Skip to main content Skip to search Skip to main navigation
EXTRA 20% off Outlet*. Use Code: EXTRA20 at checkout!!
+49 2151 820200 Mon-Fri 9 am - 6 pm, Sa 9 am - 1 pm

4823 HPI Sand Buster-T paddle tires M, 190 x 70 mm

Product information "4823 HPI Sand Buster-T paddle tires M, 190 x 70 mm"

Genuine HPI spare/option part. 

Baja 5T/Rear - Losi 5ive-T

Sand Buster-T Rib front and Sand Buster-T Paddle rear tires are now available from HPI Racing. These tires are designed specifically for the Baja 5T truck.

Sand Busters-T Rib fronts have a rib down the center of the tire to cut through the sand for stable steering, and the Sand Buster-T Paddle rears have 10 large paddles for maximum traction in sand and soft dirt. Sand Buster's are designed for the sand, but you can also run them in loose dirt and even in the mud!

Suitable for Losi 5ive-T as well (paddles all around).


Contents:
  • 2 pieces / 1 pair

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Accessories / Spare parts

Average rating of 0 out of 5 stars

4817 HPI Inner foam MS, 190 x 60 mm
Genuine HPI spare/option part. Baja 5T/For use with 190 x 60 mm tires/Medium SoftHPI Racing Molded Inner Foams are optional equipment for the front of the Baja 5T line of 1/5th scale trucks. These are moulded foam donuts that help support the tyre for stable performance. The "MS" compound is firmer than the stock foam donuts, giving the steering a precise feeling when making sharp steering transitions. Sold in pairs.Content:2 pieces / 1 Stück

€44.99*

Customers also bought

Average rating of 0 out of 5 stars

AT-5T004 ATOP Aluminum closed wheel nuts Losi 5ive-T/2.0/B, Mini, DBXL/2.0 and MTXL
Genuine ATOP spare/option part.CNC-machined from 6061-T6 aluminum by ATOP. Closed design, thread size M18 x 1,5 for Losi 5ive-T/B, Mini, DBXL and MTXL. Wrench size 24 mm, may fit other cars as well.Contents:4 pieces

€22.90*

Average rating of 0 out of 5 stars

LOS252108 Losi Front Diff Outdrive Shaft for Super Rock Rey
Genuine Losi spare/option part. Contents:1 set

€9.99*

Average rating of 0 out of 5 stars

SB022 GPM aluminum rear wheel bearing carriers for Losi Super Baja Rey / 2.0 / Rock Rey, 0°
Genuine GPM spare/option part. Rear wheel bearing carriers for Losi Super Baja Rey / Rock Rey, 0° toe-in (stock) made by GPM, machined from high grade 6061-T6 aluminum provide better fit for the bearings and therefore increase their life span.We recommend installing the ball bearings with a little dab of screw cement.Contents:2 pieces

€26.90*

Average rating of 0 out of 5 stars

TT1040 Top Tuning 24 mm hex wheel drives for Losi Super Baja Rey / 2.0 and Super Rock Rey / plastic spindles
Genuine Top Tuning spare/option part.TopTuning 24mm hex wheel drives are required if you want to run wheel combos with the standard 24mm hex drive (such as Losi 5ive-T/B; DBXL; HPI-Baja etc.!) on your Losi Super Baja-Rey and Super Rock Rey.The stock Super Baja-Rey / Super Rock Rey20 mm hex drives (# LOS252077) will be swapped for the TopTuning 24 mm version. No additional parts are required for installation of the 24 mm hex wheel drivers. The Losi Super Baja-Rey's fake brake discs and calipers must be removed prior to assembly.Attention: For the attachment of the wheels you also need wheel nuts with M18x1.5 thread (i.e. AT-5T004), which are also offered in our shop's option menu!Please note: The adapters only fit in combination with the standard plastic steering knuckles or wheel bearing carriers. The aluminium versions have a slightly larger bearing distance, which then prevents the drive pin from being fitted.As already mentioned in the Losi instruction manual, the gearing should be adjusted depending on terrain and tire tread.Depending on tire size the rear of the fender wells will need some cutting.Please note: the wide rear wheels from MadMax or HPI do not fit!This applies in particular to aggressive tread large diameter off-road tires and demanding terrain. In this case we recommend the profile regraded, nitrided 15T pinion # TT1021/07 from the TopTuning.Weight per piece 28 grams (original LOS25077 weighs 23 grams).Contents:2 pieces of 24 mm hex wheel drives, machined from 7075 aluminum2 pieces of hardened drive pins 3x23,8 mm

€24.90*

Similar products

Average rating of 0 out of 5 stars

6228/01 FG Big-Foot tires M with inserts
Genuine FG spare/option part. The sides of the Monster Truck tires were reinforced and now we deliver these tires without fabric insert. The advantages are a better lateral traction and more grip.diameter x width: 210 mm x 115 mmThe set includes two tires and two tire inserts.Contents:2 pieces

€62.95*

Average rating of 0 out of 5 stars

y1411 MadMax BIG DIGGER one pair front and one pair rear
Genuine MadMax spare/option part.Losi and HPI foam tire inserts from can be used.The BIG DIGGER tires had 84 extremely strong tread blocks on the front tires and 96 on the rears, with more than 1 cm² cross-section and 6 mm tread depth, allow for best power transfer and provide excellent grip even on loose surfaces like sand or soil. Dimensions:Outer diameter: 170 mmTyre width front: 60 mmTyre width rear: 80 mmContents:4 pieces / 2 pairs Some off-road tires knowledge can be found here!

€49.90*

Average rating of 0 out of 5 stars

4843 HPI Sand Buster Rib Tire M compound 170x60 mm
Genuine HPI spare/option part. Fits for Baja 5B/Front.Perfect for racing on rough and grassy surfaces, these front square block pattern tyres for the Baja are what every Baja racer has been begging for! Great in long and short grass conditions and designed by the HPI R&D team, you don't have to look any further for amazing front-end traction!Content:2 pieces / 1 pair

€39.90*

Average rating of 0 out of 5 stars

Mammoth offroad tires extra wide - 2pcs.
mammoth Rubber compound: soft, y1160
Extra wide tire that fits 1/6 scale FG buggy/truck rims with extension ring!Diameter 165 mm, width 80 mm. Fits all FG and Carson largescale cars, may fit other cars with 18 mm wheel squares as well.HPI Baja 5 cars can also use these tires when equipped with special adapters.Available in three different compounds:mediumhard Prices are per pair (w/o inserts)We have tried various rubber / tire compounds for several months on various forms of terrain, etc.. The Mammoth brings, due to its quite strong and large pins and the extreme width of the tire, especially on hard and low grip surfaces a high traction! The Mammoth is available in soft, medium and hard! The rule is: the harder the ground the softer the tire compound. Where other tires spin helplessly the Mammoth provides serious traction. With few exceptions, the Mammoth is usually for the rear axle only. The disadvantage of Mammoth tires: Because of their extreme width they need to be mounted on FG wheels with extension rings and wide tire inserts (same as for the FG wide slicks), which is a labor intensive job. The white lettering on the tires has been applied for presentation purpose only. The tires will be delivered with black sidewall. From experience, we must strongly recommend against using rims from another manufacturer in combination with extension rings. Due to the before mentioned traction no other rim has been up to the task! Broken rims and torn squares were the result. However, the original FG-rim lasts without problems!

€47.20*

Average rating of 0 out of 5 stars

y1411/02 MadMax BIG DIGGER one pair rear wheels 80 mm
Genuine MadMax spare/option part.Losi and HPI foam tire inserts from can be used.The BIG DIGGER tires had 84 extremely strong tread blocks on the front tires and 96 on the rears, with more than 1 cm² cross-section and 6 mm tread depth, allow for best power transfer and provide excellent grip even on loose surfaces like sand or soil. Dimensions:Outer diameter: 170 mmTyre width: 80 mmContents:2 pieces / 1 pair Some off-road tires knowledge can be found here!

€29.90*

Average rating of 0 out of 5 stars

y1413/02 MadMax OVER LANDER one pair rear tires 80 mm
Genuine MadMax spare/option part.Losi and HPI foam tire inserts from can be used.The OVER LANDER MadMax are designed as all-terrain tires that can be used on virtually all surfaces because of its tightly attached lug tread pattern When a terrain includes sand, gravel and grass, the OVER LANDER is the right choice! It can even be used on partially paved tracks! Dimensions:Outer diameter: 170 mmTyre width: 80 mmContents:2 pieces / 1 pair Some off-road tires knowledge can be found here!

€29.90*

Average rating of 0 out of 5 stars

4846 HPI Sand Buster Rib Tire M compound 170x80 mm
Genuine HPI spare/option part. Fits for Baja 5B/Front.Perfect for racing on rough and grassy surfaces, these front square block pattern tyres for the Baja are what every Baja racer has been begging for! Great in long and short grass conditions and designed by the HPI R&D team, you don't have to look any further for amazing front-end traction!Content:2 pieces / 1 pair

€44.90*

Average rating of 0 out of 5 stars

6229/01 FG Big-Foot tires H, inserts - 2pcs.
The sides of the Monster Truck tires were reinforced and now we deliver these tires without fabric insert. The advantages are a better lateral traction and more grip.diameter x width 210 x 115 mmThe set includes two tires and two tire inserts.

€62.95*

Average rating of 0 out of 5 stars

y1413/01 MadMax OVER LANDER one pair front tires 60 mm
Genuine MadMax spare/option part.Losi and HPI foam tire inserts from can be used.The OVER LANDER MadMax are designed as all-terrain tires that can be used on virtually all surfaces because of its tightly attached lug tread pattern When a terrain includes sand, gravel and grass, the OVER LANDER is the right choice! It can even be used on partially paved tracks! Dimensions:Outer diameter: 170 mmTyre width: 60 mmContents:2 pieces / 1 pair Some off-road tires knowledge can be found here!

€24.90*

Average rating of 0 out of 5 stars

y1411/01 MadMax BIG DIGGER one pair front wheels 60 mm
Genuine MadMax spare/option part.Losi and HPI foam tire inserts from can be used.The BIG DIGGER tires had 84 extremely strong tread blocks on the front tires and 96 on the rears, with more than 1 cm² cross-section and 6 mm tread depth, allow for best power transfer and provide excellent grip even on loose surfaces like sand or soil. Dimensions:Outer diameter: 170 mmTyre width: 60 mmContents:2 pieces / 1 pair Some off-road tires knowledge can be found here!

€24.90*

Average rating of 0 out of 5 stars

y1413 MadMax OVER LANDER one pair front and one pair rear
Genuine MadMax spare/option part.Losi and HPI foam tire inserts from can be used.The OVER LANDER MadMax are designed as all-terrain tires that can be used on virtually all surfaces because of its tightly attached lug tread pattern When a terrain includes sand, gravel and grass, the OVER LANDER is the right choice! It can even be used on partially paved tracks! Dimensions:Outer diameter: 170 mmTyre width front: 60 mmTyre width rear: 80 mmContents:4 pieces / 2 pairs Some off-road tires knowledge can be found here!

€49.90*

Average rating of 0 out of 5 stars

y1234 V-Pin 1/6 offroad competition tire
vpin Rubber compound: y1234/01 - Soft
The V-pin competition tire is particularly suitable for tracks with loose and sandy surface. The high tread profile, extended to the tire shoulder requires a high manufacturing cost. This tread design guarantees an extremely high side traction and provides maximum propulsion especially on surfaces like sand and loose soil for optimum. A well proven combination is the use of in the rear and V-pin at the front. By cutting of the tread profile of the V-pin tires you can adjust your car's handling easily. The partly or nearly complete removal of the V-pin tire's tread on the outside of the tire, greatly affects the tire's side bite when cornering.Please take a look at the corresponding pics:Pic A - very high lateral grip = car tends to oversteerPic B - high lateral grip = still sharp steering responsePic C - reduced lateral grip = neutral handlingPic D - low lateral grip = expect the car to understeerOf course, the before mentioned does depend on the track surface!Summarized: removing tread from V-Pin tires on the front axle will reduce oversteering, calm your car and make it easier to drive.When oversteering is extreme (e.g. high grass) you may even start cutting the tread on the inside shoulder. This can prevent your car from those annoying traction rolls.For very loose soil the soft compound is recommended, under normal condition the medium compound is usually your best choice.HPI Baja 5 cars can also use these tires when equipped with special adapters. Dimensions:Diameter: 163 mmWidth: 65 mmInner diameter: 106 mm

€39.90*

Customers also viewed

Average rating of 0 out of 5 stars

LOS45034 Losi Scoops Paddle Tire, DBXL-E 2.0
Genuine Losi spare/option part.Fits DBXL rims.Contents:1 pair / 2 pieces

€49.99*

Average rating of 0 out of 5 stars

66292 FG Alloy shock absorber 08 long, 4 mm - 2 pcs.
Item N° 66292 FG Alloy shock absorber 08 long, 4 mm - 2 pcs.Oil-pressure shock absorber Ø20mm, long version, upper damper mount 4 mm, spring adjustment ring, spring plate, various lower damper mounts. Suitable for the front axle of Off-Road Buggy 4WD, for the rear axle of Off-Road Buggy and Monster models 2WD.

€64.90*

Average rating of 0 out of 5 stars

y0732/02 GPM Big Scale adjustable 3 shoe clutch with tuning clutch bell for HPI models, 1 pce.
Regular price Big Scale Clutch: 109,90 EUR Nitriding hardened clutch bell: 40,50 EUR complete price:.......................150,40 EURAdjustable 3-shoe clutch for:Zenoah / Chung Yang / HPI - Fuelie / Smartech PT and many other engines.The delivery content:- y0730 GPM Big Scale-Cross adjustable 3 shoe clutch, 1 pce. - y0729 Gas-nitrited tuning clutch bell for HPI Baja, 1 pce. The Gas-nitrited tuning clutch bell:Gas-nitrited tuning clutch bell machined from high grade steel with a hole for easy clutch adjustment. Special vents remove dirt and clutch lining debris automatically, preventing it from accumulating in the clutch bell and causing premature wear to clutch bell and linings. They aid in cooling of the clutch bell as well. The clutch bell features a significantly reinforced wearing surface and face which guarantees dimensional stability even under high loads! The shaft is a tiny bit longer than stock (about 0.2 mm) to prevent the bearings from binding. Since this clutch bell is single-piece machined from bar stock there is no weld bead on the inside of the face plate. The gained space allows now to use the adjustable GPM Big Scale-Cross clutch. Suitable for genuine slot drive HPI pinions. Comes with bolts and spring washers included.The GPM-Big Scale clutch:Suitable for racing and for the ambitious hobbyist driver. Unlike the stock clutch, the installed GPM-Big Scale clutch can be adjusted by turning one single screw. A 2.5 mm allen key wrench is required for this application.Therefore it is possible to precisely adjust the clutch engagement depending on track characteristics.Handling instructions for three-shoe clutches y0730 GPM Big Scale Cross and y0731 GPM Big Scale RaceInstallation:The GPM Big Scale clutch will be bolted to the crankshaft using the supplied CSH-screw.It should be noted that the use of thread locking compound on that screw is neither necessary nor recommended!Removal:Remove the CSH-screw with a 4mm Allen wrench; then insert a suitable M8 bolt and remove the clutch from the crankcase cone by tightening that bolt. Hole for adjustment:For clutch adjustment without removing the clutch bell a 4 4.5 mm hole must be drilled into the clutch bell for access to the adjustment screw. Placement of the hole depends on clutch bell dimensions and car; so you have to make your own measurements for the placement of the hole.It is important that the drilled hole is thoroughly deburred (at least on the inside of the clutch bell) to prevent excessive clutch pad wear. Breaking in:A new clutch or shoes fitted with new pad should always be broken in. Therefore the clutch engagement speed should not be too high for the first tank of fuel. This gives the lining the possibility to adjust to the clutch bell without glazing. The only difference between two clutches is the clutch spring rate, which provides the optimal range for clutch engagement depending on the application. The three available versions of clutch springs provide adjustability within the following RPM ranges:Silver springs 1.3 mm y0730/05 (standard on Big Scale Cross): 5,000 9,500 RPMGold springs y0730/06 1.4 mm (standard on Big Scale Race): 6,500-11,500 rpm Adjustment:Adjustment of the clutch engagement speed is done by one single screw using a 2.5 mm Allen wrench. Turning the screw in increases the stall speed, backing it out will lower the stall speed. The adjusting screw is thread locked to keep the setting. Should you realize that the screw can be turned too easily please re-apply medium strength thread locking compound.Finding the best clutch engagement speed:The best clutch engagement speed should be found while driving on the track, it depends on engine characteristic, track layout, track surface and driving style.It is recommended to start with the lowest setting (which means the set screw just touching the adjustment cam) and gradually turning the adjusting screw in while doing test runs after every adjustment.If you feel that you have exceeded your best engagement speed (clutch will slip too much), back the screw out for a little bit to avoid excessive wear or glazing of the pads.Attention: You must use adhesive y0743 Clutch-Safe when replacing clutch pads!

€129.99*
Loading...
Upload in progress, please be patient ...
Shopware-Agency Shopware-Plugin Development