and Carson largescale cars, may fit other cars with 18 mm wheel squares as well.HPI Baja 5 cars can also use these tires when equipped with special adapters.Available in three different compounds:mediumhard Prices are per pair (w/o inserts)We have tried various rubber / tire compounds for several months on various forms of terrain, etc.. The Mammoth brings, due to its quite strong and large pins and the extreme width of the tire, especially on hard and low grip surfaces a high traction! The Mammoth is available in soft, medium and hard! The rule is: the harder the ground the softer the tire compound. Where other tires spin helplessly the Mammoth provides serious traction. With few exceptions, the Mammoth is usually for the rear axle only. The disadvantage of Mammoth tires: Because of their extreme width they need to be mounted on FG wheels with extension rings and wide tire inserts (same as for the FG wide slicks), which is a labor intensive job. The white lettering on the tires has been applied for presentation purpose only. The tires will be delivered with black sidewall. From experience, we must strongly recommend against using rims from another manufacturer in combination with extension rings. Due to the before mentioned traction no other rim has been up to the task! Broken rims and torn squares were the result. However, the original FG-rim lasts without problems!
Genuine MadMax spare/option part.Losi and HPI foam tire inserts from can be used.The OVER LANDER MadMax are designed as all-terrain tires that can be used on virtually all surfaces because of its tightly attached lug tread pattern When a terrain includes sand, gravel and grass, the OVER LANDER is the right choice! It can even be used on partially paved tracks! Dimensions:Outer diameter: 170 mmTyre width: 60 mmContents:2 pieces / 1 pair Some off-road tires knowledge can be found here!
1 pair of GRP offroad tyres hard with inserts. - Diameter 180 mm - width 70 mm Profile see photos.
Genuine MadMax spare/option part.Losi and HPI foam tire inserts from can be used.The OVER LANDER MadMax are designed as all-terrain tires that can be used on virtually all surfaces because of its tightly attached lug tread pattern When a terrain includes sand, gravel and grass, the OVER LANDER is the right choice! It can even be used on partially paved tracks! Dimensions:Outer diameter: 170 mmTyre width front: 60 mmTyre width rear: 80 mmContents:4 pieces / 2 pairs Some off-road tires knowledge can be found here!
vpin Rubber compound:
y1234/01 - Soft
The V-pin competition tire is particularly suitable for tracks with loose and sandy surface. The high tread profile, extended to the tire shoulder requires a high manufacturing cost. This tread design guarantees an extremely high side traction and provides maximum propulsion especially on surfaces like sand and loose soil for optimum. A well proven combination is the use of in the rear and V-pin at the front. By cutting of the tread profile of the V-pin tires you can adjust your car's handling easily. The partly or nearly complete removal of the V-pin tire's tread on the outside of the tire, greatly affects the tire's side bite when cornering.Please take a look at the corresponding pics:Pic A - very high lateral grip = car tends to oversteerPic B - high lateral grip = still sharp steering responsePic C - reduced lateral grip = neutral handlingPic D - low lateral grip = expect the car to understeerOf course, the before mentioned does depend on the track surface!Summarized: removing tread from V-Pin tires on the front axle will reduce oversteering, calm your car and make it easier to drive.When oversteering is extreme (e.g. high grass) you may even start cutting the tread on the inside shoulder. This can prevent your car from those annoying traction rolls.For very loose soil the soft compound is recommended, under normal condition the medium compound is usually your best choice.HPI Baja 5 cars can also use these tires when equipped with special adapters. Dimensions:Diameter: 163 mmWidth: 65 mmInner diameter: 106 mm
Customers also viewed
Genuine HPI spare/option part. The Hot Bodies off-road tyre range has expanded to fit the 1/5th scale Baja 5B from HPI! Equip your Baja buggy or truck with a full range of awesome performance-oriented tyres for the front and rear, including Rodeoo, Proto and Khaos rear tyres, plus the exclusive HB Double Blade 2WD front tyres! Use HB Baja tyres to put the hurt on the opposition! Content:2 pieces / 1 pair
grp_w79 Rubber compunt:
Extra Soft - GWH79X
Item N° GWH79 GRP 1:6 Buggy "GRIP" tire glued, 2 pcs.very aggressive bold x-pattern treadmoderate directional stabilityvery good lateral tractionvery good propulsionfor really loose surfacesTire diameter: 164 mm Tire width: 61 mmDue to the high torque load on the bonding of tires on largescale cars, checking the bonding from time to time and re-glueing (y0067) if necessary is unavoidable.Attention:On all 2WD cars (except Leopard 2WD) the front suspension must be equipped with the combination of uprights y0932 and steering rods FG #7028/01. Wheel squares FG #6107/02 must be used in front and rear. 4WD cars must only use the wheel squares FG #6107/02 in front and rear.
Genuine HPI spare/option part. Baja 5T/Rear - Losi 5ive-T Sand Buster-T Rib front and Sand Buster-T Paddle rear tires are now available from HPI Racing. These tires are designed specifically for the Baja 5T truck.Sand Busters-T Rib fronts have a rib down the center of the tire to cut through the sand for stable steering, and the Sand Buster-T Paddle rears have 10 large paddles for maximum traction in sand and soft dirt. Sand Buster's are designed for the sand, but you can also run them in loose dirt and even in the mud!Suitable for Losi 5ive-T as well (paddles all around).Contents:2 pieces / 1 pair
Genuine Carson spare/option part. Contents:1 set
Inklusive: Spektrum 780 KV Brushless Motor und Spektrum 160 Amp ESC Spektrum™ Firma® 160 Amp Brushless SMART ESCDer Regler ist wasserdicht, vollständig programmierbar und mit einem Hochstrom-IC5-Stecker versehen. Der Regler funktioniert mit den meisten brushless Motoren und ist mit LiPo und NiMH Akkus kompatibel. Die SMART-Technologie liefert Informationen wie Batteriespannung, Drehzahl, RX-Pack-Spannung und Geschwindigkeit direkt vom ESC, wenn das ESC mit der Spektrum Dashboard-App verwendet wird. 80+ KMH Spektrum Firma 4-Pol 780Kv Brushless MotorDer brushless Regler und Motor bieten unglaubliche Leistung mit einem 8S LiPo (nicht im Lieferumfang enthalten), und ermöglichen Geschwindigkeiten von über 80 KMH. Zur komplementierung des HPI Baja 5B wird noch die RTR-Austattung (Fernsteuerung, Servo), Fahrakku benötigt. Bauen Sie Ihren eigenen authentischen HPI Baja 5B Flux! wir haben auf euch gehört, der einzige originale HPI Baja 5B ist als Bausatz zurück! Diese HPI SBK-Kollektion besteht aus einem elektrisch und einem kraftstoffbetriebenen Modell. Als der HPI Baja 5B Buggy zum ersten Mal vorgestellt wurde, waren große RC-Modelle sehr teuer und für den durchschnittlichen RC-Bastler ziemlich schwierig, diese fantastische Größe zu erleben.Durch die Verwendung hochbeständiger Teile und innovativer Designmerkmale brachte HPI neuen Enthusiasten Offroad-Fahrzeuge im großen Maßstab und läutete eine neue RC-Ära ein! Jetzt können Sie diese Legende nachbauen und erleben! Erleben Sie den Nervenkitzel und die Aufregung, ein Auto zu bauen, das am Ende über 80 cm (fast 32 Zoll) lang und fast 10 kg (über 21 lb) wiegt! Wählen Sie Ihren eigenen Sender, Lenkservo, Motor, Controller und Batterien!Mit extra starken Antriebskomponenten wie dem Viskose-Drehmomentdifferential, super haltbaren Verbundzahnrädern mit interner Dämpfung und einem Vollmetall-Antriebsstrang ist das HPI Baja 5B Flux einsatzbereit. Der HPI Baja 5B SBK ist außerdem mit übergroßen und superstarken Aufhängungsteilen ausgestattet, mit großartiger HPI-Haltbarkeit! Mit seiner fachmännisch konstruierten geformten Verbundstoffaufhängung plus extra langen einstellbaren HD-Stoßdämpfern und soliden dreiteiligen Nylon-Beadlock-Rädern ist dieser Baja 5B SBK bereit für Rennen mit voller Geschwindigkeit auf jeder Offroad-Strecke! Das 4mm dicke Monocoque-Chassis aus 6061er Aluminium verleiht dem HPI Baja 5B den klassischen Look eines Wüstenrennbuggys. Präzise in Form gebogen, um maximale Festigkeit zu erreichen, bildet das Chassis die Befestigungspunkte für Motor und Aufhängung und bildet das Rückgrat des Autos. Für eine präzise Lenkung sorgt eine doppelte Zahnstange mit Ritzel und Nockenwellen-Servo-Saver. Aluminiumteile sind in kühlem Bronze eloxiert und die klassische Baja Desert Racer klare Polycarbonatkarosserie ist im HPI Baja SBK-Kit enthalten, bereit für Ihr eigenes Farbschema mit Ihrer Lexan-Farbe Ihrer Wahl Ihrer Lexan-Farbe Ihrer Wahl.RACING CHASSIS DESIGN & LAYOUTDas schmale Monocoque-Chassis aus steifem 4mm 6061er Flugzeugaluminium verleiht dem HPI Baja 5B SBK eine klassische Desert Race Buggy-Optik und extreme Steifigkeit und Langlebigkeit. Das U-förmige Chassis ist hinten mit einer dicken Kunststoff-Unterfahrschutzplatte geschützt, um Motor und Antriebsstrang zusätzlich zu schützen. Der Rohr-Überrollkäfig besteht aus schlagfestem Nylon und hat ein echtes Aluminiumdach, um den klassischen Look fortzusetzen. Der Überrollkäfig ist voll funktionsfähig und schützt Motor und Innenraum vor Crashschäden. Der Überrollkäfig, die Radiobox, die Karosserieteile, der Kotflügel, der Unterboden und das Getriebe sind alle mit Schnellzugriffsclips für eine einfache Wartung montiert.Beim Bau eines HPI SBK (Self Build Kit) haben Sie völlig freie Wahl. Zur Fertigstellung wird noch benötigt: Fernsteuerung mit Servo Fahrakkus (je 2x 3S oder 2x 4S) Ladegerät für Fahrakkus Zwei Dosen Spezifikationen: Offroad-Buggy-Bausatz im Maßstab 1:5 Bereit für Ihre 6S- oder 8S-LiPo-Elektronik Freie Wahl der Elektronik Geschlossene RC-Box Transparente Baja-Kapuze Einstellbare HD-Stoßdämpfer Monocoque-Fahrgestell Niedriger Schwerpunkt für überlegenes Handling Langer Federweg Ölgefülltes Viskose-Differential All-Terrain-Reifen Beadlock-Räder mit Metalleinsatz Hintere Stoßdämpferbrücke aus Aluminium Schutzplatten aus Hartplastik Verstellbarer Heckflügel Schneller Zugriff auf alle kritischen Wartungspunkte Doppelte Kniehebellenkung Nockenwellen-Servo-Saver Rennspezifische Innensechskant-Hardware Bronze eloxiert Kompletter Satz gummierter Kugellager Spezifikationen Chassis: Gesamtlänge: 817 mm Höhe: 255 mm Breite vorne: 460 mm Breite hinten: 480 mm Spurweite für 395 mm Spurweite hinten: 400 mm Radstand: 570 mm Reihenhöhe: 76 mm Federweg vorne: 95 mm Federweg hinten: 100 mm Gewicht: 9,6 kg Einstellbarer vorderer Sturz Sturzeinstellung für: mit Shims Sturzeinstellung hinten: mit Schraube Nachlauf für: einstellbar mit Unterlegscheibe; 22~25,5~29 Grad Fußleisteneinstellung für: mit Schraube Zehenspur hinten: fügt 0~4 Grad ein Flugzeugaluminium 6061 T6 Monocoque-Chassis Doppelquerlenkeraufhängung mit einstellbarem Rollzentrum vorne und hinten Antriebssystem: HD-Metallgetriebe mit abgedichtetem Getriebe Übersetzungsverhältnis: 8,382:1 Differential: Viskose Drehmomentsteuerung mit Silikonöl Stoßdämpfer: HD-Aluminium einstellbar Radtyp: 3-teiliges Beadlock-Design mit Metallnabe