1075 FG Rear alum. damper plate EVO/Competition

€44.50*

Available

Product number: fg_1075

EAN: 3410564500422

Product information "1075 FG Rear alum. damper plate EVO/Competition"

Genuine FG spare/option part.

The damper plate 2011 received further adjustment borings for the shock absorbers. According to a modified set-up the shock absorbers can be mounted much flatter in combination with the rear alum. damper mount. The model therefore has much more cornering grip.

Suitable for the Competition 07-510 and 07-530 models as well as for the Competition EVO 08-510 and EVO 08-530 models.

Contents:

1 piece

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Accessories / Spare parts

y19049/01 Upper shock quick mount SW8

Genuine HT spare/option part. The upper shock quick mount makes it easier to change the shocks. No tool is needed, since a small body clip replaces the previously used nylock nut SW8.Fits front and rear axle. Including bolts and body clips.Contents:2 pieces

€10.20*

Similar products

1018/01 FG Tuning Throttle linkage

Genuine FG spare/option part. Tuning rods with flexible ball head for the screw on the engine.Fits on all FG models with lying engine.Contents:1 piece

€9.90*

1018/05 FG Spacer bushing 5 x 20 mm for raising throttle linkage

Original Losi Ersatz-/Tuningteil.Spare parts for Evo Porsche to get there without any problems with the linkage on the fuel tank. But also a very useful distance bolts of it is because the gas / brake / hydraulic linkage to the servo to insert later. Therefore will make the bending of the linkage in most superfluous.The recommended screw us with the part number 6724/12 available as a link in the lower part of the page for accessories.Contents:1 piece

€4.30*

1080/01 FG Insert nuts for 1080

Genuine FG spare/option part. Are needed for the installation of the CFK chassis reinforcement (1080).For every bar are needed four nuts.Contents:4 pieces

€15.90*

Details

1074/01 FG Guide bush without collar

Genuine FG spare/option part. Is needed for 1074. Dimensions:6 x 8 x 10 mmContents:4 pieces

€3.70*

1078/01 FG Alloy upright extension for Evo 04 - 14

Genuine FG spare/option part. Suitable for all FG models with original FG alloy uprights (6477). Not suitable for F1 models. Contents:1 piece

€23.90*

1039 FG Alloy gear plate Evo 04 - 08

Genuine FG spare/option part.Only suitable for alloy gear flange-engine mount 1040/05.See below for layshaft 10x19x7 mm and clutch bell 10x22x6 mm bearings.Content:1 pieces

€49.95*

1072/03 FG Rear alum. damper mount 2011 for Evo 04 - 14

Genuine FG spare/option part.The mounting of the rear damper mounts allow a higher pitch of the rear shock absorber.The model therefore has more stability in curves. Suitable for the FG Competition / EVO 04- 14 models.Contents:2 pieces

€47.50*

1063/02 FG Spacer bushing, rear axle brace Evo truck 04 - 08

Genuine FG spare/option part. When installing the higher Truck rear axle riser plates, these spacer are needed to compensate for the increased height difference between engine mounts (1063/01 and 1040/05) and rear axle brace 1063.Small spacer: 8 mm hex, 9.1 mm height, 4 mm bore.Large spacer: 10 mm hex, 9.1 mm height, 5 mm bore.You'll need a longer screw (M4x20) for installation of the r/h engine bracket 1063/01.Fits for Evo 04 - 08. Contents:2 pieces

€4.90*

1075/01 FG Rear damper mount for Evo 2020-2020.2

Genuine FG spare/option part. for FG Evo 2020 to FG Evo 2020.2.Content:1 piece

€64.95*

1080/03 FG Chassis stiffening for Evo 2020.2

Genuine FG spare/option part. for FG Evo 2020.2 models.Content:1 piece

€57.95*

Details

1074/10 FG Conversion kit Rear upper wishbone for Evo 04 - 14

Genuine FG spare/option part. for FG Evo 04 - 14 models.Suitable for the 1:5 FG EVO and Competition models. Replaces the alum. wishbone and rear upper wishbone pin.Contents:1 set

€19.70*

1038 FG Rear bowden cable holder Evo 04 - 08

Genuine FG spare/option part. Is sheeted in the Evo 04 / 08 in connection with the mechanical disk brake.Only suitable for Evo 04-08 gear plate 1039Content:1 pieces

€29.90*

Customers also viewed

6079/01 FG Rear axle shaft for ball drive

Genuine FG spare/option part. For ball drive system only!Diameter: 8 mm.Contents:1 piece

€33.90*

Details

1214/01 FG Carbon RC deck for Evo 2020

Genuine FG spare/option part. For four small standard servos 40x20 mm.Content:1 piece

€73.95*

Details

6479 FG Rear alloy uprights 08

Alloy upright for a ball fastening at the upper wishbone. Adjustable at the lower wishbone (wishbone pin), too. Fits the rear axle of all FG offroad cars (2WD and 4WD) and all Carson / Smartech cars.Content:Bearing seats: 22 x 7 mmHinge pin bore: 6 mmDistance wheel shaft/hinge pin: 25 mm

€109.50*

7343/08 FG Spark plug CMR7H

Genuine FG spare/option part.Thread size M10 x 1 mm.Contents:1 piece

€19.90*

y0669 Rear alloy upright for 1:5 and 1:6 models

Genuine HT spare/option part. Rear alloy uprights for 1:5 and 1:6 models and 4WD Porsche, CNC-cut, optimal fitting, non-twisting even by heat.Dimensions:Bearing seats: 22 x 7 mmHinge pin bore: 6 mmDistance wheel shaft/hinge pin: 20 mmContents:1 set

€74.90*

y0040 KENT hose quick couplings for all 1/5 & 1/6 cars

y0040 Variant: y0040 Coupling member A and B

The secure hose connection for engine or tank removal! Advantages of the Kent system quick couplings: A safe opening and closing with one hand, as soon as one side is fixed. The design of the "shut-off" valve is a double chamber system, which closes when disconnecting the coupling. (This design enables easy and safe opening of the quick couplings, even under high pressure. Similarly, just as in low pressure applications.) You feel a snap when connecting the couplings, preventing over-tightening or accidental opening. The actions of opening and closing the quick couplings are identical, so that the handling is extremely simple. An ergonomic design guarantees easy handling, yet the space requirement for the couplings is low. Long and safe life of the couplings even with frequent connection and disconnection. In order to protect the fully encapsulated KENT quick coupling system against dirt even after dismantling, sealing the ends with the corresponding white plugs and caps is recommended.

€16.90*

2012-286 Mecatech Double servo radioplate for short chassis

Genuine Mecatech spare/option part. Contents:1 piece

€60.90*

Details