24 products found for "y1444"

rc-car-online - Home

y1444 Mounting bracket for tuned pipe mufflers

Genuine HT spare/option part. Extra large bracket with wide surface allows for the use of two strong cable ties at the same time. You can even use a hose clamp at ones own discretion. The bracket comes with M5 lens flange head screw, nut and washer as well as with special temperature resistant cable ties. Content:BracketEach M5 screw, nylock nut and washer4 x temperature resistant cable tie 4,8 x 290 mm

€9.90*

y1445 MadMax Maxi Pin tyre, 1 pair

MadMax MAXI PIN tyres have been specially developed for carpet race tracks! The special block tread pattern, with 480 knobs per tyre, provides excellent grip, but also puts extreme strain on the tyre and the rim. To stabilise the tyre, the outside of the tyre shoulder is equipped with vertical ribbing on the side, which minimises tilting under load and counteracts the shear forces that occur in bends. Furthermore, the MAXI PIN tyres have knobs positioned on the side of the outer side, which particularly support the steering behaviour of your RC car in bends. Taken together, the MAXI PIN tyres provide maximum grip. Dimensions: Outer diameter: 185 mm Tyre width at the outer edge of the tread: 75 mm 1 pair

€29.90*

y1441 Audi RS5 DTM clear

Audi RS5 DTM clear body shell for 1/5 cars with 530/535 mm wheelbase.The set includes main section and front air dam as well as the required special screws.The body shell does not come with drilled mounting holes to make it possible to fit any 1/5 car with 530/535 mm wheelbase.Rear wing, side flaps/winglets and several decal sets are available from the options menu.The front section is also available separately as a spare part with part number y1441/01.This Audi RS5 DTM body shell is also available fully painted with either Team Audi Ultra (y1441/06) or Team Jägermeister (y1441/07) design.Required body mounts:Mount front: FG 7020/14 Front bumper Rear body mount: FG 7152/01 Rear body mount Side body mount front: FG 3014 Body mounts Side body mount rear: FG 3014 Body mounts / for 4WD: FG 7014/02 Body mount

€239.90*

y1434 VL32 Multi Oil Pen for RC-Car sport

Universal maintenance oil which has a high resistance to environmental influences; it is penetrating and moisture displacing with an excellent corrosion protection. Precise application is possible with the VL32 - Multipen's metal syringe tip. The ergonomic shape and rubberized handle provide a secure grip. Leakage of oil is prevented by the safety valve in the cap. Application: u> b>Pull off cap (avoiding strong pressure on the pen!), position the pen to the point of lubrication and press. Refit cap after use.Content:12 ml / 1 piece

Content: 12 Milliliter (€741.67* / 1000 Milliliter)

€8.90*

y1440 Team Decals Post for BMW M3 ALMS

Team decal sheet, suitable for BMW 320si body shells with the order numbers: y1437.Team decal sheet includes the following manufacturers: Deutsche Post, Hankook, Sonax, Castrol, EDGE, Zollner, Sachs, Allgeier, H&R, Exide, GNB. Dimensions:Big decal sheet: 390 x 200 mmPost logo for the roof: 210 x 145 mmM3 rear wing lettering: 250 x 36 mmStripes: 400 x 73 mm

€34.90*

y1442 Audi RS5 DTM car specific decal set

Car specific decal set for y1441 Audi RS5 DTM body shell.

€19.95*

y1044 Y-connector for hydr. brake system - 1 pce

Y-connector for all hydraulic brake linings with a outside diammeter of 4mm. e.g Colari, Magura II and Mecatech.

€14.90*

y1344 GPM Air filter cover for Losi Desert Buggy XL/2.0

GPM air filter cover which fits easily over your existing air filter. A fastening band band at the bottom holds the cover in place. Maintenance of the main filter will be significantly reduced, especially in very dusty environments.

€13.30*

y1544 LiPo CellMeter 3 in 1 Tester, balancer and discharger, with servo tester

Genuine rc-car-online spare/option part. Compatible with up to 8S lithium batteries. In addition to the LiPo Tester, the CellMeter also has a built-in servo tester. This makes it possible to check at any time whether the servos are working properly.Technical data:High visibility LCD displayBalancer functionDischarge functionVery accurate battery checkSuitable for Li-Ion, LiPo, LiFe, LiHv, NiCd, NiMh batteries (up to 8 cells)Battery type and Zellenanzahl will be recognized automaticallyVoltage displayed individually for every cellWeight: 48gDimensions LxWxH: 84 mm x 52 mm x 15 mmContents:1 piece

€21.90*

y1474 Aluminum foil tape, self-adhesive, 50 mm x 45 meters

Genuine HT spare/option part.50 mm wide, self-adhesive aluminum foil tape, especially for heat insulation; i.e. between tuned pipe and plastic or electronic components.Content:1 piece / 45 meters

€9.90*

y1449 Molded tire inserts green for 170 mm Ø HPI + Losi tires with 60/75 mm width

Medium firmness molded tire inserts with shaped shoulders and recesses to match the beadlock fittings.The medium shore hardness compound of the green colored top quality tire inserts provides optimal support for the tire's shoulder and allows for perfect rolling characteristics of the tire. The perfect tire insert for the HPI-Baja 5B series with 170 mm tire diameter is available in two widths.Replacement part for MadMax Multi Pin and Giant Grip tires.

€19.90*

y1444/01 Temperature resistant cable ties 4,8 x 290 mm

Genuine HT spare/option part. Particularly advantageous for installation of tuned pipe exhausts. Content:20 pieces

€4.95*

y1464 MadMax SUPER GRIP 170x80/x60 replacement wheels

The MadMax SUPERGRIP tires have been designed especially for use on tarmac. Even on fine-pored tarmac your car will still find enough grip! (As you can see in our video).On most 1/5 and 1/6 cars the best combination is the use of 60 mm wide front and 80 mm wide rear tires. The Losi 5ive-T Mini should run 60 mm wide MadMax SUPERGRIP tires all around, because the 80 mm wide SUPERGRIP tires are a bit too wide for the Mini body shell.The 80 mm wide MadMax tires are reinforced on the inside of the carcass with a special cross pattern in the tread section and ribs in the outside shoulder.MadMax SUPERGRIP tires are available in the following compounds: (embossed marking on the inside shoulder!)Breite:Soft:Medium:60 mm y1464/01y1464/0280 mm y1464/03y1464/04For running an rc-car on tarmac, the following recommendations apply:The dirtier the track or the colder the weather, the stickier (softer) the rear tires should be.A note for the front tires: 2WD cars should run slightly harder tires in front than in rear.On 4WD cars the same compound front and rear is usually a good choice!Of course, like in full scale motorsport it also applies to the MadMax SUPERGRIP tires that the softer the tire the higher the wear. The medium compound tire lasts significantly longer than the soft version!The MadMax SUPERGRIP has a special on-road tread. These tires have excellent grip even after eating up the tread and can be used after that for a long time as slicks! Some off-road tires knowledge can be found here!

From €29.90*

Details

y1441/03 Audi RS5 DTM Flaps/winglets

Fits Audi RS5 DTM body shell.

€22.90*

y1441/04 Audi RS5 DTM Rear wing mounts

Fits y1441/02 Audi RS5 DTM body shell rear wing and many other rear wings.Contents:2 pieces

€12.90*

y1441/01 Audi RS5 DTM replacement front section

Fits y1441 Audi RS5 DTM body shell.

€39.50*

DYN1444 Dynamite 6V 3000mAh Ni-MH 5-Cell Flat Receiver Pack

Genuine Losi spare/option part.Features:Extremely affordable high-capacity receiver packs for higher-current-drain RC vehicles. Increased run times over standard receiver packs. Universal connector plugs directly into the switch harness for all radio systemsDimensions:Width: 112 mmHeight: 46 mmDepth: 23 mm

€34.99*

Details

y1446/01 MadMax MAXI PIN tires for Losi and HPI (24 mm hex drive)

MAXI PIN 185 x 75 with black colored MadMax Extreme rims, 20-fold screwed, very tough, with 24 mm hex drive and with reinforced orange beadlock rings for Losi and HPI. The MadMax MAXI PIN tires come with strong special tire inserts which allow transferring the power without canting, even on heavy cars. MadMax MAXI PIN tire was developed specifically for astro turf tracks! The special tread design with 480 studs per tire provides excellent grip, but also a high load on tire and rim! To stabilize the tire, the outer shoulder features radial ribs which minimizes the tilting under load and counteract the shear forces during cornering. Furthermore, the MAXI PIN tire has studs positioned on the outside shoulder, which support the steering in corners. All together the MAXI PIN tires provide maximum grip, which made it necessary to upgrade the beadlock screws on these MadMax EXTREME wheels. So they come with 3.0 mm screws instead of the usual 2.5 mm ones! Nevertheless, tires and beadlocks should be checked after every run. Dimensions: Outer diameter: 185 mm tire width at bead: 70 mm Tread width: 75 mm Reinforced 24 mm hex wheel drive Contents:2 pairs / 4 pieces Some off-road tires knowledge can be found here!

From €129.90*

Details

y1445/01 MadMax MAXI PIN tires for FG/Smartech & Co (18mm wheel square) Offer

MAXI PIN 185 x 75 with black colored MadMax Extreme rims, 20-fold screwed, very tough, with 18 mm square drive and with reinforced beadlock rings for FG, Smartech and many more. The MadMax MAXI PIN tires come with strong special tire inserts which allow transferring the power without canting, even on heavy cars. MadMax MAXI PIN tire was developed specifically for astro turf tracks! The special tread design with 480 studs per tire provides excellent grip, but also a high load on tire and rim! To stabilize the tire, the outer shoulder features radial ribs which minimizes the tilting under load and counteract the shear forces during cornering. Furthermore, the MAXI PIN tire has studs positioned on the outside shoulder, which support the steering in corners. All together the MAXI PIN tires provide maximum grip, which made it necessary to upgrade the beadlock screws on these MadMax EXTREME wheels. So they come with 3.0 mm screws instead of the usual 2.5 mm ones! Nevertheless, tires and beadlocks should be checked after every run. Dimensions: Outer diameter: 185 mm tire width at bead: 70 mm Tread width: 75 mm Reinforced 18 mm square wheel drive Some off-road tires knowledge can be found here!The video shows the 18 mm square drive version. Also available with 24 mm hex.

From €129.90* €149.90* (13.34% saved)

Details

y1441/06 Audi RS5 DTM body shell, painted, Team Audi-Ultra paint theme

Painted Audi RS5 DTM body shell with Team Audi-Ultra paint sheme for 1/5 cars with 530/535 mm wheelbase.With rear wing, flaps and decal sets for car and Audi Ultra paint sheme.This Audi RS5 DTM body shell is also available clear with part number y1441.Required body mounts:Mount front: FG 7020/14 Front bumper Rear body mount: FG 7152/01 Rear body mount Side body mount front: FG 3014 Body mounts Side body mount rear: FG 3014 Body mounts / for 4WD: FG 7014/02 Body mount

€299.90*

y1441/07 Audi RS5 DTM body shell, painted, Team Jägermeister paint theme

Painted Audi RS5 DTM body shell with Team Audi-Jägermeister paint sheme for 1/5 cars with 530/535 mm wheelbase.With rear wing, flaps and decal sets for car and Jägermeister paint sheme.The body shell does not come with drilled mounting holes to make it possible to fit any 1/5 car with 530/535 mm wheelbase.This Audi RS5 DTM body shell is also available clear with part number y1441.Required body mounts:Mount front: FG 7020/14 Front bumper Rear body mount: FG 7152/01 Rear body mount Side body mount front: FG 3014 Body mounts Side body mount rear: FG 3014 Body mounts / for 4WD: FG 7014/02 Body mount

€269.90*

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

y1446/01 MadMax MAXI PIN tires for Losi and HPI (24 mm hex drive) Offer

From €129.90* €149.90* (13.34% saved)

Details

y1441/02 Audi RS5 DTM polycarbonate rear wing with mounts

Genuine HT spare/option part. Fits Audi RS5 DTM body shell.Dimensions: Length: 325 mmWidth: 60 mmDistance between mounting holes: 130 mmMaterial thickness: 2 mm Contents:1 piece

€24.90*

y1445/01 MadMax MAXI PIN tires for FG/Smartech & Co (18mm wheel square)

MAXI PIN 185 x 75 with black colored MadMax Extreme rims, 20-fold screwed, very tough, with 18 mm square drive and with reinforced orange beadlock rings for FG, Smartech and many more. The MadMax MAXI PIN tires come with strong special tire inserts which allow transferring the power without canting, even on heavy cars. MadMax MAXI PIN tire was developed specifically for astro turf tracks! The special tread design with 480 studs per tire provides excellent grip, but also a high load on tire and rim! To stabilize the tire, the outer shoulder features radial ribs which minimizes the tilting under load and counteract the shear forces during cornering. Furthermore, the MAXI PIN tire has studs positioned on the outside shoulder, which support the steering in corners. All together the MAXI PIN tires provide maximum grip, which made it necessary to upgrade the beadlock screws on these MadMax EXTREME wheels. So they come with 3.0 mm screws instead of the usual 2.5 mm ones! Nevertheless, tires and beadlocks should be checked after every run. Dimensions: Outer diameter: 185 mm tire width at bead: 70 mm Tread width: 75 mm Reinforced 18 mm square wheel drive Some off-road tires knowledge can be found here!The video shows the 18 mm square drive version. Also available with 24 mm hex.

From €129.90*

Details