1080/01 FG Insert nuts for 1080

€15.90*

Available

Product number: fg_1080_01

EAN: 3410564500460

Product information "1080/01 FG Insert nuts for 1080"

Genuine FG spare/option part.

Are needed for the installation of the CFK chassis reinforcement (1080).

For every bar are needed four nuts.

Contents:

4 pieces

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Similar products

1018/01 FG Tuning Throttle linkage

Genuine FG spare/option part. Tuning rods with flexible ball head for the screw on the engine.Fits on all FG models with lying engine.Contents:1 piece

€8.90*

1018/05 FG Spacer bushing 5 x 20 mm for raising throttle linkage

Original Losi Ersatz-/Tuningteil.Spare parts for Evo Porsche to get there without any problems with the linkage on the fuel tank. But also a very useful distance bolts of it is because the gas / brake / hydraulic linkage to the servo to insert later. Therefore will make the bending of the linkage in most superfluous.The recommended screw us with the part number 6724/12 available as a link in the lower part of the page for accessories.Contents:1 piece

€3.90*

1074/01 FG Guide bush without collar

Genuine FG spare/option part. Is needed for 1074. Dimensions:6 x 8 x 10 mmContents:4 pieces

€3.50*

1039 FG Alloy gear plate Evo 04 - 08

Genuine FG spare/option part.Only suitable for alloy gear flange-engine mount 1040/05.See below for layshaft 10x19x7 mm and clutch bell 10x22x6 mm bearings.Content:1 pieces

€54.90*

1075 FG Rear alum. damper plate EVO/Competition

Genuine FG spare/option part.The damper plate 2011 received further adjustment borings for the shock absorbers. According to a modified set-up the shock absorbers can be mounted much flatter in combination with the rear alum. damper mount. The model therefore has much more cornering grip.Suitable for the Competition 07-510 and 07-530 models as well as for the Competition EVO 08-510 and EVO 08-530 models.Contents:1 piece

€48.30*

1038 FG Rear bowden cable holder Evo 04 - 08

Genuine FG spare/option part. Is sheeted in the Evo 04 / 08 in connection with the mechanical disk brake.Only suitable for Evo 04-08 gear plate 1039Content:1 pieces

€29.90*

1078/01 FG Alloy upright extension for Evo 04 - 14

Genuine FG spare/option part. Suitable for all FG models with original FG alloy uprights (6477). Not suitable for F1 models. Contents:1 piece

€21.90*

1072/03 FG Rear alum. damper mount 2011 for Evo 04 - 14

Genuine FG spare/option part.The mounting of the rear damper mounts allow a higher pitch of the rear shock absorber.The model therefore has more stability in curves. Suitable for the FG Competition / EVO 04- 14 models.Contents:2 pieces

€50.50*

1071/06 FG Ball guide 5,5 mm front, for Evo 2020.2

Genuine FG spare/option part. for FG Evo 2020.2.Can also be installed on FG Evo 2020 using the FG 1071/04 clambing bolts.Content:1 piece

€13.90*

1071/05 FG Stabilizer rod mount 4 mm rear, for Evo 2020

Genuine FG spare/option part. FG Stabilizer rod mount 4 mm rear, for Evo 2020Content:4 piece

€38.50*

1071/07 FG Ball socket 5,5 mm front, for Evo 2020.2

Genuine FG spare/option part. for FG Evo 2020.2Can also be installed on FG Evo 2020 using the FG 1071/04 clambing bolts.Content:1 piece

€13.90*

1013/04 FG Battery pack holder for Evo 2020

Genuine FG spare/option part. for FG Evo 2020Dimensions:Distance between holes: 120 mmTotal length: 137 mmContent:1 piece

€25.90*

Customers also viewed

FG Sportsline 2WD-530 with Audi RS5 body shell, 23cm³ Engine

The Sportsline quality at a reasonable price for beginners. For rookies and all those who simply just want to have fun and drive a DTM Audi, Mercedes or a fast Porsche. The Sportsline series is ideal for car modellers whose main focus is not just the chassis, but rather the combination of chassis and body shell.Technical description:The model has a 535 wheelbase. The models are built on a 4mm alloy chassis with double wishbones at front and rear axle. All borings of the alloy chassis are countersunk to prevent the screw heads from bearing out. The models are serial equipped with the 2-damper front axle which guarantees an optimal traction of both front wheels. At the front/rear axle you can adjust through track rods or adjusting screws with right-/left-handed thread the king pin angle, trailing effect and toe-in. Further equipment points are front disk brakes, differential gear, easy-running FG ball drive, alloy brake calliper with big brake disk, stabilizer bar front and rear, tuned pipe muffler, Evo gas tank, rear brace, 24T steel pinion, spark plug cap suppression cover, latest version (Evo) oil-pressure shock absorbers with volume control and external adjusting ring for the initial spring preload. All rotating parts as shafts, axles and clutch bells a.s.o. are supported by ball bearings. You can select the car with complete RTR-equipment from the options menu. RTR-equipment RTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed. Transmitter: Reflex Wheel Pro III 2,4 GHzReceiver: Mini BECHigh power servo for throttle and brakeLargescale servo for steeringTx-battery, rx-battery The models are equipped with a powerful 23ccm combustion engine. The engine needs a 2-stroke petrol oil mixture. One tank filling gives you about 45 minutes driving fun. The power is transmitted over the well-tried system: from the engine over the 2-block clutch over radial tooth wheels on to the rear axle which is equipped with the bevel differential gear with pluggable axles. RC-plate with receiver box.To complete the models all merchantable servos and radio control systems are suitable. The RTR version comes with complete factory installed rc-system, including Ni-Cads!Dimensions: Length: 880 mm Width: 392 mm Height: approx. 240 mm Wheelbase: 530 mm The car comes with an unpainted body shell!Touring cars in action!Painting tips:

From €1,149.90*

Configure now