Skip to main content Skip to search Skip to main navigation
+49 2151 820200
Mon-Fri 9 am - 6 pm, Sa 9 am - 1 pm
Fast shipping until 1 p.m.

y1445/00 MadMax MAXI PIN tires for FG/Smartech & Co (18mm wheel square) 1 pairs

Product information "y1445/00 MadMax MAXI PIN tires for FG/Smartech & Co (18mm wheel square) 1 pairs"

MAXI PIN 185 x 75 with black colored MadMax Extreme rims, 20-fold screwed, very tough, with 18 mm square drive and with reinforced orange beadlock rings for FG, Smartech and many more.

The MadMax MAXI PIN tires come with strong special tire inserts which allow transferring the power without canting, even on heavy cars.

MadMax MAXI PIN tire was developed specifically for astro turf tracks! The special tread design with 480 studs per tire provides excellent grip, but also a high load on tire and rim! To stabilize the tire, the outer shoulder features radial ribs which minimizes the tilting under load and counteract the shear forces during cornering. Furthermore, the MAXI PIN tire has studs positioned on the outside shoulder, which support the steering in corners.

All together the MAXI PIN tires provide maximum grip, which made it necessary to upgrade the beadlock screws on these MadMax EXTREME wheels. So they come with 3.0 mm screws instead of the usual 2.5 mm ones! Nevertheless, tires and beadlocks should be checked after every run.

Dimensions:

  • Outer diameter: 185 mm
  • tire width at bead: 70 mm
  • Tread width: 75 mm
  • Reinforced 18 mm square wheel drive

1 pair



018ddaeaa4b372588c8d18cc404f7a91.jpg

Some off-road tires knowledge can be found here!



The video shows the 18 mm square drive version. Also available with 24 mm hex.

018ddaeab18a72029a904f5fec2e046a.jpg

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Skip product gallery

Accessories / Spare parts

y1465 Beadlock screws hexalobular drive (Torx) T10
y1465 Beadlock screws hexalobular drive (Torx) T10

Genuine HT spare/option part. Hardened special screws for mounting the beadlock rings of MadMax and Losi DBXL rims.For HPI rims due to the screw head diameter only to be used in combination with non-HPI beadlock rings (i.e. MadMax or Losi 5ive-T)!The combination of larger diameter and substantially larger thread depth ensures a secure grip of the screws in the plastic of the rims; the coarse thread also allows for quick assembly.The large head with T10 hexalobular drive distributes the load as wide as possible on the ring.The screws are galvanized for rust protection.Please note: it is not recommended to use the screws in rims which had previously M3 screws installed. With new rims or in exchange for M2.5 screws appropriate strength is ensured.Dimensions: Diameter: 3,1 mmLength: 12 mmHexalobular drive: T10 (Torx) Content:1 Set of 40 screws for one pair of rims.

Regular price: €6.90
Skip product gallery

Customers also viewed

y0629 Mammoth Supergrip onroad tires 60 and 80 mm glued on Leopard rims, 1 pair
y0629 Mammoth Supergrip onroad tires 60 and 80 mm glued on Leopard rims, 1 pair
y0629_einzeln Tires: Front -hard- y0633

Kit contents: 1 pair each of mounted and glued Mammoth Supergrip  tires 60 mm and 80 mm in H or S or SS on white Leopard Race rims. These combinations are recommended for the recreational driver. Glued on FG Leopard Race rims, fits all FG, Smartech, Carson and many other cars.Mammoth Supergrip for 1/6 and 1/5 offroad carsParking lot / race tires for your offroad car. The widening rings of the rear rims are glued on the outside. VersionWidthOuter diameterFront64 mm153 mmRear78 mm153 mmGlued on the new genuine FG Leopard rims (rear tires using extension rings), with foam rubber inserts included. Rim has 18 mm square drive with reinforcement ring.Please note: based on experience we recommend against using other manufacturers rims and extensions. Since the Mammoth tires provide very good grip the rim and the bonding must withstand high loads. Due to the high torque load on the bonding of tires on largescale cars, checking the bonding from time to time and re-glueing (VersionWidthOuter diameterFront64 mm153 mmRear78 mm153 mmGlued on the new genuine FG Leopard rims (rear tires using extension rings), with foam rubber inserts included. Rim has 18 mm square drive with reinforcement ring.Please note: based on experience we recommend against using other manufacturers rims and extensions. Since the Mammoth tires provide very good grip the rim and the bonding must withstand high loads. Due to the high torque load on the bonding of tires on largescale cars, checking the bonding from time to time and re-glueing (y0067) if necessary is unavoidable.General recommendation:The dirtier the track or the lower the ambient temperatures, the stickier (softer) the rear tires should be.Hint regarding the front tires: 2WD cars should use them one or two grades harder then the rears. 4WD cars usually like the same compound all around.Of course, the softer the tire the higher the wear rate; and this applies to Mammoth Supergrip onroad tires as well.The tires have a special onroad thread pattern but will still provide ideal traction after the pattern has been worn out. The white lettering on the tires has been applied for presentation purpose only. The tires will be delivered with black sidewall.

Regular price: €59.90
Loading...
Upload in progress, please be patient ...
Shopware-Agency Shopware-Agency