Skip to main content
EXTRA 20% off Outlet*. Use Code: EXTRA20 at checkout!!
+49 2151 820200 Mon-Fri 9 am - 6 pm, Sa 9 am - 1 pm

y0976 Alloy shock shaft end, long or short to choice

Product information "y0976 Alloy shock shaft end, long or short to choice"

y7087/01 Alloy shock shaft end short



Replaces FG 7087/01.

Fits all FG shocks, Carson 2WD and many other 1/5 and 1/6 scale models. Replaceable bushings.

Dimensions:
  • Length overall: 22,5 mm, about 17 mm to to center of bushing
  • Thread for shock shaft: M4
  • Bushing inner diameter: 4 mm


Contents:
  • 2 pieces





y7087/02 Alloy shock shaft end long



Genuine HT spare/option part.

Replaces FG 7087/02.

Fits all FG shocks, Carson 2WD and many other 1/5 and 1/6 scale models. There are replaceable bushings.

Dimensions:
  • Length overall: 27 mm, about 22 mm to to center of bushing
  • Thread for shock shaft: M4
  • Bushing inner diameter: 4 mm


Contents:
  • 2 pieces

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Alternatives

Average rating of 0 out of 5 stars

y7087/12 Replacement bushings for alloy shock shaft end
Genuine HT spare/option part. Dimensions:Inner diameter: 4 mm/li>Outer diameter: 5.5 mm/li>Width: 5 mmContents:4 pieces

€3.90*

Customers also bought

Average rating of 0 out of 5 stars

7095 FG Adjustable ring
Genuine FG spare/option part. Spare part for FG 7083.Dimensions:Thread M16x1Outer diameter 22.2 mmHeight 6 mmContents:2 pieces

€10.90*

Average rating of 0 out of 5 stars

7395/01 FG Carburetor support high for Zenoah G230/260/240/270 - set
This carburetor supoort sits beneath the air filter and prevents therefore widely arising vibrations.

€22.45*

Average rating of 0 out of 5 stars

y1528 Bearing puller for differentials
Genuine HT spare/option part. Bearing puller especially for the disassembly of ball bearings from differentials.The arms are reliably fixed at the set distance by an adjustment cone, which makes the use of this puller very easy. The thin hooks allow the use even with little space between ball bearing and differential.Dimensions: Min. opening width: 17 mm Max. opening width: 50 mm Max. height from the Clutch: 25 mmContents:1 piece

€19.90*

Average rating of 0 out of 5 stars

6079/05 FG Ball driving axle M8
Original FG Ersatz-/Tuningteil.Inhalt:1 Stück

€35.90*

Average rating of 0 out of 5 stars

7011 FG Front body mount
Genuine FG spare/option part. Fits FG Ecoline and Sportsline with the following body shells:2049 McLaren2064 Ferrarie 3604049 Audi A47164 ITC Mercedes7169 Peugeot7249 Mercedes CLK-DTM7254 Honda7259 Opel V88044 BMW 3201049 Ren. Megan5049 New Beetle5064 Chrysler Viper5154 Porsche GT25160 Porsche GT39149 Mercedes CLK-GTR9159 Porsche GT19054 Mercedes C291Contents:2 pieces

€6.90*

Average rating of 0 out of 5 stars

6732/07 FG E-clip spring steel 7 mm
Genuine FG spare/option part. Fits FG clutch bell and FG + Carson layshaft.Part is delivered in silver or black color from vendor!Content:15 pieces

€2.90*

Similar products

Average rating of 0 out of 5 stars

67336 FG Shock absorver protect le./ri. Leopard 2WD/4WD
Genuine FG spare/option part.Spare part for the Leopard 2WD/4WD 2010 versionContents:2 pieces

€8.30*

Average rating of 0 out of 5 stars

y7087/12 Replacement bushings for alloy shock shaft end
Genuine HT spare/option part. Dimensions:Inner diameter: 4 mm/li>Outer diameter: 5.5 mm/li>Width: 5 mmContents:4 pieces

€3.90*
%

Average rating of 0 out of 5 stars

TT0198 Top Tuning Bubble-Ex for 1/10 up to 1/5 scale rc-cars
Genuine Top Tuning spare/option part. Indispensable for optimal suspension tuning!Vacuum container for removal of bubbles from shock fluid when filling shocks.A vacuum pump is built into the lid. The tray has four holes each to accept 1/10, 1/8, 1/6 and 1/5 scale shocks.Suitable for shock absorbers from Losi, Mecatech, BWS, Arrma, Traxxas, FG, Carson, HPI and many more, as long as they have a suitable diameter. All shocks from 15 to 32 mm outer diameter can be used in the Bubble Ex to be "de-bubbled". Tray bore sizes: No. 1 = 32 mm diameter No. 2 = 21 mm diameter No. 3 = 17.5 mm diameter No. 4 = 15 mm diameter The maximum length of the shock absorber up to the upper edge of the body is about 150 mm, whereby longer shock absorbers can also be partially compressed for insertion. (e.g Losi 5ive-T and many more)Operation:Unlock the vacuum pump by turning it slightly to the left, the pump handle then extends a little. The small plug with handle is used to close and ventilate the container. To build up the vacuum, the plug must be in the down position.The small membrane on the opposite side serves as an indicator for whether a vacuum is present. Only when this is curved outwards the lid of the container can be opened again without any effort. Content: Can with integrated vacuum pump Shock tray

€49.90* €69.90* (28.61% saved)

Average rating of 0 out of 5 stars

y0514 GPM Shock-Cover for FG, Carson, Smartech, Conrad, set.
These protective covers prevent the shock piston rods and seals for wear caused by dirt. They fit most 1/6 and 1/5 scale shocks.Not suitable for Gas Devil, Thunderbolt, Helldevil, CRT 4x4!- total length 150 mm for all FG / Carson / Smartech / Conrad and all dampers with a diameter from 22 to 30 mm. Set of 4

€14.90*

Average rating of 0 out of 5 stars

y0041 Aluminum spring perches for Losi 5ive-T/2.0/B and Mini shocks
Genuine HT spare/option part.Aluminum spring perches for Losi 5ive-T/B and Mini shocks; with slot for fast and easy change of shock springs. Direct replacement for the stock plastic part.Contents:2 pieces

From €19.90*

Average rating of 0 out of 5 stars

y1335/01 Replacement clips for Suspension limiter Set
Genuine HT spare/option part. Replacement clips for Suspension limiter no.: Clips with 1,5 mm, 2 mm und 3 mm size included in the set. The clips fit shock shafts up to 4.5 mm diameter. Suitable for the following shock : y1137 GPM - Spezial Cross shocks (all versions) 2011 Mecatech Big Bore Shocks y1193 Mecatech Klick-Shocks, externally adjustable FG 6083/6084 shocks front / rear 66291/66292/66293 alloy shocks 08 67320/67330 alloy shocks for Leopard 2WD/4WD 7202/7203/7204 alloy shocks 04 305029/305030 shocks Comanche / Attack Evo 32488 Carson 1/5 front shocks 32574 Carson 1/5 rear shocks Cad shocks (all versions ) Package includes:6 clips 1.5 mm thick 6 clips 2 mm thick6 clips 3 mm thick

€8.20*

Average rating of 0 out of 5 stars

y0243 Tension adjustment clips
Genuine HT spare/option part. For easy, precise and equal adjustment of spring tension, fits all 1/5 and 1/6 shocks with a body diameter of 15 - 16 mm.Set with two clips each of 1, 2, 3, 4, 5 und 6 mm thickness.Contents:1 set

€3.95*

Average rating of 0 out of 5 stars

y0264 C-clips with handle 4 - 6 mm
clipse_griff Size: y0264/06 - 6 mm
Genuine HT spare/option part.Quick change clips for installation and de-installation without tools, galvanic zinc plated.Spring steel, hardened and tempered to 1450 to 1600 N/mm² tensile strength.Available for 4, 5 and 6 mm shafts.Contents:10 pieces

€4.90*

Average rating of 0 out of 5 stars

6484/01 FG O-ring for alloy shock absorber piston 14,8 mm
Genuine FG spare/option part. Suitable for 6484.Dimensions:12 x 1 mmContents:5 pieces

€3.10*

Average rating of 0 out of 5 stars

6484 FG Alloy shock absorber piston 14,8 mm
Genuine FG spare/option part. The exact rate of oil flow is determined by 5 borings. An o-ring reduces the friction between damper piston and damper housing.The five-unit Alloy shock absorber piston suitable for 6083, 6084, 6481 and 6482. For use with threaded shock shafts only!Dimensions:Thickness: 5 mmBore for shock schaft: 3 mmContents:2 pieces

€16.30*

Average rating of 0 out of 5 stars

y18005 HT-shock absorber quick mounts for Monster-Truck 2WD
Genuine HT spare/option part. Shock absorber quick mounts, for shock mounts and shock tower above. Sold in pairs. Contents:2 pieces

€19.90*

Average rating of 0 out of 5 stars

y1246, Hobbythek/GPM Dirt-Cover line for FG, Carson/Smartech and Conrad cars, set
Regular price: 51,80 EURhe set is suitable for all FG models + Carson/Smartech/Reely (not for FG Leopard + Carson Gas Devil, Hell Devil, CRT 4x4, Smartech Thunderbolt), please use order no. y1247.Content of delivery:- y0514 GPM Shock-Cover für FG, Carson, Smartech, Conrad- GPM Air filter cover, no. BJAFCO- GPM Starter cover, no. BJPSCO y0514 GPM Shock-Cover für FG, Carson, Smartech, ConradThese protective covers prevent the shock piston rods and seals from wear caused by dirt. They fit most 1/6 and 1/5 scale shocks. Not for Gas Devil, Thunderbolt, Helldevil, CRT 4x4!- total length 150 mm for all FG / Carson / Smartech / Conrad and all shocks with a spring diameter from 22 to 30 mm.Set of 4GPM Air filter cover, no. BJAFCOGPM air filter cover which fits easily over your existing air filter. A rubber band at the bottom holds the cover in place. Maintenance of the main filter will be significantly reduced, especially in very dusty environments. Fits all common filters, foam or fabric (K&N) style.GPM Starter cover, no. BJPSCO Keeps cool air coming to your engine by keeping dirt and grass from clogging up the pull starter area. Easily wipe off anything not deflected away. Installs on the starter cover with hook & loop tape. With metal cable management.When using the FG monster / stadium model is cut an additional hole for the support of the lateral support plate.

€39.50*
Loading...
Upload in progress, please be patient ...
Shopware-Theme Development Shopware-Plugin Development