305196H, A-arm, rear lower Gas Devil, reinforced, 2 pcs.

€9.00*

% €18.00* (50% saved)

Prices incl. VAT plus shipping costs

Available

Product number: cs_305196h

EAN: 4058575020288

Product information "305196H, A-arm, rear lower Gas Devil, reinforced, 2 pcs."

Reinforced stiffer plastic compound

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

No reviews found. Share your insights with others.

Customers also bought

305192H, A-arm, front upper Gas Devil, reinforced, 2 pcs.

Reinforced stiffer plastic compound

€7.40* €14.80* (50% saved)

305195H, A-arm, front lower Gas Devil, reinforced, 2 pcs.

Reinforced stiffer plastic compound

€9.20* €18.40* (50% saved)

y1404/01 MadMax GIANT GRIP tires for FG/Smartech and other (18 mm square drive)

GIANT GRIP 190 x 70 with black colored MadMax Extreme rims, 20-fold screwed, very tough, with 18 mm square drive and reinforced beadlock rings for FG, Smartech and many more.The GIANT GRIP provides giant traction through 96 about one cm² wide and 5 mm high strong lugs, getting ample grip even on loose surfaces like sand and soil.Due to the extreme strain caused by the GIANT GRIP tires the MadMax rim with reinforcement ring had to be optimized once more.The GIANT GRIP tires come with strong special tire inserts which allow to transfer the power without canting, even on heavy cars.Dimensions:Outer diameter: 190 mmTire width at bead 70 mmTread width 80 mmReinforced 18 mm square wheel driveThe MadMax Giant Grip tires use 60 mm wide rims ( y1415/01 or y0761/01).The video shows the 18 mm square drive version. Also available with 24 mm hex. Some off-road tires knowledge can be found here!

From €64.90*

Details

305158, Shocks repair kit Gas Devil

€19.95* €39.90* (50% saved)

2018/01 HPI Receiver battery pack "Hump" 6V / 4500 mAh Ni-MH

Fits all HPI 1/5 scale cars. With BEC connector.

€54.10*

LOSB3234 Losi Alloy Brake disk for 5ive-T and Mini

Genuine Losi spare/option part. Fits Losi 5ive-T and 5ive Mini. Content:2 pieces

€23.99*

Similar products

y1218 Springs for drive shafts

Genuine HT spare/option part. The best solution for drive shaft positioning, can be used with ball drives or regular "dog bones" as well.The springs will be simply inserted into the drive cups.DImensions:Diameter: 11 mmHeight: 8 mmContents:4 piece

€4.90*

HT Aluminum differential case conversion kit Carson Gas/Hell Devil/CRT 4x4/Thunderbolt, y0928, set

Alloy case conversion kit for Carson Gas Devil 4x4 (Smartech Titan) only, can be used for all differentials.Comes complete as shown with sealed bearings, installed needle bearings, shims, screws and o-rings.

€89.90*

s054302, Smartech aluminum shock tower rear Carson Gas Devil + CRT 4x4, Conrad Hell Devil, Smartech Titan - 1 pce.

Machined alloy version replaces the stock stamped part, 5 mm high strength alloy.

€79.90*

y0943 HT-Alloy a-arm for Carson Gas Devil + CRT 4x4, Conrad Hell Devil, Smartech Titan

Genuine HT spare/option part. Complete set set of all alloy a-arms, one pair of each version.Contents:1 set

€159.90*

305191 / s054045 Bevel gear 16T center Carson / Smartech 4x4

Genuine Smartech spare/option part.Module: m=1,5.Content:1 piece

€13.95* €27.90* (50% saved)

HT-Steel pinion for Carson / Smartech 4WD cars

ritzel_gas_devil Size: y0344 - 40 teeth

Genuine HT spare/option part. Nitrited steel gears, fit Carson Gas Devil / Smartech Thunderbolt 4x4 only.These gears are available with 37T or 40T, both share the same diameter and must be used in combination.Please note: the gears cannot be used in combination with the stock gears and the 37T version is no replacement for the stock 37T gear!This gives you the following new gear ratios:I=10.58I=9.79 (when using two identical gears !)I=9.06The stock gear ratio is I=11.38 and I=8.42 is possible by switching the gears.Module: m=1,5Profile regraded, this means that the number of teeth is changed while the diameter remained constant. The part of the involutes? curve that defines the tooth profile is changed. Positively regraded (lower number of teeth) pinions are stronger and run smoother, the reduced strength of negatively regraded pinions doesn?t really matter.Contents:1 piece

€44.90*

y0621 Ball bearing , 15x24x5 mm, 2 pcs.

y0621 Ball bearing for alloy diff fit on Mecatech FW01 and no. y0928, 15x24x5 mm, 2 pcs.The ball bearings fit for the alloy differntial conversion kit for Gas/Hell Devil/CRT 4x4/Thunderbolt with the order no. .Measures: 15 x 24 x 5 mm

€24.90*

s054314, universal drive shafts for Carson Gas Devil + CRT 4x4, Conrad Hell Devil, Smartech Titan

Cardan drive shafts fits on Carson Gas Devil + CRT 4x4, Conrad Hell Devil and Smartech Titan on front or rear axle. Does not fit Thunderbolt!Universal joint diameter: 18 mmLength over all: 190 mmDistance between joints, center/center: 119 mmBall diameter: 10 mmAxle shaft diameter x length: 8 mm x 53 mm

€79.90*

305177, s054026, Bevel gear center diff 57T Carson / Smartech 4x4, 1 pce.

Module: m=1,5

€17.45* €34.90* (50% saved)

y0968 HT-Steel pinion 34 teeth Speedgear for Carson / Smartech 4WD cars

Genuine HT spare/option part. Nitrited steel spur gear, profile regraded, for combination with the stock 43T spur gear which goes on the clutch bell. This gives a numerically lower drive ratio and makes it possible to use standard diameter buggy tires on this car!Attention: The speedgear has the same diameter as the stock 37T gear and is therefore not compatible with the other 37T/40T HT tuning gears!Speedgear 34T: I=7,74Module: m=1,5Profile regraded, this means that the number of teeth is changed while the diameter remained constant. The part of the involutes? curve that defines the tooth profile is changed. Positively regraded (lower number of teeth) pinions are stronger and run smoother, the reduced strength of negatively regraded pinions doesn´t really matter.Contents:1 piece

€44.90*

305167 / s054013 Spur gear 43T Carson / Smartech 4x4

Genuine Smartech spare/option part.Module: m=1,5.Content:1 piece

€13.95* €27.90* (50% saved)

y0942 HT-Alloy a-arm for Carson Gas Devil / Smartech Titan, rear upper

Genuine HT spare/option part. Rear lower a-arm, replaceable plastic bushings, one version, identical for l/h and r/h applications. Surface deburred with vibratory grinder.Contents:1 piece

€39.90*