305041 Lexan body shell for Comanche - incl. Dekor 1pce.

€99.90*

Available

Product number: cs_305041

EAN: 4058575007982

Product information "305041 Lexan body shell for Comanche - incl. Dekor 1pce."

Lexan body shell, unpainted with clear windshield.
This is not the stock ABS body shell!

Length 625 mm
Width 255 mm
Height 180 mm

Painting tips:

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

No reviews found. Share your insights with others.

Accessories / Spare parts

y0543 Schneider Permanent Marker

Genuine HT spare/option part. Schneider permanent marker, cap with clip and bullet tip. Dries quickly, water and wipe proof, black color.Recommended for marking and contour tracing on body shells.Lines can be easily removed with isopropyl alcohol or dry-cleaning naphtha.Contents:1 piecePainting tips:

€2.90*

y0544 Sanding fleece Gold Microfine Pads, 100 x 80 mm

Genuine HT spare/option part. Perfect surface preparation for paint jobs.Metal-free grinding fleece with a 1000, 1200 or a 1500 grit to roughen the inside of the body shell to improve paint adhesion. The flexible carrier of the fleece allows for a consistent, uniform contact with the work surface and makes it possible to prepare the polycarbonate to the smallest corner.Use it dry or wet when you rinse the body shell. The 1,500 grit (y0544//03) is especially recommended for metallic paint.Contents:5 pieces PadsPainting tips:

€4.90*

Details

Tamiya Lexan spray paint

TAMIYA PS = Polycarbonate spray paints are specially developed for painting unpainted kit body shells. Numerous colour shades are available and allow the individual design of models. Each can contains 100 ml of highly opaque paint, which is oil and fuel resistant, allowing the use on nitro models.The body shell should be degreased and cleaned before use. Best painting results are achieved when thin layers of paint are sprayed on from a distance of approx. 30 cm. Between two spraying processes the paint should dry slightly to avoid "tears".Always follow the painting instructions of models and on the can. Danger warnings: H222 Extremely flammable aerosol. H229 Container is under pressure: may burst when heated. H315 Causes skin irritation. H318 Causes severe eye damage. H335 May cause respiratory irritation. H336 May cause drowsiness and dizziness. EUH066 Repeated exposure may cause skin dryness or cracking. Content: 100 ml spray can with spray headPainting tips:

Content: 100 Milliliter (€97.90* / 1000 Milliliter)

Variants from €9.01*

€9.79*

Details

y0032 Masking tape

Genuine HT spare/option part.For masking of windows or various other locations in body shells that are not to be painted.Also ideally suited for templating patterns or shapes that are to be incorporated into the body to be painted .Contents:1 piece / 50 meters

Content: 5000 Zentimeter (€0.08* / 100 Zentimeter)

€3.90*

Details

y0031 Edge tape

Genuine HT spare/option part.Ideal fo masking fine lines or patterns. Also suitable to get cleaner and more precise edges when masking large areas.Contents:1 piece / 33 meters

Content: 1000 Zentimeter (€0.80* / 100 Zentimeter)

€7.95*

Details

y0833 Lexan Scissors

Genuine HT spare/option part. Scissors for cutting and detailing of Lexan bodies. Slim design makes preparing small holes easier. Slightly curved blades for smooth radius cutting (wheel housings for example).Contents:1 piece

€19.90*

Details

y0565 RC-Tech Flexa Fix body shell glue

Genuine HT spare/option part. For all epoxy models, plastic and polycarbonate/lexan body repairs!Direction of use:Use a brush or other applicator. Apply enough Flexa Fix to the damaged area. Be careful not to apply too much in one go as it can be difficult to manipulate. If necessary apply two or three coats to build up the joint area. Use epoxy blanket of pieces of polycarbonate (Lexan) to re-enforce if necessary.You can also use the Flexa Fix to re-enforce the body corners (let the pure product leak into the corners) or to make flexible battery packs.Contents:1 piece / 100 ml

Content: 100 Milliliter (€109.00* / 1000 Milliliter)

€10.90*

7058 FG Body screws with stop nuts, 15 pieces

Genuine FG spare/option part.Part is delivered in silver or black color from vendor!Set includes:15 x Allen head body screws M3 x 10 mm15 x Washers15 x M3 Hexagon nut

€6.60*

7058/01 FG Body screws Torx with stop nuts, 15 pieces

Genuine FG spare/option part.Part is delivered in silver or black color from vendor!Set includes:15 x Torx body screws M3 x 10 mm15 x Washers15 x M3 Hexagon nut

€6.90*

Customers also viewed

y3060/01 Vehicle decals Street truck

Decal set for FG Street truck.Dimensions:470 x 250 mm

€29.90*

66256/01 FG Plastic gilmer belt pulley front 40T. 4WD

Genuine FG spare/option part. Gilmer belt pulley with 40 teeth for the front axle of FG 4WD models. Improves the propulsion of the front axle through increased rpm.Content:1 piece

€23.90*

10000E FG Formel 1 Sportsline Electric

The FG Sportsline Formula 1 electric convinces not only by its appearance, but rather by its technical achievements. The unique details such as push rods, horizontal oil pressure shock absorbers, double wishbone and much more can be found in almost no other model.The chassis is built on a high-strength 5mm aluminum chassis plate and thus offers extreme stability. Countersunk holes in the chassis plate allow the screws to be flush, ensuring a flat surface under the model. Versatile adjustment options on the front and rear axles allow the model to be perfectly adapted to your own needs. Adjustments such as camber, caster, etc. are no problem whatsoever, even for beginners, and are made via the double a-arms, which provide maximum stability at the rear axle by means of additional track rods. Also the adjustable aluminum oil filled shock absorbers convince on full length and offer maximum performance even on a very difficult underground. The above mentioned push-rod suspension enables play-free power transfer from the suspension to the shock absorbers, which is essential for precise driving.The factory-mounted combination of 980KV motor and 160A MAX6 esc provides performance that is second to none. With a 6S 22.2V (4S 14.8V is also possible) LiPo batteries, the motor reaches a final speed of about 25,000 rpm, leaving a comparable combustion engine far behind. The braking is done by the 980KV motor and is very strong. Within a few meters the model comes from top speed to a standstill. Those who have searched in vain for reverse gear with a combustion engine will find it with the electric version. The operation is very easy, if you press the brake lever once, you hit the brakes. If you press the brake lever twice, you shift into reverse. With the help of a programming card (available separately) you can adjust all ESC values according to your needs. This includes setting options for power, brake force, low-voltage protection and much more. Furthermore, the model has the following technical: Features: 160A MAX6 esc, 6S compatible (4S also possible) 980KV brushless motor Waterproof components Adjustable aluminum oil filled shock absorbers Aluminum levers for the shocks Aerodynamic Lexan body shell 5mm thick aluminum chassis plate Mounting compartment for steering servo Mounting compartment for separate brake servo (for mechanical/hydraulic brakes) Cogged belt drive Side battery mounts for optimal weight distribution Custom CNC machined motor mount Unique double a-arms Push rod suspension Treaded F1 tires Tuning ball drive shafts Dimensions: Length: 960 mm BrWidtheite: 440 mm Height: 230 mm Wheelbase: 620 mm Technical data 980KV brushless motor: Max. Voltage: 33V Max. Current: 130A Max. Speed: 30.000RPM Power in watts: 4250W Rotor poles: 4 No-load current: 2.8A Resistance: 0.0128 Length: 82mm Diameter: 55 / 58mm with fins Weight: 880g Shaft diameter: 8mm Free shaft length: 30mm Weight: 880g Technical data Max6 esc: Continuous current: 160A Peak current: 1050A Battery: 3S - 8S LiPo or 9-24 cells NiMH BEC: 6V/7,2V - 3A/6A Abmessungen:70x56x46,5mm Weight: 240g Note: In our online shop you can also find a detailed 360° illustration, where especially the technology of the FG Formula1 electric chassis can be seen.Note battery mounting:When mounting the l/h side LiPo battery, you must always make sure that it does not rub against the drive pulley. For this purpose, a 5 mm thick piece of foam mat or something similar between battery and battery holder is sufficient to ensure an appropriate distance. For driving you still need: 2 drive batteries incl. charger Battery dimensions maximum: Length 143 mm/5,6 Width 48 mm/1,9 Height 40 mm/1,6 Connector EC8 The RTR equipment (remote control and steering servo!) The body shell comes unpainted! In our online store you can use our store configurator (shopping cart selection / options menu) to add the desired parts, as well as the completely painted body. Here at our Ebay offer selectable: RTR equipment (remote control and steering servo) fully assembled! Painted body shell incl. decals Formular 1 models in action!

€1,348.95*

Configure now

15403 Original HPI Fuelie 26 cm³ engine

OEM engine from HPI Baja 5SS and 5T.Get more power and torque out of your Baja with the Fuelie 26S engine! Get the edge on your racing buddies with a complete engine upgrade. Content:1 pieces

€249.90*

6031 FG Roll cage, front loop

Genuine FG spare/option part. Front loop for roll cage, fits all FG off road cars except Leopard / Leopard race.Dimensions:Height 205 mmWidth 128 mmDiameter 10.6 mmContent:1 piece

€21.90*

6227/07, FG Monster Truck tires S/ glued, 2 pcs.

These Monster tires have a bigger square depth, this reduces a cylindrical turning of the square wheel significantly. To mount these tires you need a 18 mm wide square wheel driver. Due to the high torque load on the bonding of tires on largescale cars, checking the bonding from time to time and re-glueing (y0067) if necessary is unavoidable.Durchmesser x Breite / diameter x width 210 x 115 mmAlso suitable for:With the following wheel adapter: y1183 Rim adapter

€115.95*