2012-218 Mecatech Rear Carbon body support (for Porsche bodyshell)

€20.90*

Prices incl. VAT plus shipping costs

No longer available

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Product number: mec_2012_218

EAN: 4058575111665

Product information "2012-218 Mecatech Rear Carbon body support (for Porsche bodyshell)"

Genuine Mecatech spare/option part for the FW01.

Contents:

1 piece

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Similar products

y1218 Springs for drive shafts

Genuine HT spare/option part. The best solution for drive shaft positioning, can be used with ball drives or regular "dog bones" as well.The springs will be simply inserted into the drive cups.DImensions:Diameter: 11 mmHeight: 8 mmContents:4 piece

€4.90*

2012-65 Mecatech Steering and rear antiroll bar plastic joint

Genuine Mecatech spare/option part for the FW01.Content:2 pieces

€5.50*

2012-148 Mecatech Rear Body Mounting

Genuine Mecatech spare/option part for the FW01.Content:1 piece

€9.20*

2012-185 Mecatech Ball for servo saver steering

Genuine Mecatech spare/option part for the FW01.Content:1 piece

€7.50*

y1004 Driveshaft boots for ball drive + dogbones

Genuine HT spare/option part. Protect ball drive as well as cardan drive against dirt. For FG and Carson ball drives, fits standard dogbones as well.Contents:2 pieces

€8.90*

2012-14 Mecatech Front body Mounting

Genuine Mecatech spare/option part for the FW01.Content:1 piece

€9.90*

y1036 HT rose joints with conical spacers

Genuine HT spare/option part. Dimensions:A = 5 mmB = 6 mmC = 8 mmD = 13 mmContents:2 pieces rose joints4 pieces conical spacers

€18.90*

2012-94 Mecatech Clutch Flange Spacer

Genuine Mecatech spare/option part for the FW01.Content:1 piece

€7.50*

2012-106 Mecatech Aluminium Washer for Engine Fastening

Genuine Mecatech spare/option part for the FW01.Content:4 pieces

€8.30*

2012-47 Mecatech Plastic Uniball front Anti-Roll Bar

Genuine Mecatech spare/option part for the FW01.Content:2 pieces

€5.90*

2012/502 Brake linkage set dedicated to Mecatech FW01 and FG Evolution

2012/502 Brake linkage set dedicated to Mecatech FW01 and FG Evolution.Content:1018/01 Throttle linkage Evo 09 / Comp. 071 x 6534/02 Throttle pivot post for 2 mm linkages 1 x 1018/05 Spacer bushing 5 x 20 mm for throttle linkage Evo 08/5101 x Screw M3 x 18 mm2 x Nut M3

€17.90*

2012-96 Mecatech Pinion Retaining Ring

Genuine Mecatech spare/option part for the FW01.Content:1 pieces

€2.20*

Customers also viewed

2012-219 Mecatech Rear plastic column support (for Porsche bodyshell)

Genuine Mecatech spare/option part for the FW01.Contents:1 piece

€14.70*

2009-36 Mecatech Lower shock shaft end long

Genuine Mecatech spare/option part. Contents:2 pieces

€13.50*

Details

FG Sportsline 4WD-510 with Porsche 911 GT3 RSR body

The first 1/5 touring and sports car designed as a 4WD from the ground up. With a wheelbase of 510mm the 4WD chassis is suitable for the FG Mini Cooper and the FG Porsche GT3 RSR bodies. Equipped with a strong 26 cm³ engine, tuning pipe, tank with quick acting closure, 2 differential gears, front disk brake and a lot more. However, the highlight is still the well-known FG 4WD. Maximum traction, easy handling and grip during cornering as well, these are the advantages only a 4WD model can offer.You can select the car with complete RTR-equipment from the options menu. RTR-equipment RTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed. Transmitter 2,4 GHzReceiverHigh power servo for throttle and brakeLargescale servo for steeringTx-battery, rx-battery The RTR version of the car includes servos, transmitter, receiver, rechargeable batteries for transmitter / receiver.The 4WD Sportsline chassis opens up a new era within the Touring and Sportscar class of large scale model cars. Main target was the development of a chassis with supreme driving dynamics and ultimate performance. Maximum traction as well as easy handling, sufficient grip in curves, only a fourwheel powered model offers all these advantages. With the new 4WD Sportsline series FG Modellsport once again sets a trend at 1:5 scale.The 4WD Sportsline chassis for the Porsche 911 GT3 RSR is delivered with a wheelbase of 510mm. The fourwheel drive is carried out over an almost wear resistant tooth belt. 2 differential gears, tank with snap closure and a powerful engine with Tuning pipe turn the Sportsline 4WD chassis into a high-class 1:5 scale model with outstanding driving characteristics.You can choose this 4WD model with painted bodyshell, 2.4 GHz radio control system, servos, batteries in our configurator. Team decals are not included in the delivery content and have to be ordered separately.The engine runs with a 2-stroke petrol-oil mixture. Through the installed pull-start system the engine can be started without any problems. A tank filling enables you to run your model around 45 minutes. Equipment and technical description:Solid 4mm chassis made of high-quality aluminium low-wear belt drive splash-proved 2 differential gears double wishbones at front and rear axle toe-in, castor and wheel camber adjustable at the axles - rear FG ball drive all steel driving components hardened all rotating parts ball-beared servo relieving servo saver front disk brake rear gear brake with big brake disk 700ccm fuel tank with snap closure oil-pressure shock absorbers with volume control and spring adjusting ring 26 cm³ combustion engine with Tuning pipe fabric hollow chamber tires with inserts receiver box and battery holder polycarbonate bodyshell 2.4 GHz pistol grip radio control system with steering and gas servo.Dimensions: Length: 980 mm Width: 405 mm Height: 250 mm Wheelbase: 510 mm Touring cars in action!Painting tips:

From €1,299.95*

Configure now

2009-25, Mecatech Klick-Shock spring tension adjustment nut, 1 pce.

€10.00*

Details

6180/01 FG Roll bar for Stadium Truck

Genuine FG spare/option part. This roll bar is just for looks, not for protection. It consists of aluminum tubes and plastic corner joints.Fits stadium truck body shells.Contents:1 set

€16.30*

y2012-01 Complete Ball bearing set for FW01

Complete ball bearing set for the Mecatech FW01, sealed on both sides.

€59.90*