y1477 Losi 5ive-T/2.0/B and Losi MINI 300m steel HD differential drive cups, booted f/r

€119.90*

Available

y1477 Versin

Product number: y1477.0

EAN: 4058575074861

Product information "y1477 Losi 5ive-T/2.0/B and Losi MINI 300m steel HD differential drive cups, booted f/r"

Genuine HT spare/option part.

These heavy duty differential drive cups for front or rear differential in a Losi 5ive-T/B or MINI WRC are made of 300M / Böhler V132 steel and are characterized not only by high hardness, but also simultaneously toughness. The service life is therefore much higher than for the stock cups.

300M steel is used in motorsport and aviation for high strength parts. As a highly pure material, it is significantly more expensive than conventional steels, its high basic strength and toughness make the machining a time-consuming task.

The shape of these drive cups now allows the use of driveshaft boots and grease lubrication, which increases service life enormously. In addition, these HD drive cups have two sets of slots for the pin of the drive shaft, this means another doubling of the service life.

We recommend y0809 Klüber grease for lubrication of closed HD drive cups.
A dry run like with stock parts is theoretically possible, but absolutely not recommended because it would waive the enormous advantage of encapsulated lubrication and the associated wear reduction.

The set for the rear includes modified stock alloy bearing carriers, which provide improved clearance for the driveshaft boots.

You can find advices for installation at the specifications-tab.

Contents:

Front set:
- 2 pieces of 300M steel HD differential drive cup, front and rear application
- 2 pieces of driveshaft boots
Rear set:
- 2 pieces of 300M steel HD differential drive cup, front and rear application
- 1 pair of modified bearing carriers
- 2 pieces of driveshaft boots

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Accessories / Spare parts

y0809 Klüber high performance grease for differentials

Freaking expensive, but it is damned fine.ASONIC HQ 72-102 is a synthetic high-temperature lubricating grease, for use in limited slip differentials. Due to the careful selection of product components and the clean manufacturing environment, ASONIC HQ 72-102 is a rolling bearing grease with a particularly low noise level.Benefits for your application:High-temperature lubricating grease for rolling bearingsHigh purityLow noiseGood water resistanceContent:1 piece, tube with 30g

Content: 30 Gramm (€730.00* / 1000 Gramm)

€21.90*

y86479 HighElastic driveshaft boots 47 mm, choice of colors, 4 pcs.

Highly flexible driveshaft boots, equivalent to HPI part # H86479.Available in the following colors:y86479/01 - blacky86479/02 - redy86479/03 - orangeContents:4 pieces

€12.90*

Details

Similar products

AT-5T004 ATOP Aluminum closed wheel nuts Losi 5ive-T/2.0/B, Mini, DBXL/2.0 and MTXL

Genuine ATOP spare/option part.CNC-machined from 6061-T6 aluminum by ATOP. Closed design, thread size M18 x 1,5 for Losi 5ive-T/B, Mini, DBXL and MTXL. Wrench size 24 mm, may fit other cars as well.Contents:4 pieces

€22.90*

Details

LO5T153 GPM Piggyback reservoir Shocks Losi 5ive-T/2.0/B/Mini, front set

Genuine GPM spare/option part. The GPM piggyback reservoir shocks increase the oil volume and the separate vent screw makes filling the shocks easier. Shocks come in pairs including all-metal lower ball joints, spring perches and springs with 2.75 mm wire diameter.These technically demanding, excellently manufactured GPM Piggyback shocks come ready for use, assembled and filled with 1000 viscosity silicone oil. For a possible fine tuning (less damping with lower viscosity, more with higher viscosity) we recommend our silicone oils y0038 (50 ml) or y0039 (100 ml). Approximately 23 cm³ of oil is required to fill one shock absorber.Suitable for Losi 5ive-T, 5ive-B and Mini.The shocks are compatible with all springs offered for these vehicles such as Front:Length extended/compressed (center-to-center of mounting points): approx. 156 mm/110 mm.Contents:2 pieces / 1 pairs

€139.90*

y0722 Axle plugs for Losi 5ive-T/2.0, Mini

y0722 Quanity: y0722/01 - Set of 4

For sealing the axles on Losi 5ive-T and Mini cars, keeps debris out of the inner screws which secure the retainer pin. Set of 4 or set of 10 to choice.Can be used for Losi 5ive-T, Mini and HPI Baja cars.

€3.90*

y0057 Ball & socket tool for Losi and HPI

Genuine HT spare/option part. Ball & socket tool with t-handle, special version for the ball joints.Fits Losi 5ive-T. 5ive-B, Desert Buggy XL, Desert Buggy XL-E, Monster Truck XL and the HPI Baja 5B and Baja 5R Ford Mustang.Contents:1 piece

€17.90*

AREA-5T-018 Aluminum spring perches Losi 5ive-T/2.0/B and Mini

Genuine FG spare/option part.CNC-machined from 6061-T6 aluminum by Area RC.Contents:2 piece

€19.90*

Details

AT-5T018 ATOP Aluminum spring perches Losi 5ive-T/2.0/B and Mini

Genuine FG spare/option part.CNC-machined from 6061-T6 aluminum by Atop RC. Contents:2 piece

From €19.90*

Details

y0041 Aluminum spring perches for Losi 5ive-T/2.0/B and Mini shocks

Genuine HT spare/option part.Aluminum spring perches for Losi 5ive-T/B and Mini shocks; with slot for fast and easy change of shock springs. Direct replacement for the stock plastic part.Contents:2 pieces

From €19.90*

Details

AT-5T006/007 ATOP Aluminum front and rear skid plate Losi 5ive-T/2.0 and Mini

Genuine ATOP spare/option part.CNC-machined from 6061-T6 aluminum by ATOP.Protects chassis plate and transmission case over rough terrain. Also reinforces the chassis plates narrow section in front of the gear case. Thickness: 4 mm, weight: complete 141 grams.Contents:1 set

€49.90*

AT-5T026 ATOP Aluminum spindles front for Losi 5ive-T/2.0/B and Mini

Genuine Atop spare/option part.CNC-machined 6061-T6 aluminum front spindles from Area RC; fits Losi 5ive-T/B and Mini. Significantly more rigid than the stock plastic partthese spindles improve steering precision and tracking.They also feature larger outer bearings (12 x 28 x 7 mm) than stock for higher load capacity. All four ball bearings are sealing bearings.Contents:2 pieces

€79.90*

AT-5T005 ATOP Aluminum axle extenders Losi 5ive-T/2.0/B, Mini, with closed nuts

Genuine ATOP spare/option part.CNC-machined from 6061-T6 aluminum by ATOP RC, increase track width for 25 mm and allow for the use of HPI 5T, Losi 5ive-T, 5ive-B and Mini rims. 5 mm o-rings protect against drive pin loss. Set of four inclusive o-rings, drive pins and closed wheel nuts (wrench size 24 mm!).Contents:1 set

€49.90*

AT-5T015 ATOP Aluminum front transmission case Losi 5ive-T/2.0/B and Mini

Genuine ATOP spare/option part.Completely cnc-machined front transmission case from billet 6061-T6 aluminum by Atop. Service life of ball bearings and ring & pinion will greatly benefit from the increased strength of this aluminum case. It also ends the problem of stripped tread holes for the mounting screws. Weight:approx. 297 gramsContents:1 piece

€159.90*

AT-5T003 ATOP Aluminum top chassis brace Losi 5ive-T/2.0 and Mini

Genuine ATOP spare/option part. CNC-machined from 6061-T6 aluminum by ATOP.Complete with all required hardware.Contents:1 piece

€29.90*

Customers also viewed

y1477 Losi 5ive-T/2.0/B and Losi MINI 300m steel HD differential drive cups, booted f/r

y1477 Versin: y1477/03 Set for the front and rear axle+ 112.74EUR

Genuine HT spare/option part.These heavy duty differential drive cups for front or rear differential in a Losi 5ive-T/B or MINI WRC are made of 300M / Böhler V132 steel and are characterized not only by high hardness, but also simultaneously toughness. The service life is therefore much higher than for the stock cups.300M steel is used in motorsport and aviation for high strength parts. As a highly pure material, it is significantly more expensive than conventional steels, its high basic strength and toughness make the machining a time-consuming task.The shape of these drive cups now allows the use of driveshaft boots and grease lubrication, which increases service life enormously. In addition, these HD drive cups have two sets of slots for the pin of the drive shaft, this means another doubling of the service life.We recommend y0809 Klüber grease for lubrication of closed HD drive cups.A dry run like with stock parts is theoretically possible, but absolutely not recommended because it would waive the enormous advantage of encapsulated lubrication and the associated wear reduction. The set for the rear includes modified stock alloy bearing carriers, which provide improved clearance for the driveshaft boots.You can find advices for installation at the specifications-tab.Contents:Front set:2 pieces of 300M steel HD differential drive cup, front and rear application2 pieces of driveshaft bootsRear set:2 pieces of 300M steel HD differential drive cup, front and rear application1 pair of modified bearing carriers2 pieces of driveshaft boots

Variants from €119.90*

€232.64*

y0809 Klüber high performance grease for differentials

Content: 30 Gramm (€730.00* / 1000 Gramm)

€21.90*

Mielke 5185 Big Power muffler set for Losi 5ive-T/2.0 and Mini

New Big-Power muffler with volume increased by about 30%, therefore especially suited for 26 - 32 cc engines.Made from aluminum tubing with a steel manifold this tuned pipe system has a lower weight than comparable units.Pure power over the complete rpm range!Fits Losi 5ive-T and Mini WRC

€219.00*

Hitec HS-1000 SGT Servo 138110, used

Servo HS-1000 SGT Hitec - 138110, usedThe servo was tested in our workshop!It was installed in a Losi 5ive-TDelivery includes the aluminum servo mounts and aluminum servo lever for Losi 5Ive-T.The first servos with this performance, not only for industrial applications, but also for XXL large-scale models. Equipped with a hand-wound brush motor for maximum reliability and durability. Aluminum housing against electromagnetic interference, an indestructible steel gearbox and digital servo electronics are further special features of these servos.Servo HS-1000 SGT Hitec - 138110Actuating force 11.1V: 84.0 kgcmActuating time 11.1 V: 0.26 sec/60 degreesActuating force 14.8 V: 110.0 kg/cmActuating time 14.8 V: 0.19 sec/60degreesDimensions: 64 x 33 x 73 mmWeight: 363 grControl: DigitalBall bearing: YesGear: MetalLength approx: 64 mmWidth approx: 33 mmHeight approx: 73 mmWeight approx: 363 gInput voltage: 11.1-14.8 VoltCondition see photos.

€159.00* €599.00* (73.46% saved)

670070 Fun Cross Sport 2WD HT-Edition

This 1/6 scale 4WD Off-Road buggy has been strongly inspired by competition types. With its front and rear Leopard type suspensions, the Fun Cross allows the most extreme drives. Built on a 4mm aluminium chassis, closed belt drive, 2 differential gears, double wishbones at front and rear axle with many adjusting possibilities as well as large-volume oil-pressure shock absorbers for traction and optimal ground contact. The model is equipped with a powerful 26 cm³ combustion engine with tuning pipe and ready oiled air-filter. The engine runs with normal 2-stroke petrol-oil mixture (available at every petrol station). The tank filling of 0,7 litres enables you to run your model around 45 minutes. With the installed pull-start system the engine can be started without any difficulties. You can select the car with complete RTR-equipment from the options menu. RTR-equipment RTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed. Transmitter: Reflex Wheel Pro III 2,4 GHzReceiver: Mini BECHigh power servo for throttle and brakeLargescale servo for steeringTx-battery, rx-battery The RTR version is delivered with assembled and preset 2.4 GHz radio control system and rechargeable batteries. To complete the non-RTR version are all popular servos and radio control systems are suitable. HT-Edition? HT-Edition means: this version comes with a big set of spare / option parts included. Steel pinions - Non-standard sizesEach of two different ratios are supplied with.Modul: m=1,5Value: 62,60 EURAlloy engine mount bigCNC machined alloy engine mount, direkt replacement for the stock plastic part, heat and tweak resistant. They come with all necessary hardware included. Value: 64,95 EUR Alloy spur gear carrierUse for 39T - 44 teeth spur gears.Value: 39,90 EUR Ball bearing set, sealed, set of 14The seal rings on sealed ball bearings keep dirt and dust out of the bearings. They are therefore particularly suitable for use in dirty and dusty environments.Value: 59,90 EURTotal value: 227,35 EURPowerful 26ccm engine with integrated pull-rope starter running with 2 stroke petrol mixturechassis with side protections.Four-wheel independent suspension with numerous adjustment possibilities.Adjustable long stroke Big Bore dampers.Hardened steel transmission on ball bearings.Protection cage can be used as a transport handle.Fully enclosed polycarbonate body, painted and decorated.Nylon rear spoiler with adjustable incidence.Installed and glued spike tires.Dimensions :Length: 770 mmWidth: 465 mmHeight: 300 mmWheelbase: 535 mmWeight: 9,1kg Contents:1 piece

From €969.95*

Configure now

AREA-5T-020 Aluminum rear shock tower Losi 5ive-T/2.0/B and Mini

Genuine Area spare/option part.CNC-machined rear shock tower from 6061-T6 aluminum by Area RC.Strong (7 mm thick), yet light weight version (98 grams). Comes with aluminum cage brackets included!Contents:1 piece

€52.00*

Losi 5ive-T front lighting, used with front bumper

4 x 12 LEDs per aluminum lamp housing tested for function.Scope of delivery as shown in the pictures.

€45.00*