10321 FG Alloy front chassis for F1 Competition

€64.90*

Prices incl. VAT plus shipping costs

Available

Product number: fg_10321

EAN: 3410564526194

Product information "10321 FG Alloy front chassis for F1 Competition"

Genuine FG spare/option part.

Contents:

1 piece

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

No reviews found. Share your insights with others.

Similar products

10259 FG Body detail kit F1

Genuine FG spare/option part.Contents:1 set

€13.90*

10265/03 FG Mount for front spoiler - 2pcs.

Set not included mounting parts. Replacement part for Frontspoiler No. 10265

€9.20*

10269 FG Team decals Buzzin-Hornets Formula 1

Genuine FG spare/option part.Measures:475 x 360 mm475 x 320 mm345 x 160 mm

€28.80*

10267 FG Team decals HP-Castrol Formula 1

Sheet dimensions:470 x 370 mm410 x 255 mm

€28.80*

10330 FG Front axle carrier left for F1 Competition

Genuine FG spare/option part. Contents:1 piece

€178.50*

10403 FG Tuned pipe F1 - set

New developed Tuning pipe with significanty more power due to the longer manifold and bigger volume. To mount this Tuning pipe the battery 6543/1 is necessary.

€244.95*

10411 FG Ball bearing set for F1

fg_10411 Version: 10411CO Competition sealed+ 5EUR

Genuine FG spare/option part. Suitable for Formula 1. The set contains all ball bearing which are necessary for one model.Contents:10411SL Sportsline:10411CO Competition:2x 8x16x6 mm4x 10x19x7 mm8x 8x22x72x 12x28x8 mm3x 8x16x5 mm4x 10x19x7 mm8x 8x22x7 mm2x 15x28x7 mm

Variants from €43.90*

€48.90*

10353/02 FG Pushrod lever, ballraced, F1 Competition

Genuine FG spare/option part.For use with bearing: Contents:1 oiece

€47.90*

10263 FG Body site parts left/right for M2000 - 2pcs.

€29.20*

10341 FG Rear axle carrier right for F1 Competition - 1pce.

€99.90*

10430 FG Upper/lower alloy wishbone left for F1 - 1pce.

Manufactured in high-strength alloy. Free from play, twisting-firm with exchangeable ball-type nipple. For mounting the wishbone threaded rods , , , or are needed as well as one ball-type nippe each wishbone.

€49.90*

10335 FG Pushrod lever l/h front or r/h rear for F1 Competition - 1pce.

€33.60*

Customers also viewed

10008 FG Formula 1 Competition 1/5

This model is fitted with numerous aluminium parts: front and rear side bulkheads, rockers, engine mount, suspension arm ends...Steel made Uniball sockets all possible enable all adjustments of the front and rear suspensions.The transmission made with a gearwheell drive offers outstanding reliability and smooth operation.Just like all other FG Competition models the FG Formula 1 Competition is the most successful model of the past years. The experiences we gained from numerous competitions have all influenced this version. The FG gearwheel drive which is extremely smooth running and cares for more power reserves. Surely FG Modellsport has created a competitive model for the next years with this version which will seamlessly follow up on the past successes. Highlights Alloy wishbones FG gearwheel drive Alloy rear axle plate FG alloy shock absorbers 04 Ball-bearing alloy servo saver 26 ccm Zenoah-Engine Airbox Tuned pipe Front- and rear brake 5 mm Chassis Lexan body shell Technical description of the FG Formula 1 Competition ki:The undercarriage of the FG Formula 1 Competition is built on an 5mm alloy chassis. All screws at the bottom of the chassis are countersunk.Front and rear axle mounts as well as the engine unit are connected over the complete length of the chassis, therefore we achieved almost the stiffness of a monocoque chassis. The quick fix system of the engine makes a fast changing of the engine possible. The drive to the rear axle is carried out over several easy-running front gearwheels and an FG ball drive at the rear axle. A separate flange bearing holds the clutch bell in order to relieve the crankshaft. Front and rear axle with their various adjusting possibilities as king pin angle, castor a.s.o. consist of alloy delta wishbones below. Solid alloy rear axle plates reduce the wear at the rear axle and give an enormous driving stability. 4 oil-pressure shock absorbers controlled by a pushrod suspension as well as stabilizers guarantee an optimal ground contact.We deliver the chassis selectively with tuning bowden cable brakes for front or respectively rear axle. The model is powered by a high-capacity 26 cm³ engine with airbox and Tuning pipe.Equipment of the FG Formula 1 Competition kitCNC-cut 5mm alloy chassis with lateral carbon fiber inserts, 26 cm³ engine, inlet silencer, Tuning pipe, FG gearwheel drive, ball drive, complete rear and front axle carrier unit with integrated engine quick-fixing device, double alloy wishbone fastenings, lower alloy delta wishbones at front and rear axle, front and rear alloy uprights, ball-bearing servo saver, steering stops, pushrods, 4 oil-pressure shock absorbers with alloy damper pistons, mechanical Tuning brakes at front and rear, stabilizer for front and rear axle, 10mm alloy balls, rear spoiler, polycarbonate body shell, polyamide front spoiler, receiver box, competition tires with tire inserts.We deliver the models as a kit including mounting instruction. The body parts are made of clear polycarbonate for your own painting. FG stickers and writings are enclosed.For the final assembly of the models you need further: radio control system (transmitter, receiver), 1 large steering servos (each approx. 40 - 50 kg), 2 servo for throttle brake (approx. 20 - 30 kg), batteries and charger.These parts are not included and must be supplied or ordered separately when the rc installation option is selected! Includet Zenoah 26cc engine Clear bodyshell and polycarbonate spoiler Mechanical brakesDimensions Length: 960mm Width: 440mm Height: 230mm Wheelbase: 620mm Formular 1 models in action!

€2,499.95*

Configure now

10639 FG Gear drive for F1 Competition, set

During the past years engines and tires became stronger and so the belt drive's power transfer capabilities where no longer up to the task. Therefore we developed the gear drive which has what it takes to reliably keep up with even the strongest engines for years to come.A further advantage is the smoothness of the gear drive compared to the belt, which reduces overall drag significantly.The set includes all necessary parts to convert the FG Formula 1 Competition to gear drive.

€524.95*

10631, FG F1 rear lower alloy wishbone 09, 1 pce.

Milled in high-strength aluminium, suitable for the Formula 1 models Competition and Sportsline.

€98.95*

10640 FG Alloy rear bulkhead l/h F1 Comp. - 1 pce

Spare part for F1 gear drive

€106.50*

10353/02 FG Pushrod lever, ballraced, F1 Competition

Genuine FG spare/option part.For use with bearing: Contents:1 oiece

€47.90*