Skip to main content Skip to search Skip to main navigation
EXTRA 20% off Outlet*. Use Code: EXTRA20 at checkout!!
+49 2151 820200 Mon-Fri 9 am - 6 pm, Sa 9 am - 1 pm

3259 FG Body set Street Truck 4WD

Product information "3259 FG Body set Street Truck 4WD"

Genuine FG spare/option part.

Former: "MB 1834" Truck.

The set contains the main body, the driver's cab, the driver's cab side parts and the body screws.
The rear bumper won't be delivered and has to be ordered separate. The set is delivered not painted.

Dimensions:
  • Length: 870mm
  • Width: 435mm
  • Height: 390mm
  • Wheelbase: 535mm


Contents:
  • 1 set


Painting tips:

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Accessories / Spare parts

Average rating of 0 out of 5 stars

3255/01 FG Body Street Truck 2WD/4WD
Genuine FG spare/option part.The set is delivered not painted.Dimensions:Length: 820 mmWidth: 435 mmHeight: 170 mmWheelbase: 535 mmContents:1 piecesPainting tips:

€161.95*

Average rating of 0 out of 5 stars

3256 FG Front drivers cabin Street Truck
Genuine FG spare/option part.Contains only the driver's cab front part. The driver's cab front part will be delivered unpainted.Contents:1 piecePainting tips:

€98.50*

Average rating of 0 out of 5 stars

3257 FG Rear drivers cabin Street Truck
Genuine FG spare/option part.Contains only the driver's cab rear part. The driver's cab front part will be delivered unpainted.Contents:1 piecePainting tips:

€94.90*

Average rating of 0 out of 5 stars

3258 FG Rear bumper 1834/Atego
Original FG Ersatz-/Tuningteil.Suitable for 1834 and Atego body shells. Bumper is delivered not painted but inclusive the mounts.Inhalt:1 StückPainting tips:

€47.90*

Customers also bought

Average rating of 0 out of 5 stars

y0580 Mammoth Supergrip for 1/6 and 1/5 offroad cars glued
If you want a special combination of compounds please enter that information into the "note to us" form field at the end of the checkout process.Mammoth Supergrip for 1/6 and 1/5 offroad cars. Fits too for Formular 1 models!Parking lot / race tires for your offroad car.VersionWidthOuter diameterFront64 mm153 mmRear78 mm153 mmGlued on genuine FG rims (rear tires using extension rings), with foam rubber inserts included. Rim has 18 mm square drive with reinforcement ring.Please note: based on experience we recommend against using other manufacturers rims and extensions. Since the Mammoth tires provide very good grip the rim and the bonding must withstand high loads. Due to the high torque load on the bonding of tires on largescale cars, checking the bonding from time to time and re-glueing (y0067) if necessary is unavoidable.The Mammoth Supergrip is available in in the following compounds: Super softSoftMediumHardFront tirey0581y0582y0583y0584Rear tirey0591y0592y0593y0594General recommendation:The dirtier the track or the lower the ambient temperatures, the stickier (softer) the rear tires should be.Hint regarding the front tires: 2WD cars should use them one or two grades harder then the rears. 4WD cars usually like the same compound all around.Of course, the softer the tire the higher the wear rate; and this applies to Mammoth Supergrip onroad tires as well.The tires have a special onroad thread pattern but will still provide ideal traction after the pattern has been worn out. The white lettering on the tires has been applied for presentation purpose only. The tires will be delivered with black sidewall.Prices per unit: FrontRearMammoth Supergrip:Pair44,90 EUR49,90 EURTire inserts:Pair13,00 EUR13,00 EURFG rim:Pair14,90 EUR14,90 EURFG extension ring:Pair--.-- EUR14,90 EURMounting:Pair13,00 EUR13,00 EURTotal Price                                                                                            85,80 EUR    105,70 EUR = 191,50 EUR SETTotal for 1 pair each front and rear: 169,90 EUR================================Also suitable for:With the following wheel adapter: y1183 Rim adapter

€119.90*

Average rating of 0 out of 5 stars

y1441/02 Audi RS5 DTM polycarbonate rear wing with mounts
Genuine HT spare/option part. Fits Audi RS5 DTM body shell.Dimensions: Length: 325 mmWidth: 60 mmDistance between mounting holes: 130 mmMaterial thickness: 2 mm Contents:1 piece

€24.90*

Similar products

Average rating of 0 out of 5 stars

4412 FG Driveshaft boots
Genuine FG spare/option part. Suitable for all FG models and other. To complete one car you need two sets.For 2WD models you need two sets and for 4WD models you need four sets.Contents:2 pieces

€18.50*

Average rating of 0 out of 5 stars

4173/01 FG Vehicle decals Audi R8 LMS
Genuine FG spare/option part. Contains the vehicle specific decals for an original appearance.Contents:1 set

€49.90*

Average rating of 0 out of 5 stars

3262/01 FG Vehicle decals set CAT-Truck
Genuine FG spare/option part.Contains the stickers of the headlights, the rear lights and the radiator grill.Not included are the advertising labels for the original design. Please order separate.Dimensions:435 x 145 mmContents:1 piece

€16.10*

Average rating of 0 out of 5 stars

3438 FG Body detailing kit Truck
Genuine FG spare/option part.Contents:1 set

€19.90*

Average rating of 0 out of 5 stars

4152/01 FG Audi A4 DTM flaps
Genuine FG spare/option part. The set includes two pieces of white flaps with screws.Fits body shells 4149 and 4149_01.Contents:1 set

€12.90*

Average rating of 0 out of 5 stars

4411/13 FG ball bearing set for 1/5 2WD, sealed, 14 pcs.
Genuine FG spare/option part.Fits too WB535 cars.Content:2 pieces: 10 x 19 x 7 mm2 pieces: 10 x 22 x 6 mm8 pieces: 8 x 22 x 7 mm2 pieces: 12 x 28 x 8 mm

€51.70*

Average rating of 0 out of 5 stars

4404/07 FG Axially alloy upright 09, displaced, right
Genuine FG spare/option part.Contents:1 piece

€55.70*

Average rating of 0 out of 5 stars

4170 FG Main part Audi R8 clear
Genuine FG spare/option part. Contents:1 piece

€143.95*

Average rating of 0 out of 5 stars

3280/01 FG Body Set FG Team Truck 4WD
Genuine FG spare/option part.Contents:1 piecePainting tips:

€158.50*

Average rating of 0 out of 5 stars

4402 FG Alloy steering stop for alloy uprights
Genuine FG spare/option part. A buckling of the inner front wheel in curves becomes impossible when mounting the alloy steering stop.Suitable for 6103/05, 6103/06, 4403, 4403/01, 4404 and 4406.Dimensions:Length: 24 mmDiameter: 7 mmThread: M4 Contents:2 pieces

€13.20*

Average rating of 0 out of 5 stars

4153/01 FG Vehicle decals Audi A4 DTM
Genuine FG spare/option part. Contains the vehicle specific decals for an original appearance.Dimensions:500 x 350 mm230 x 75 mmContents:1 set

€39.50*

Average rating of 0 out of 5 stars

4152 FG Audi A4 DTM wing
Genuine FG spare/option part.The set includes rear wing. Fits body shells 4149 and 4149/01.Contents:1 setPainting tips:

€58.30*

Customers also viewed

Average rating of 0 out of 5 stars

3253 FG Body set Street Truck
Genuine FG spare/option part. Former: "MB 1834" Truck. The set contains the main body, the driver's cab, the driver's cab side parts and the body screws.The rear bumper won't be delivered and has to be ordered separate. The set is delivered not painted.Dimensions:Length: 870mmWidth: 435mmHeight: 390mmWheelbase: 535mmContents:1 setPainting tips:

€292.50*

Average rating of 0 out of 5 stars

FG Challenge Line 2WD-530E Elektro with FG Street Truck body
These FG 2WD 1/5 models are now available with a high-torque brushless engine. Surface conditions with maximum grip assumed speeds above 100 km/h can be reached and steered controlled. E stands for electric power which is equivalent to extremely high torque, high speed and all this without any engine noise. The Sportsline models are equipped with a powerful brushless engine and a speed control. This control can be regulated simply via transmitter or optionally via the program card. The body shell is clear.You can select the car with complete RTR-equipment from the options menu. RTR equipment RTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed. The controller can be easily adjusted via the transmitter or optionally via a programming card. The LiPo batteries and a suitable charger are also required. We recommend using LiPo batteries with a maximum length of 150mm and a width of 50mm to ensure trouble-free installation. The model is supplied with the EC8 connector system.

€999.90*

Average rating of 0 out of 5 stars

FG Sportsline Truck 4WD-530 with FG Super Street Truck body shell clear
After the successful introduction of the 4WD Sportsline chassis for 1:5 FG Touring and Sports cars this chassis is now available also for Race Trucks. Mainly rookies benefit from the advantages of an all-wheel drive. Traction also on dusty asphalt, therefore no pulling of the rear section, all around just pure driving fun. These are just some advantages of the four-wheel drive.You can select the car with complete RTR-equipment from the options menu. RTR-equipment RTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed. Transmitter 2,4 GHzReceiverHigh power servo for throttle and brakeLargescale servo for steeringTx-battery, rx-battery The body shell is clear.The Race Truck chassis is equipped with a double wishbone suspension, toe-in, camber and castor can be adjusted. The robust all-wheel drive gives the vehicle a neutral driving performance on almost every surface. We set big value on durability using strong materials as well as operator convenience. The FG Sportsline class is the affordable, but still high-quality entry into the RC car sport.Technical description:Equipped with a powerful 26 cm³ engine, Tuning pipe, tank with snap closure, 2 differential gears, front disk brake and a lot more. Highlight however remains the approved FG all-wheel drive. Maximal traction as well as simple handling, grip in curves - these are the advantages only a four-wheel drive can offer. With a wheelbase from 530 mm.Dimensions:Length: 880 mmWidth: 435 mmHeight: 380 mmWheelbase: 530 mm Trucks in action!

€1,249.95*

Average rating of 0 out of 5 stars

8064 FG Roll cage set for BMW E30
Genuine FG spare/option part. Suitable for BMW E30.For the assembly the mounts FG no. 5013 and 8013 are required.Contents:1 set

€59.00*

Average rating of 0 out of 5 stars

7343/13 FG NGK Iridium Spark Plug CR8 for CY / Zenoah G230/240/260/270/290/320
Genuine FG spare/option part.The NGK Iridium high-tech spark plug allows for better smoothness, enhanced acceleration, reduced emissions and leads to a reduction in fuel consumption.In the model sports the high-tech metal iridium guarantees top performance.The iridium spark plug has several advantages. Its center electrode from the precious metal iridium is only 0.6 mm thin and very tough. Because the melting point of iridium is over 2400 ° C, it is extremely durable.Thread size M10 x 1Applications:Chung YangZenoah G230/240/260/270/290Contents:1 piece

€24.90*

Average rating of 0 out of 5 stars

FG Formula 1 Sportsline
Completely mounted, with a 26 cm³ combustion engine and final speed of almost 100 km per hour, what else would you want?A further additional improvement is the installed front disk brake. A clear polycarbonate bodyshell is included.Quality and high-class equipment to a sensible price.Technical description of the Formula 1 Sportsline chassis:The undercarriage of the FG Formula 1 is built on a high-strength 5 mm alloy chassis. All chassis borings (screws) are countersunk. The front and rear axle with their various adjusting possibilities as king pin angle, trailing effect etc. consist of double delta wishbones. The double delta wishbones of the rear axle are supported by additional track rods which enable you a very fast set-up. All adjustments can be made without a dismounting of parts according to the fixed wishbone threaded rods with right-/left-handed thread.The model is equipped with 4 alloy oil-pressure shock absorbers. The push-rod suspension ensures the transmission between single wheel suspension and shock absorber.We deliver this chassis with a powerful 26 cc combustion engine. The engine's power is transmitted over a four-block Teflon clutch on a synchronous belt drive. This synchronous belt drive is also designed for a higher driving power. The BBS wheels and the tires are copies of the big models. All rotating parts are supported by ball bearings.The construction of the Formula 1 chassis is not identical with the other 1:5 scale FG models such as Merc. C-Class, Race Truck a.s.o. and therefore it can?t be converted into or from these models by a conversion kit.You can select the car with complete RTR-equipment from the options menu. RTR-equipment RTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed. Transmitter 2,4 GHzReceiverHigh power servo for throttle and brakeLargescale servo for steeringTx-battery, rx-battery Dimensions:Length: 960 mmWidth: 440 mmHeight: 230 mmWheelbase: 620 mmFormular 1 models in action!

€1,279.00*

Average rating of 0 out of 5 stars

3258 FG Rear bumper 1834/Atego
Original FG Ersatz-/Tuningteil.Suitable for 1834 and Atego body shells. Bumper is delivered not painted but inclusive the mounts.Inhalt:1 StückPainting tips:

€47.90*
Loading...
Upload in progress, please be patient ...
Shopware-Plugin Development Shopware-Plugin Development