4406 FG Axially displaced front alloy uprights 3 mm

€124.95*

Available

Product number: fg_4406

EAN: 3410564502327

Product information "4406 FG Axially displaced front alloy uprights 3 mm"

Genuine FG spare/option part.

Axially displaced front uprights, the thread for the upper ball is relocated for 3mm towards the center of the car. This increases negative camber and changes the scrub radius during turns.

Fits all touring car and race truck models, does not fit offroad and GT-models with wide front axle.

Contents:

2 pieces

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Accessories / Spare parts

4406/01 FG Alloy upright axially displaced left

Genuine FG spare/option part. One piece replacement upright left for 4406.Contents:1 piece

€56.95*

4406/02 FG Alloy upright axially displaced right

Genuine FG spare/option part. One piece replacement upright right for 4406.Content:1 piece

€56.95*

4406/07 FG Alloy steering lever 04

Genuine FG spare/option part. One piece replacement steering lever suitable for 4403/01, 4404 and 4406. Contents:1 piece

€52.50*

4402 FG Alloy steering stop for alloy uprights

Genuine FG spare/option part. A buckling of the inner front wheel in curves becomes impossible when mounting the alloy steering stop.Suitable for 6103/05, 6103/06, 4403, 4403/01, 4404 and 4406.Dimensions:Length: 24 mmDiameter: 7 mmThread: M4 Contents:2 pieces

€13.90*

Similar products

4412 FG Driveshaft boots

Genuine FG spare/option part. Suitable for all FG models and other. To complete one car you need two sets.For 2WD models you need two sets and for 4WD models you need four sets.Contents:2 pieces

€19.90*

4411/06 FG bearing set with grease filling EVo/Competition

Genuine FG spare/option part. FG ball bearing with heat resistant grease filling up to 180°. Therefore essentially improved durability of the wheel bearings and the clutch bell.For all FG cars with alloy differential case except 4WD and Formula 1.Contents:Eight pieces: 8 x 22 x 7 mmTwo pieces: 10 x 22 x 6 mmTwo pieces: 10 x 19 x 7 mmTwo pieces 15 x 28 x 7 mm

€35.95*

3262/01 FG Vehicle decals set CAT-Truck

Genuine FG spare/option part.Contains the stickers of the headlights, the rear lights and the radiator grill.Not included are the advertising labels for the original design. Please order separate.Dimensions:435 x 145 mmContents:1 piece

€16.10*

3438 FG Body detailing kit Truck

Genuine FG spare/option part.Contents:1 set

€19.90*

4152/01 FG Audi A4 DTM flaps

Genuine FG spare/option part. The set includes two pieces of white flaps with screws.Fits body shells 4149 and 4149_01.Contents:1 set

€12.90*

4173/01 FG Vehicle decals Audi R8 LMS

Genuine FG spare/option part. Contains the vehicle specific decals for an original appearance.Contents:1 set

€49.50*

3152/01 FG Extended rear mount Trucks

Genuine FG spare/option part. Rear body mount, bolts to rear shock stay. Suitable for Atego and Mercedes Benz 1834.Dimensions:Total length: 65mmLength until body support: approx. 55mmContents:1 piece

€15.50*

3259 FG Body set Street Truck 4WD

Genuine FG spare/option part. Former: "MB 1834" Truck. The set contains the main body, the driver's cab, the driver's cab side parts and the body screws.The rear bumper won't be delivered and has to be ordered separate. The set is delivered not painted.Dimensions:Length: 870mmWidth: 435mmHeight: 390mmWheelbase: 535mmContents:1 setPainting tips:

€255.50*

Details

3258 FG Rear bumper 1834/Atego

Original FG Ersatz-/Tuningteil.Suitable for 1834 and Atego body shells. Bumper is delivered not painted but inclusive the mounts.Inhalt:1 StückPainting tips:

€43.75*

4171 FG Front body Audi R8 clear

Genuine FG spare/option part. Contents:1 piece

€52.95*

3105/02 FG Rim 1:6 silver

Genuine FG spare/option part. Suitable for FG Truck models and 1:6 Off-Road models (Marder, Beetle and Pajero and many more).Rim with 18 mm square driveDimensions:Diameter: 120 mmWidth: 61 mmContents:2 pieces / 1 pair

€29.90*

4402 FG Alloy steering stop for alloy uprights

€13.90*

Customers also viewed

y0932 HT Alloy front uprights for FG / Smartech

Genuine FG spare/option part. Machined alloy front uprights with replaceable steering arm, accept 608 sized bearings (8 x 22 x 7 mm, stock size). Fits all FG (except 4wd models) and Carson / Smartech 2WD 1/5 and 1/6 cars.included in delivery contents:4 x M5 x mm screws8 x M3 x mm screws8 x M5 x mm washerFor installation in offroad cars you will need shorter steering rods 7028/01.Contents:2 pieces

€129.90*

4406/07 FG Alloy steering lever 04

Genuine FG spare/option part. One piece replacement steering lever suitable for 4403/01, 4404 and 4406. Contents:1 piece

€52.50*

6000CZ30 FG Marder 2WD Legend 30 Years - limited and numbered special edition

To celebrate the 30th anniversary of the legendary Marder 1/6 scale 2WD buggy, FG Modellsport/T2M releases a special edition, limited to 300 numbered pieces, with the original signature of Franz Gröschl on the sticker sheet as well as a top equipment (G260RC Zenoah engine, hi-capacity low friction aluminum shock absorbers and special aluminum engine mounts). with original 260 Zenoah with Low-Friction Alu shocks with alloy enginemount The Models is built on a 4 mm u-bended chassis. All borings of the lower side are countersunk, therefore the screw heads can't bear out.Double wishbones at font and rear axle as well as 4 bulk oil-pressure shock absorbers guarantee perfect ground adherence. All rotating parts are supported by ball-bearings. Rear gear wheels, differential gears and all driving elements are case-hardened. The side guards protect the model from dirt. With original signature of Franz Gröschl. The model is equipped with a powerfull 26 ccm engine which runs with normal 2-stroke petrol-oil mixture (available at every petrol station). The tank filling of 0,7 liters enables you to drive about 45 minutes. The engine can be started without difficulties through the integrated pull-start. To complete the models all merchantable servos and radio control systems are suitable.You can select the car with complete RTR-equipment from the options menu. RTR-equipment RTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed. Transmitter 2,4 GHzReceiverHigh power servo for throttle and brakeLargescale servo for steeringTx-battery, rx-battery

€799.99*

Configure now

8489 FG O-Ring - 2pcs.

Suitable for all alloy differential housings.

€3.90*