y1402/01 MadMax 2 pairs CROSS BOND 170x60 tires for FG/Smartech and other (18 mm square drive) Offer

MAXI PIN 185 x 75 with black colored MadMax Extreme rims, 20-fold screwed, very tough, with 18 mm square drive and with reinforced orange beadlock rings for FG, Smartech and many more. The MadMax MAXI PIN tires come with strong special tire inserts which allow transferring the power without canting, even on heavy cars. MadMax MAXI PIN tire was developed specifically for astro turf tracks! The special tread design with 480 studs per tire provides excellent grip, but also a high load on tire and rim! To stabilize the tire, the outer shoulder features radial ribs which minimizes the tilting under load and counteract the shear forces during cornering. Furthermore, the MAXI PIN tire has studs positioned on the outside shoulder, which support the steering in corners. All together the MAXI PIN tires provide maximum grip, which made it necessary to upgrade the beadlock screws on these MadMax EXTREME wheels. So they come with 3.0 mm screws instead of the usual 2.5 mm ones! Nevertheless, tires and beadlocks should be checked after every run. Dimensions: Outer diameter: 185 mm tire width at bead: 70 mm Tread width: 75 mm Reinforced 18 mm square wheel drive Some off-road tires knowledge can be found here!The video shows the 18 mm square drive version. Also available with 24 mm hex.

Genuine HT spare/option part. Extra wide tire mounted and glued on genuine 1/6 scale FG Stadium Truck rims 6232/01.Diameter 165 mm, width 90 mm. Fits all FG and Carson largescale cars, may fit other cars with 18 mm wheel squares as well.Available in three different compounds:SoftHardWe have tried various rubber / tire compounds for several months on various forms of terrain, etc.. The Mammoth brings, due to its quite strong and large pins and the extreme width of the tire, especially on hard and low grip surfaces a high traction! The Mammoth is available in soft, medium and hard! The rule is: the harder the ground the softer the tire compound. Where other tires spin helplessly the Mammoth provides serious traction. The disadvantage of Mammoth tires: Because of their extreme width they need to be mounted on FG wheels, which is a labor intensive job. From experience, we must strongly recommend against using rims from another manufacturer in combination with extension rings. Due to the before mentioned traction no other rim has been up to the task! Broken rims and torn squares were the result. Due to the high torque load on the bonding of tires on largescale cars, checking the bonding from time to time and re-glueing (y0067) if necessary is unavoidable.However, the original FG-rim lasts without problems!Unit prices:Mammoth tires extra wide: 47,20 EUR / pairMammoth inserts extra wide: 9,70 EUR/ pairGenuine FG wide track rims 6232/01: 29,90 EUR / pairMounting + glueing rims / inserts / tires: 13,00 EURTotal: 99,80 EUR Contents:2 piecesAlso suitable for:With the following wheel adapter: y1183 Rim adapter

Genuine MadMax spare/option part.Losi and HPI foam tire inserts from can be used.The extremely rigid and differently structured lugs of the CROSS BOND ensure optimum power transmission and also allow for excellent grip on loose surfaces, such as sand and soil. The lugs are raised at the treads outside, and therefore provide maximum grip, particularly when cornering where the tire is canted to the outside.Dimensions:Outer diameter: 170 mmTyre width: 60 mmContents:2 pieces / 1 pair Some off-road tires knowledge can be found here!

Neue, extrem verstärkte MadMax-Felge mit Wahlweise 18 mm Vierkantaufnahme oder 24 mm Sechskantaufnahme und optimierten orangen Felgenringen. 20-fach verschraubt, extrem robust, für alle 1:5/1:6er mit 18 mm oder 24 mm Felgenmitnehmer.Die MadMax Extreme Felgen sind wahlweise für 60 und 80 mm Reifenbreiten erhältlich! Sie werden jeweils mit einem optimierten Innen- und Außenring und 40 Stück 2,5 mm Innensechskantschrauben (für 2 mm Innensechskantschlüssel) sowie einem silbernen Verstärkungsring in der Felgenaufnahme geliefert. Unser Shop ermöglicht die Auswahl preisgünstiger Sets in jeder Version:y1415/01 ein Paar für ca. 60 mm breite Reifen mit 18 mm Vierkanty1415/02 ein Paar für ca. 80 mm breite Reifen mit 18 mm Vierkanty1415/03 je ein Paar für ca. 60 mm und 80 mm breite Reifen mit 18 mm Vierkanty1415/04 zwei Paar für ca. 60 mm breite Reifen mit 18 mm VierkantAuswahl 24 mm Sechskant:y1415/05 ein Paar für ca. 60 mm breite Reifen mit 24 mm Sechskanty1415/06 ein Paar für ca. 80 mm breite Reifen mit 24 mm Sechskanty1415/07 zwei Paar für ca. 60 mm breite Reifen mit 24 mm Sechskanty1415/08 je ein Paar für ca. 60 mm und 80 mm breite Reifen mit 24 mm Sechskant

The MadMax SUPERGRIP tires have been designed especially for use on tarmac. Even on fine-pored tarmac your car will still find enough grip! (As you can see in our video).On most 1/5 and 1/6 cars the best combination is the use of 60 mm wide front and 80 mm wide rear tires. The Losi 5ive-T Mini should run 60 mm wide MadMax SUPERGRIP tires all around, because the 80 mm wide SUPERGRIP tires are a bit too wide for the Mini body shell.The 80 mm wide MadMax tires are reinforced on the inside of the carcass with a special cross pattern in the tread section and ribs in the outside shoulder.MadMax SUPERGRIP tires are available in the following compounds: (embossed marking on the inside shoulder!)Breite:Soft:Medium:60 mm y1464/01y1464/0280 mm y1464/03y1464/04For running an rc-car on tarmac, the following recommendations apply:The dirtier the track or the colder the weather, the stickier (softer) the rear tires should be.A note for the front tires: 2WD cars should run slightly harder tires in front than in rear.On 4WD cars the same compound front and rear is usually a good choice!Of course, like in full scale motorsport it also applies to the MadMax SUPERGRIP tires that the softer the tire the higher the wear. The medium compound tire lasts significantly longer than the soft version!The MadMax SUPERGRIP has a special on-road tread. These tires have excellent grip even after eating up the tread and can be used after that for a long time as slicks! Some off-road tires knowledge can be found here!

inclusive:Product information "TT56112/520 Top Tuning Monster Brushless Motor 520kV"Genuine Top Tuning spare/option part.SpecificationsMax. amps: 129 AMax. voltage: 57 VMax. power: 7,350 WKV (RPM/Volt): 520 KVMounting hole depth: 8 mmBolt pattern: 4 x M4 at 30 mm pitch circle diameterCase diameter: 57.8 mmCase length: 112 mmFree shaft length: 30 mmShaft diameter: 8 mmWeight: 1260 gConnector: 6.5 mm diameterCable size: 8AWGFeaturesHigh quality bearings4Pole rotor with high quality magnetsStator - super thin silicon steel layersSuper strength 8 mm shaftCNC Aluminium heatsink caseCopper wires with high temperature enduranceContents:1 pieceandProduct information "HW3010420 Hobbywing Ezrun MAX5 HV G2 ESC 250 A, 6-12s LiPo, BEC 8A"The EzRun MAX5 HV G2 is an impressive brushless controller with high-voltage capability. With support for up to 12S LiPo and a maximum output current of 250A, it delivers explosive performance and outstanding linearity. Thanks to intelligent freewheel technology, the speed control remains relaxed and cool even during demanding driving manoeuvres.  This controller is protected against water and dust in accordance with the IP 67 standard. As a result, the MAX5 HV G2 is naturally suitable for use in all weather conditions and can be operated on various surfaces such as mud, sand, ice, snow and water without damaging the power unit. With a powerful integrated BEC, an anti-spark design and multi-directional protection, this controller offers advanced features and high safety. The EzRun MAX5 HV G2 is the ideal choice for RC enthusiasts looking for maximum potential and reliability. By recording and storing real-time data, the operating status can even be monitored. And the upgrade of the sensor cable interface greatly improves the protection and waterproof performance of the controller. With perfect compatibility with Hobbywing's EzRun 56118 SD G2 motor, this power system offers an unbeatable team for optimum performance and protection against overheating.Features - Now with even more power than its predecessor. - Water & dust proof for use in all weather conditions. - Built-in ultra-powerful switching mode BEC to drive a wide range of servos (high power / high voltage servo). - Turbo timing setting included. Especially recommended with the matching motor (e.g. EZRUN 56118SD G2). - Several protective functions: Battery undervoltage protection, controller and motor overheating protection, signal loss protection, current protection. - Supports LED programme card, LCD G2 programme box and the OTA programming module for easier setting of controller parameters. - Data logging function to display various running data in the HW LINK app using the OTA Bluetooth module. - Supports controller firmware upgrade (multifunction LCD-G2 programme box or OTA programming module required for purchase). - Capacitor capacity increased by 45%. - 12 adjustable parameters.technical Data :Type: 1/5 Brushless Sensored Current (continuous/short): 250A / 1600A Input voltage: 6-12S LiPo BEC: 6V/7.4V/8.4V @8A (switch mode) Motor types: Brushless motors (with/without sensor) Motor limits: - 8S Lipo: KV <= 1200 - 12S Lipo: KV <= 800 56118 motor Fan: Yes, operated via the BEC Programming: LED programming card LCD programming box (G2) OTA programming module Separate programming connection Waterproof: Yes Output: 8.00mm Bullet Connector (female) Size: 94.5x59.4x50.9mm Weight: 428.5g Applications: 1/5 buggy, truck Scope of delivery:  Ezrun MAX5 HV G2 ESCBUILD YOUR OWN ORIGINAL,AUTHENTIC HPI BAJA 5BHPI large scale fans, we have heard you! The one and only original HPI Baja 5B is BACK and ready for you to build from the ground up! The HPI SBK collection of Self Build Kits grows with the addition of not just one, but TWO 1/5th scale HPI kits! Fans of large scale off-road RC will be super excited to build their own gas-powered 1/5th scale Buggy with the HPI Baja 5B Self Build Kit!When the HPI Baja 5B buggy was first introduced, large scale RC was very expensive and quite difficult for the average RC hobbyist to experience. Using highly durable parts and innovative design features, HPI brought large scale off-road to new enthusiasts and ushered in a new, BIGGER era of RC!Now, YOU can build and own the legend! Experience the thrill and excitement of building a car which ends up being over 80cm (nearly 32 inches) long and weighing nearly 10kg (over 21 lb)! Just install your own engine and electronics as you build the HPI Baja 5B and you'll be ready for any adventure that comes your way!With extra-tough drivetrain parts like the viscous torque differential, super-durable composite spur gear with internal damping and all-metal drivetrain, the HPI Baja 5B is ready for your 23-32cc 2-stroke engine so you can experience the joy of gas-powered RC and up to 30-minute runtimes!The HPI Baja 5B is also equipped with extra-big and super-tough suspension parts, featuring awesome HPI durability! With its expertly designed molded composite suspension plus extra-long adjustable HD shocks, and massive high impact nylon 3-piece beadlock wheels, the Baja 5B is ready for full-speed racing on any off-road circuit!The 4mm thick 6061 aluminum monocoque chassis gives the HPI Baja 5B the classic desert racing buggy look. Precisely bent into shape for maximum strength, the chassis provides the mounting points for the engine and suspension, forming the backbone of the car. Precise steering is provided by a dual-bellcrank rack and cam-type servo saver. Aluminum parts are anodized in cool gunmetal and the classic Baja desert racer clear polycarbonate body is included in the SBK kit, ready for your custom racing scheme!The Baja 5B SBK is a great addition to your HPI collection, as well as a fabulous introduction to large scale buggies!RACING CHASSIS DESIGN & LAYOUTThe narrow channel chassis made from rigid 4mm 6061 aircraft aluminum and gives the HPI Baja 5B a classic desert racing buggy look and extreme stiffness and durability. The U-shaped chassis is protected at the rear with a thick plastic skid plate for extra protection to the motor and drivetrain.The tube roll cage is made of high impact nylon and topped with a real aluminum roof to carry on the classic looks. The roll cage is fully functional and protects the motor and internals from crash damage. The roll cage, radio box, body panels, wing, undertray and gear case are all mounted with fast access clips for easy maintenance.To finish you need:Engine with clutch and exhaustRemote control with servos and receiver batteryChargerTwo cans of Lexan paintFeatures SummaryUnassembled 1/5th scale electric-powered Off-Road BuggyStreamlined HPI Baja 5B Flux body designAdjustable motor mountAdjustable HD shock absorbersMonocoque chassisLow CG for superior handlingLong travel suspensionViscous torque oil-filled gear differentialAll-terrain tiresBeadlock wheels with metal insert hubsAluminum rear shock towerHard plastic skid platesAdjustable rear wingQuick access to all critical maintenance pointsDual bellcrank steeringCam type servo saverHex socket hardwareGunmetal anodizingFull set of rubber-sealed ball bearingsEnclosed receiver boxChassis SpecificationsOverall Length 817mmHeight: 255mmWidth: Front - 460mm; Rear - 480mmTire Track (to center of tires): Front - 395mm; Rear - 400mmWheelbase: 570mmRide Height: 76mmSuspension Travel: Front - 95mm; Rear - 100mmWeight: 9.6kg (21.3lb)Adjustable Camber: front - shims; rear - screwFront caster: adjustable with shim 22 / 25.5* / 29 degrees (* stock)Toe-in: Front adjustable with tie rod; Rear adjustable with inserts 0-4 degrees (3 degrees stock set-up)Aircraft aluminum 6061 T6 monocoque chassisDouble wishbone suspension with adjustable roll center F/RDrive system: HD metal gears with sealed gear box (8.382:1 gear ratio)Differential: viscous torque control with 4 pinion gears; sealed diff case with silicone oilShock absorber: HD Aluminum coilover shock absorber with fully adjustable preload collarWheel type: 3-piece beadlock design, high impact nylon material with inset heavy-duty metal hex hub