32401 Servo mount - 1pce.

Genuine FG spare/option part. Radio plate suitable for all FG 1:6 2WD Off-Road models except Leopard. Vintage version.Contents:1 piece

Alternatives:Set 1:FG 5014FG 5014/05FG 5014/07When using a stock steering servo you will also need FG 6118/02. When using a stock throttle/brake servo the cutout for the servo has to be enlarged for about 3 mm. For standard size throttle/brake servos (i.e. Hitec HS645MG) mounting frame FG 5014/04 is required.Set 2:y0112FG 5014/05FG 5014/07When using a stock throttle/brake servo the cutout for the servo has to be enlarged for about 3 mm. For standard size throttle/brake servos (i.e. Hitec HS645MG) mounting frame FG 5014/04 is required.

Genuine rc-car-online spare/option part.The optimal parking lot or race tires for your FG Racetruck an Offroad models with 18 mm Square mount.- On race trucks, the rim extension rings for the rear tyres must be glued on the inside. - On off-road models, the rim extension rings for the rear tyres are glued on the outside.Type Width Outer diameterFront 64 mm 153 mmRear 78 mm 153 mmGlued on original FG-Racetruck rims (rear tire with extension to the inside), incl. foam rubber insert,FG rim with 18 mm square drive and reinforcement ring.Attention: From experience we warn against using rims and extensions from another manufacturer.Since the Mammoth tires provide a very good grip, the rim and bonding are extremely stressed. Due to the high torque load in relation to the bonding of tires on large models, an occasional check in this regard and possibly a repair of the bonding (y0067) is inevitable.As a recommendation:The dirtier the track or the colder the temperature, the softer the rear tire should be.Reference for the front tire: With 2WD models this should be one to two stages harder than the used rear tire. On 4WD models, a tire combination with the same shore hardness front and rear is often good to drive.Of course, with Mammoth Supergrip Racetruck tires, the softer the tire, the higher the wear.The Mammoth Supergrip Racetruck tires have a special onroad tread. Whereby these still have an optimal grip after the wear of the tread, and can still be driven for a long time.

Genuine HT spare/option part. Universal radio plate for FG 4WD Marder; Off-Road Buggy; Beetle and all 4WD Monster and Stadium Modelle. Optional for one or two servos.With drilling templates for up to two of the following steering servos:Big Scale Servo:Orange PowerHitec Servos:HS-805BB/MGHS-5745HS-5755FG Servos:65956596/li>Multiplex Servos:Jumbo´sRhinoCarson Servos:Mega EvoMega Evo ProAnd for all servos with the from 59x29x55 mm, 66x30x70mm. Parts like servos and decoration are not included! Spacers for throttle/brake servo (standard size) and rx-box are included.Delivery contents:Servo plateMountin boltsSpacerScrews and mounting materialThe surface is plain aluminum. With the necessary effort it can be polished to a high luster.

Diameter: 123 mmWidth: 65 mmDue to the high torque load on the bonding of tires on largescale cars, checking the bonding from time to time and re-glueing (y0067) if necessary is unavoidable.Rims with 18 mm square drive (fits FG, Harm, RS5, Carson, Smartech a.s.o.).Contents:1 pair (2 pieces)