194100ER Challenge Line 2WD 530E RTR
Product number:
fg_194100er
EAN:
4058575132394
Product information "194100ER Challenge Line 2WD 530E RTR"
Genuine FG spare/option part.
The following items are required for completion: body mounts, body, LiPo driving batteries and charger.
The models are built on a 4mm aluminium chassis with double wishbones front and rear. All borings are countersunk. Fully adjustable front and rear double wishbone suspensions.
Further equipment points are: differential gear, oil-pressure shock absorbers with volume control and external, adjusting ring for the initial tension of the spring. All rotating parts on ball bearings.Tires are glued on the rims.
RTR version:
Radio system 2.4GHz
Steering metal gear servo 26kg
Brushless engine 1100KV
150A controller
The following items are required for completion: body mounts, body, LiPo driving batteries and charger.
The models are built on a 4mm aluminium chassis with double wishbones front and rear. All borings are countersunk. Fully adjustable front and rear double wishbone suspensions.
Further equipment points are: differential gear, oil-pressure shock absorbers with volume control and external, adjusting ring for the initial tension of the spring. All rotating parts on ball bearings.Tires are glued on the rims.
RTR version:
Radio system 2.4GHz
Steering metal gear servo 26kg
Brushless engine 1100KV
150A controller
| Drive: | 2WD |
|---|---|
| Motorization: | Current |
| RTR: | With RTR |
| Scale: | 1/5 |
Login
Customers also bought
Genuine FG spare/option part. Front tuning disk brake for all FG 1:5 models and Race-Trucks, the current version from Evo, with 2-damper front axle and the Mono-Shock axle except Formular 1 and Leopard.The disk brakes prevent a breaking-out of the rear, have a very sensitive adjustment and are optically very effective. You can run the front disk brake with the gas servo, but make sure the servo has a minimum regulating power of six kilograms. We recommend to steer over two servos if you install front and rear disk brake. We deliver the disk brakes without uprights. In combination with the rim 6105/01 also suitable for Marder, Beetle and Pajero.Additional equipment for front and rear tuning disk brake:Flexible bowden cablesAlloy guiding plate with ball bearingSteel bushStud bolt for brake liningLasered tuning disk brakeCompetition brake lining
Low-priced retrofitable disk brake for the rear wheels. Suitable for all 1:5 and 1:6 models and Race-Trucks. In connection with the front disk brake very high brake power, optically very effective. We recommend to steer over 2 servos if you install the front and rear disk brake. We deliver the disk brake without uprughts.Contents:1 piece
Genuine FG spare/option part. Machined alloy front uprights with replaceable steering arm, accept 608 sized bearings (8 x 22 x 7 mm, stock size). Fits all FG (except 4wd models) and Carson / Smartech 2WD 1/5 and 1/6 cars.included in delivery contents:4 x M5 x mm screws8 x M3 x mm screws8 x M5 x mm washerFor installation in offroad cars you will need shorter steering rods 7028/01.Contents:2 pieces
Genuine HT spare/option part.Alloy upright for a ball fastening at the upper wishbone. Adjustable at the lower wishbone (hinge pin), too. Fits the rear axle of all FG and Carson / Smartech 1/6 scale cars.Comes with adjustment clips and grub screws for the hinge pins included.Dimensions:Bearing seats: 22 x 7 mmHinge pin bore: 6 mmDistance wheel shaft/hinge pin: 25 mm Contents:2 pieces
y2009 TopTuning Digital pro 25 kg is a digital large scale servo with very robust metal gears.It offers a lot of power at a good speed and has a metal housing.Its installation dimensions fit directly as a throttle / brake servo for FG, HPI and various other models! Top Tuning Bigscale 25kg - servo for throttle / brake Dimensions identical to: FG 6598 t1005 10 kg Spectrum Z590 6 kg HPI SF 20W 7 kg y2007 Digital Bigscale 30 kg y2008 Digital Bigscale 20 kg Technical data: Classification: universal servo Dimensions LxWxH (mm): 40.5 x 20 x 39 mm Operating voltage: 6 volts / 7.4 volts Torque: (Ncm): 220/250 Speed (sec / 60 °): 0.14 / 0.12 Number of ball bearings: 2 Servo gear: metal gears Seals: 3 (splash-protected) Silicone cable: with universal plug, 300 mm long Weight: 62.5 grams Steel output shaft 25T spline Content: 1 piece of TopTuning Digital pro servo 25 kg 1 piece double sided servo arm 53 mm total 1 piece of 35 mm single sided servo arm 4 pieces of guide sleeves 4 pieces of rubber grommets 4 pieces of fastening screws
Typical featuresLow inner resistance with high MPVHigher energy density with lower weightLonger lifecycle under proper usage, up to 200 timesFor LiPo batteries, the peak amp rate is usually twice the continuous crateCan be charged with 3C when time is criticalRecommended charge with 2 3CConnectors: EC5, XH-balancer.Dimensions: Length +/- 5 mm: 138,5 mmWidth +/- 1,5 mm: 47 mmHeight: +/- 1,5 mm: 36,5 mmWeight +/- 10g: 363gContents:1 piece
Similar products
Genuine FG spare/option part. The following items are required for completion: electric motor, ESC, steering servo, radio system, body mounts, body, LiPo driving batteries and charger.The models are built on a 4mm aluminium chassis with double wishbones front and rear. All borings are countersunk. Fully adjustable front and rear double wishbone suspensions.Further equipment points are: differential gear, oil-pressure shock absorbers with volume control and external, adjusting ring for the initial tension of the spring. All rotating parts on ball bearings.Tires are glued on the rims.
Genuine FG spare/option part. The following items are required for completion: body mounts, body, LiPo driving batteries and charger.The models are built on a 4mm aluminium chassis with double wishbones front and rear. All borings are countersunk. Fully adjustable front and rear double wishbone suspensions.Further equipment points are : differential gear, oil-pressure shock absorbers with volume control and external, adjusting ring for the initial tension of the spring. All rotating parts on ball bearings. Tires are glued on the rims.RTR version : Radio system 2.4GHz Steering metal gear servo 26kg Brushless engine 1300KV 150A controller
Original FG spare/tuning part. The following items are required for completion:- E-motor, ESC, steering servo, transmitter system, LiPo drive batteries and charger. The models are built on a 4 mm aluminium chassis with double wishbones on the rear and front axles. All holes in the aluminium chassis for attaching the chassis parts are countersunk from below. The camber, caster and toe-in can be adjusted on the front and rear axles using track rods or adjusting screws with right/left-hand thread.
Further equipment points are: Differential gear, smooth-running FG ball drive, oil-pressure shock absorbers with volume compensation and external adjustment ring for the spring preload. All rotating drive parts such as shafts, axles etc. are mounted on ball bearings. The tyres are glued to the rim. Not included : - RC system - 1100 KV brushless motor - 160A controller - Servo- You will also need Lexan paint and a decal sheet.Dimensions : - Length......840 mm - Width.....395 mm - Height.......250 mm - Wheelbase...465 mm
Genuine FG spare/option part. The following items are required for completion: body mounts, body, LiPo driving batteries and charger.The models are built on a 4mm aluminium chassis with double wishbones front and rear. All borings are countersunk. Fully adjustable front and rear double wishbone suspensions.Further equipment points are : differential gear, oil-pressure shock absorbers with volume control and external, adjusting ring for the initial tension of the spring. All rotating parts on ball bearings. Tires are glued on the rims.RTR version : Radio system 2.4GHz Steering metal gear servo 26kg Brushless engine 1300KV 150A controller
Genuine FG spare/option part. The following items are required for completion: electric motor, ESC, steering servo, radio system, body mounts, body, LiPo driving batteries and charger.The models are built on a 4mm aluminium chassis with double wishbones front and rear. All borings are countersunk. Fully adjustable front and rear double wishbone suspensions.Further equipment points are : differential gear, oil-pressure shock absorbers with volume control and external, adjusting ring for the initial tension of the spring. All rotating parts on ball bearings. Tires are glued on the rims.
Genuine FG spare/option part. The following items are required for completion: electric motor, ESC, steering servo, radio system, body mounts, body, LiPo driving batteries and charger.The models are built on a 4mm aluminium chassis with double wishbones front and rear. All borings are countersunk. Fully adjustable front and rear double wishbone suspensions.Further equipment points are: differential gear, oil-pressure shock absorbers with volume control and external, adjusting ring for the initial tension of the spring. All rotating parts on ball bearings.Tires are glued on the rims.
Customers also viewed
Genuine FG spare/option part. The following items are required for completion: electric motor, ESC, steering servo, radio system, body mounts, body, LiPo driving batteries and charger.The models are built on a 4mm aluminium chassis with double wishbones front and rear. All borings are countersunk. Fully adjustable front and rear double wishbone suspensions.Further equipment points are: differential gear, oil-pressure shock absorbers with volume control and external, adjusting ring for the initial tension of the spring. All rotating parts on ball bearings.Tires are glued on the rims.
Genuine FG spare/option part. The following items are required for completion: body mounts, body, LiPo driving batteries and charger.Developing a chassis with highest driving dynamics and best performance was our target here, too. Maximal traction as well as simple handling, best grip in curves, these are the advantages only an all-wheel-driven model can offer.The 4-wheel transmission is based on a low-wear gear belt and 2 differentials. Fully adjustable front and rear double wishbone suspensions. Oil-pressure shock absorbers with volume control and external adjusting ring for the initial tension of the spring. All rotating parts on ball bearings.With this robust, reliable and high-performance chassis equipped with a powerful 4200W brushless motor, with power supplied by 2 battery packs 2S (on special request 2 x 3S possible), you will be able to initiate yourself silently to the pleasure of driving. RTR version : RC System 2.4GHz Steering servo 26 kg Brushless engine 1300KV 150A controller
Genuine FG spare/option part. The following items are required for completion: electric motor, ESC, steering servo, radio system, body mounts, body, LiPo driving batteries and charger.The models are built on a 4mm aluminium chassis with double wishbones front and rear. All borings are countersunk. Fully adjustable front and rear double wishbone suspensions.Further equipment points are: differential gear, oil-pressure shock absorbers with volume control and external, adjusting ring for the initial tension of the spring. All rotating parts on ball bearings.Tires are glued on the rims.
The FG Touring and Sports cars at scale 1:5 are known for their high quality and very detailed bodyshells true to original. Also the technically fully developed chassis are worth mentioning. These models are now available with a high-torque brushless engine. Surface conditions with maximum grip assumed speeds above 100 km/h can be reached and steered controlled. E stands for electric power which is equivalent to extremely high torque, high speed and all this without any engine noise. The Sportsline models are equipped with a powerful brushless engine and a Brushless ESC. This control can be regulated simply via transmitter or optionally via the program card. Equipment: y1567 ZTW Beast Pro 200A Regler TT5692 Top Tuning Brushless Motor 1090 kV You can select the car with complete RTR-equipment from the options menu. RTR equipment RTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed. Transmitter: Reflex Wheel Pro III 2,4 GHzReceiver: Empfänger: Mini BECy1570 CYS S0650 Largescale servo, 40 kg/0,11 secTx-batterys 4 pieces y0660/04 All E-Power versions need for the final assembling LiPo batteries and the suitable charger. For an unproblematic mounting we recommend to use LiPo batteries with a max. length 150mm and a width of 50mm. The model is delivered with an EC8 connector system.
Original FG spare/tuning part. The following items are required for completion:- E-motor, ESC, steering servo, transmitter system, LiPo drive batteries and charger. The models are built on a 4 mm aluminium chassis with double wishbones on the rear and front axles. All holes in the aluminium chassis for attaching the chassis parts are countersunk from below. The camber, caster and toe-in can be adjusted on the front and rear axles using track rods or adjusting screws with right/left-hand thread.
Further equipment points are: Differential gear, smooth-running FG ball drive, oil-pressure shock absorbers with volume compensation and external adjustment ring for the spring preload. All rotating drive parts such as shafts, axles etc. are mounted on ball bearings. The tyres are glued to the rim. Not included : - RC system - 1100 KV brushless motor - 160A controller - Servo- You will also need Lexan paint and a decal sheet.Dimensions : - Length......840 mm - Width.....395 mm - Height.......250 mm - Wheelbase...465 mm
Genuine FG spare/option part. The following items are required for completion: electric motor, ESC, steering servo, radio system, body mounts, body, LiPo driving batteries and charger.The models are built on a 4mm aluminium chassis with double wishbones front and rear. All borings are countersunk. Fully adjustable front and rear double wishbone suspensions.Further equipment points are : differential gear, oil-pressure shock absorbers with volume control and external, adjusting ring for the initial tension of the spring. All rotating parts on ball bearings. Tires are glued on the rims.
Genuine FG spare/option part. The following items are required for completion: electric motor, ESC, steering servo, radio system, body mounts, body, LiPo driving batteries and charger.This model is based on the Sportsline 4WD chassis modified for drift driving.It features an aluminium engine mount and crown gear, short gear ratio, universal drive shafts, harder suspension, special slick tires.Option parts included : Front universal shaft set 68415 Aluminium gear carrier 07439 Drift wheels 08939Dimensions : Length : 830mm Width : 405 mm Height : 260 mm Wheelbase : 510 mm Weight : 10,2 kg