Skip to main content
EXTRA 20% off Outlet*. Use Code: EXTRA20 at checkout!!
+49 2151 820200 Mon-Fri 9 am - 6 pm, Sa 9 am - 1 pm

2012-286 Mecatech Double servo radioplate for short chassis

Product information "2012-286 Mecatech Double servo radioplate for short chassis"

Genuine Mecatech spare/option part.

Contents:
  • 1 piece

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Customers also bought

Average rating of 0 out of 5 stars

2012-288 Mecatech Receiver box For Short Chassis
Genuine Mecatech spare/option part. Contents:1 piece

€74.00*
%

Average rating of 0 out of 5 stars

y19751 Tire Tread Cutter
The tire tread cutter is required for re-cutting worn-out or creating new tread designs in order to get more grip. Cutting depth is adjustable and cutting width is approx. 3 mm.Please note: This tool is designed for cutting model tires only, not for any fullsize vehicle tires!Content:1 pieces

€79.90* €89.90* (11.12% saved)

Average rating of 0 out of 5 stars

y19752 Tire tread cutter spare Blades, 5pcs.
Even though the blade will keep its edge for a long time, no cutting tool will last forever. Spare blades are available of course.Cutting width approx. 3 mmPack of 5

€9.90*

Average rating of 0 out of 5 stars

2009-33 Mecatech Klick-Shock nut
Genuine Mecatech spare/option part. Contents:2 pieces

€2.50*

Average rating of 0 out of 5 stars

y1588 Aluminum receiver antenna mount
Genuine rc-car-online spare/option part. Versatile aluminum bracket for easy installation in panels or RC boxes with up to 4 mm wall thickness. Only a 6 mm hole is required and the bracket is fastened with the included nut. Alternatively, for installation in thicker material an M6 thread can be tapped as well. An O-ring provides a seal when installed in RC boxes.The bracket has a stepped hole into which the common antenna tubes of about 3.2/3.3 mm diameter can be inserted, but not pushed through. The hole for the antenna cable has a diameter of approx. 2.5 mm.The height of the bracket above the mounting surface is 16 mm.The scope of delivery includes an end cap and two antenna tubes with a length of approx. 170 mm.Contents:1 set

€9.90*

Average rating of 0 out of 5 stars

y1474 Aluminum foil tape, self-adhesive, 50 mm x 45 meters
Genuine HT spare/option part.50 mm wide, self-adhesive aluminum foil tape, especially for heat insulation; i.e. between tuned pipe and plastic or electronic components.Content:1 piece / 45 meters

€9.90*

Similar products

Average rating of 0 out of 5 stars

y1218 Springs for drive shafts
Genuine HT spare/option part. The best solution for drive shaft positioning, can be used with ball drives or regular "dog bones" as well.The springs will be simply inserted into the drive cups.DImensions:Diameter: 11 mmHeight: 8 mmContents:4 piece

€4.90*

Average rating of 0 out of 5 stars

y1004 Driveshaft boots for ball drive + dogbones
Genuine HT spare/option part. Protect ball drive as well as cardan drive against dirt. For FG and Carson ball drives, fits standard dogbones as well.Contents:2 pieces

€8.90*

Average rating of 0 out of 5 stars

2012-289 Mecatech Right left threaded rod 45 mm
Genuine Mecatech spare/option part. Contents:1 piece

€12.15*

Average rating of 0 out of 5 stars

2012/504 Throttle/brake servo horn dedicated to Mecatech FW01 and FG Evolution
Throttle/brake servo horn dedicated to Mecatech FW01 and FG Evolution.Suitable for all servos with an output shaft with 25T spline shaft, for example:y2006 Digital Big-Scale Servo D-21HVNearly all Robbe/Futaba servosMega Power servoThunder Tiger DS1015Savöx servosand many more!Content:1 x y0700 Double sided alloy servo horn1 x y0700/01 Single-sided alloy servo horn2 x 1018/05 Spacer bushing 5 x 20 mm for throttle linkage Evo 08/510 (one spacer drilled to 3 mm inner diameter)1 x M3 x 30 mm Screw2 x M3 x 12 mm Nut

€27.90*

Average rating of 0 out of 5 stars

2012-274 Mecatech Car Bag
Genuine Mecatech spare/option part. Very tough car bag with hardcase shape. All side panels are reinforced with a solid plastic tub.Dimensions:Length: 93 cmHeight: 30 cmWidth: 45 cmContents:1 piece

€139.00*

Average rating of 0 out of 5 stars

2012-276 Mecatech Accessories bag
Genuine Mecatech spare/option part. Dimensions:Length: 66 cmHeight: 35 cmWidth: 35 cmContents:1 piece

€99.50*

Average rating of 0 out of 5 stars

2012/502 Brake linkage set dedicated to Mecatech FW01 and FG Evolution
2012/502 Brake linkage set dedicated to Mecatech FW01 and FG Evolution.Content:1018/01 Throttle linkage Evo 09 / Comp. 071 x 6534/02 Throttle pivot post for 2 mm linkages 1 x 1018/05 Spacer bushing 5 x 20 mm for throttle linkage Evo 08/5101 x Screw M3 x 18 mm2 x Nut M3

€17.90*

Average rating of 0 out of 5 stars

2012/501 Throttle linkage dedicated to Mecatech FW01 and FG Evolution
Throttle linkage dedicated to Mecatech FW01 and FG Evolution.Set includes:1 x 1018/01 Throttle linkage Evo 09 / Comp. 071 x 6534/02 Throttle pivot post for 2 mm linkages1 x Screw M3 x 20 mm2 x Nut M3

€16.90*

Average rating of 0 out of 5 stars

2012/500 Linkage set dedicated to Mecatech FW01, complete
Complete set for steering, throttle and brake linkagesSet includes:3 x 6534/02 Throttle pivot post for 2 mm linkages 1 x y0132 y0132 Linkage rod for MecaTech brakes1 x 1213/10 Steel ball 7 x 6,5 mm1 x 66244, Ball joint 7mm M41 x 1213/11 Steering linkage l./r., M4 x 42mm1 x 6020 Set collar 2,1mm1 x 1018/01 Throttle linkage Evo 09 / Comp. 077 x Nut M32 x Screw M3 x 16 mm3 x Screw M3 x 18 mm 2012/501 Throttle linkage 2012/502 Brake linkage set 2012/503 Steering servo linkage set 2012/504 Throttle/brake servo horn The Servo arm is suitable for all servos with an output shaft with 25T spline shaft, for example:y2006 Digital Big-Scale Servo D-21HVNearly all Robbe/Futaba servosMega Power servoThunder Tiger DS1015Savöx servosand many more!

€79.90*

Average rating of 0 out of 5 stars

2012-260 Mecatech Titanium Blade Antiroll Bar 3 mm
Genuine Mecatech spare/option part for the FW01.Contents:2 pieces

€67.00*

Average rating of 0 out of 5 stars

2012-270 Mecatech Side stiffener to allow the front lower engine mount
Genuine Mecatech spare/option part. Spare part for Mecatech 2012-265.Contents:1 piece

€54.00*

Average rating of 0 out of 5 stars

2012-278 Mecatech Additional chassi stiffening brace
Genuine Mecatech spare/option part. Mecatech 2018 tuning part, used by all the drivers during the European Championship 2018. Making the chassis perform even more consistent on tracks with average or high grip conditions.Contents:1 piece

€76.50*

Customers also viewed

Average rating of 0 out of 5 stars

2012-161 Mecatech Radio Plate Double Servo Steering
Genuine Mecatech spare/option part for the FW01.Content:1 piece

€61.00*

Average rating of 0 out of 5 stars

68414 FG Alloy radio plate 4WD, set
Genuine spare/option part.Alloy radio plate 4WD with distance bolts and servo mounting frame Futaba, JR, for steering servo FG 9960MG and MP Rhino digi 4.Suitable for Off-Road Buggy 4WD RTR, Off-Road Beetle 4WD RTR and Monster/Stadium models 4WD RTR.Contents:1 set

€39.95*

Average rating of 0 out of 5 stars

2012-288 Mecatech Receiver box For Short Chassis
Genuine Mecatech spare/option part. Contents:1 piece

€74.00*

Average rating of 0 out of 5 stars

- GWH04-XM1 GRP W04 REVO XM1 Tyres Soft
This pair of Tyres have the following use indications: GOOD GRIP situation for clean track. GOOD GRIP situation for medium asphalt. GOOD GRIP situation for medium temperatures. This pair of Tyres have the following technical features: REVO treated profile for the maximum traction and the maximum lateral grip. Treated profile studied to maintain the tyre surface alway clean from rubber murble. Compound exclusively developped for model tyres. Inside belt flexible but very strong, vulcanized directly together with tyre compound. Insert foam with special material for high temperatures, for maximum stability and high drive precision. Spoked wheel moulded with special material for high temperatures for maximum grip and stability. Special gluing system 100% guaranteed.The main sizes for this tyre are: WHEEL fixing with square 18mm. TYRE outside diameter 118mm. WHEEL inside diameter 90mm. TYRE tota width 65mm. Note:The harder a tire compound - the longer it lasts, but the more moderate the performance.The softer a tire compound - the better the performance, but the lower the durability. Hint!As a rule, the same tires can be used for front and rear.If the vehicle tends to oversteer, this can be avoided by using a harder front tire!In wet conditions you should use a rain tire which offers maximum grip under these circumstances.With the use of Magic Rain, a tire traction compound, the grip can be further improved.Check your tires after driving! It can happen that a tire starts to detach from the rim, in this case you should glue this spot immediately with our tire repair kit (y0067), otherwise the tire could detach completely from the rim.So find out which tire is the best for you!

€38.90*
Loading...
Upload in progress, please be patient ...
Shopware-Agency Shopware-Agency