2012-123 Mecatech Bush for rear Wheel Toe in 1° -3°

€29.50*

Prices incl. VAT plus shipping costs

Available

Product number: mec_2012_123

EAN: 4058575003014

Product information "2012-123 Mecatech Bush for rear Wheel Toe in 1° -3°"

Genuine Mecatech spare/option part for the FW01.

Content:

4 pieces

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Similar products

2012-106 Mecatech Aluminium Washer for Engine Fastening

Genuine Mecatech spare/option part for the FW01.Content:4 pieces

€8.30*

2012-108 Mecatech Zahnrad Z64

Genuine Mecatech spare/option part for the FW01.Content:1 piece

€61.00*

2012-104 Mecatech Countersunk Screw M5x14

Genuine Mecatech spare/option part for the FW01.Content:8 pieces

€3.80*

2012-122 Mecatech Rear Driving Axle

Genuine Mecatech spare/option part for the FW01.Content:1 piece

€23.00*

2012-105 Mecatech Countersunk Screw M5x12

Genuine Mecatech spare/option part for the FW01.Content:8 pieces

€3.80*

2012-107 Mecatech Gearwells Retaining Ring

Genuine Mecatech spare/option part for the FW01.Content:4 pieces

€2.60*

2012-112 Mecatech Pinion Z24

Genuine Mecatech spare/option part for the FW01.Content:1 piece

€41.80*

2012-121 Mecatech Square Wheel Driver 11,5 mm

Genuine Mecatech spare/option part for the FW01.Content:1 piece

€17.50*

2012-124 Mecatech Bush for rear Wheel toe in 1,5° -2,5°

Genuine Mecatech spare/option part for the FW01.Contents:4 pieces

€29.50*

Details

GPM 6079/01 Ball drive wheel shaft for all FG and Mecatech cars, 1 pce.

Fits all FG cars and the Mecatech FW01. The GPM drive parts are made of high quality spring steel and due to its elasticity provide high impact resistance and extreme stability. Ground bearing seats ensure maximum accuracy of fit. Ball drives run significantly smoother and with less wear than normal dog bones with pins. The GPM ball drives can be partially mixed with FG parts. The heads of the GPM driveshafts fit into FG differential cups or wheel shafts.The opposite combination, i.e. FG shafts in GPM differential cups or wheel shafts does not always fit. We had tests where some FG shafts fit neatly, but due to slight tolerances others who did not fit into the very same cups/shafts. For this combination, we can not guarantee compatibility! Dimensions: Diameter: 8 mmTotal length 76.6 mm

From €32.90*

Details

2012-120 Mecatech Spacer for Rear Upright Bearing

Genuine Mecatech spare/option part for the FW01.Content:2 pieces

€5.90*

2012-115 Mecatech Rear upper Wishbone Shaft

Genuine Mecatech spare/option part for the FW01.Content:2 pieces

€7.70*

Customers also viewed

2012-227 Rear anti-roll bar

Genuine Mecatech spare/option part for the FW01.Fits all versions from Mecatech FW01.Contents:1 piece

€174.00*

Details

2012-124 Mecatech Bush for rear Wheel toe in 1,5° -2,5°

Genuine Mecatech spare/option part for the FW01.Contents:4 pieces

€29.50*

Details

y1309 All steel linkage for steering servo/servo saver application

Genuine HT spare/option part.Very strong linkage with M6 steel ball joints.M6 threaded rod with lock nuts, balls with holes for M4 screws.Maximum length about 96 mm, but through cutting the M6 rod allows for a minimum length of 48 mm.Significantly stronger than the standard plastic version, and especially recommend when using the Hitec HS-900SGS/HS-1000SGT/HS-1005SGT/HS-1100WP servo, this linkage can be used with "normal" servos as well.The threaded rod is not designed as a turnbuckle for a reason because there is not need to change the adjusted length for this application after installation. The setting accuracy of 0.5 mm (½ turn) means a maximum difference to the ideal length of 0.25 mm. This is always sufficient, the trim on the transmitter handles the final adjustment.On the other hand, a connecting rod with the same thread on both ends will always keep its setting when installed, even when both lock nuts are not tightened against the ball joints. Therefore reliability is higher.Set includes:2 x steel ball joints M62 x flat lock nuts1 x M6 x 60 mm threaded piece for Losi 5ive-T1 x M6 x 80 mm threaded piece for Losi 5ive-T 2.02 x spacer tubesContents:1 piece

€27.90*

6496/05 FG Toe-in adjustment ring 3°

Genuine FG spare/option part. Content:4 pieces

€34.50*

2012-128 Mecatech Bush for rear Wheel toe in 4°

Genuine Mecatech spare/option part for the FW01.Content:4 pieces

€29.50*

6534/02 FG Throttle pivot post

Item N° 6534/02 Throttle pivot post 3.1mm - setRevised set for 2 mm linkages, but with 3.1 mm pivot bore to prevent linkage seizing. Can be used for throttle or brake applications.Set collars have 2.1 mm inner diameter.

€7.90*

6020 FG Collet 2,1 mm

Genuine FG spare/option part. Necessary for all throttle and brake linkages.Dimensions:Outer diameter: 7 mmWidth: 5 mmContents:5 pieces

€5.95*