y0544 Sanding fleece Gold Microfine Pads, 100 x 80 mm
€4.90
Available
Product information "y0544 Sanding fleece Gold Microfine Pads, 100 x 80 mm"
Perfect surface preparation for paint jobs.
Metal-free grinding fleece with a 1000, 1200 or a 1500 grit to roughen the inside of the body shell to improve paint adhesion.
The flexible carrier of the fleece allows for a consistent, uniform contact with the work surface and makes it possible to prepare the polycarbonate to the smallest corner.
Use it dry or wet when you rinse the body shell. The 1,500 grit (y0544//03) is especially recommended for metallic paint.
Contents:
- 5 pieces Pads
Login
Accessories / Spare parts
Genuine HT spare/option part. Schneider permanent marker, cap with clip and bullet tip. Dries quickly, water and wipe proof, black color.Recommended for marking and contour tracing on body shells.Lines can be easily removed with isopropyl alcohol or dry-cleaning naphtha.Contents:1 piecePainting tips:
Customers also bought
Spare part for .Length: 107 mmWidth: 410 mmHeight: 50 mm
Freaking expensive, but it is damned fine.ASONIC HQ 72-102 is a synthetic high-temperature lubricating grease, for use in limited slip differentials. Due to the careful selection of product components and the clean manufacturing environment, ASONIC HQ 72-102 is a rolling bearing grease with a particularly low noise level.Benefits for your application:High-temperature lubricating grease for rolling bearingsHigh purityLow noiseGood water resistanceContent:1 piece, tube with 30g
Content: 30 Gramm (€730.00 / 1000 Gramm)
Alternativ: y0673 Carbon fastening strip for FG no. 8418 - 1 pce. Spare part for .
Item N° 7112O-ring for Racing fixing kit, 4 pce.Replacement o-ring for Samba order number: 7110, Installation kit for 50 mm pipes, set Thickness: 2,5 mmDiameter: 45 mm
Genuine FG spare/option part. Spare part for 4493 and 4494. Thick: 3 mm.Contents:4 pieces
Customers also viewed
Suitable for Opel Calibra 93 and ITC, Chrysler Viper and Evo chassis.
These cask shaped springs are especially designed to fit the diameters of Mecatech Klick-Shocks and Mecatech Big Bore shocks.Dimensions:Inner diameter, upper: 20,5 mmInner diameter, lower: 16,5 mmOutside diameter: 29,5 mmLength: 52,5 mmWire diameter: 2,7 mm
TAMIYA PS = Polycarbonate spray paints are specially developed for painting unpainted kit body shells. Numerous colour shades are available and allow the individual design of models. Each can contains 100 ml of highly opaque paint, which is oil and fuel resistant, allowing the use on nitro models.The body shell should be degreased and cleaned before use. Best painting results are achieved when thin layers of paint are sprayed on from a distance of approx. 30 cm. Between two spraying processes the paint should dry slightly to avoid "tears".Always follow the painting instructions of models and on the can. Danger warnings: H222 Extremely flammable aerosol. H229 Container is under pressure: may burst when heated. H315 Causes skin irritation. H318 Causes severe eye damage. H335 May cause respiratory irritation. H336 May cause drowsiness and dizziness. EUH066 Repeated exposure may cause skin dryness or cracking. Content: 100 ml spray can with spray headPainting tips:
Content: 100 Milliliter (€140.50 / 1000 Milliliter)
Genuine HT spare/option part. Schneider permanent marker, cap with clip and bullet tip. Dries quickly, water and wipe proof, black color.Recommended for marking and contour tracing on body shells.Lines can be easily removed with isopropyl alcohol or dry-cleaning naphtha.Contents:1 piecePainting tips:
This paint will be applied to the outside of the body shell to get the flat appearance.TAMIYA PS = Polycarbonate spray paints are specially developed for painting unpainted kit body shells. Numerous colour shades are available and allow the individual design of models. Each can contains 100 ml of highly opaque paint, which is oil and fuel resistant, allowing the use on nitro models.The body shell should be degreased and cleaned before use. Best painting results are achieved when thin layers of paint are sprayed on from a distance of approx. 30 cm. Between two spraying processes the paint should dry slightly to avoid "tears".Always follow the painting instructions of models and on the can. Danger warnings: H222 Extremely flammable aerosol. H229 Container is under pressure: may burst when heated. H315 Causes skin irritation. H318 Causes severe eye damage. H335 May cause respiratory irritation. H336 May cause drowsiness and dizziness. EUH066 Repeated exposure may cause skin dryness or cracking. Content: 100 ml spray can with spray headPainting tips:
Content: 100 Milliliter (€115.50 / 1000 Milliliter)
Fits most spray cans from many manufacturers.Convert your spray can into a spray gun. The long-lever system of this handle makes using a spray can much more convenient and provides better flow rate control as well.No more dirty hands from paint work.Contents:1 piece