Genuine HT spare/option part. Steering centerlink, very strong, does not bend.The stock high socket ball / M3 bolt will be replaced with a standard unit / M4 bolt without the unnecessary leverage.Standard plastic bushings and a spacer (used as an axle) replace the expensive proprietary bolts and bushings from the stock part. Rebuilding the bearings becomes cheap and easy with this centerlink.All parts included.Contents:1 piece
Genuine Champion spare/option part.OEM spark plug for Zenoah G230/240/260/270/290/320.Ideal too for PT, Chung Yang, Losi, HPI-Fuelie, Smartech, Nutech and Carson and other engines.The most widely used, qualitatively best spark plug for the model sport! Especially by the most 1/6 scale models the short ceramic body is indispensable, because otherwise on grounds of the heightened mounting position- the spark plug would protrude beyond the roll cage and therefore is extremely fragile by flashovers.Contents:3 pieces
Genuine HT spare/option part. Ball & socket tool with t-handle, special version for the ball joints.Fits Losi 5ive-T. 5ive-B, Desert Buggy XL, Desert Buggy XL-E, Monster Truck XL and the HPI Baja 5B and Baja 5R Ford Mustang.Contents:1 piece
Cap screws for 1/5 & 1/6 large scale cars, DIN 912 - 8.8 M5x16 with corresponding external tooth lock washers DIN 679A.The lock washers prevent loosening of the manifold screws.Bag with five each screws and lock washers.Part is delivered in silver or black color from vendor!
Genuine HT spare/option part. Replacement part to number y0987.Sprongerubber plug for volume compensation piston in GPM Special-Cross and FG Evo shocks. The elements must be glued on using instand adhesive.Contents:2 pieces
Original HT Ersatz-/Tuningteil.Replacement part to number y0987.O-ring for volume compensation piston in GPM Special-Cross and FG Evo shocks, 2 pcs.Dimensions:Outside diameter: 12 mmStrength: 1 mmOutside diameter: 10 mmContents:2 pieces
Double-DVD set with commentaries in English language. This video covers the IFMAR World Championship Warm Up Race (May 2005) in Lostallo/ Switzerland. All top drivers likeCollari, Feldmann, Oddie and many more make this race some kind of a pre-world-championship(DVD-video, system: PAL, region code free, total run time: approx.. 200 minutes, sound: MPEG-stereo, aspect ratio: 4:3)
y7092 Alloy spring retainer, smallGenuine HT spare/option part.Alloy spring retainer, replaces FG 7092 or Carson 32556.Fits all FG shocks with 16 mm body and all Carson / Smartech 2WD and many other 1/5 and 1/6 scale models. Dimensions:Retainer diameter: 23 mmAccepts springs with approx. 16 mm inner diameterSlot for 4 mm shock shaftContents:2 piecesy6092 Alloy spring retainer largeGenuine HT spare/option part.Alloy spring retainer, replaces FG 6092.Fits all FG shocks with 20 mm body (OEM shocks on all FG buggy / monster / stadium models and tuning shocks 6481 / 6482) and many other 1/5 and 1/6 scale models. Dimensions:Retainer diameter: 25 mmAccepts springs with approx. 20 mm inner diameterSlot for 4 mm shock shaftContents:2 pieces
23 cc Zenoah engine for large scale cars!The engine will be delivered with pull starter, carb and spark plug / spark plug cap. Genuine Zenoah air filter and / or complete clutch and / or ball beard carburetor are optionally available at additional charge.Compatibility Zenoah / Losi 5ive-T:Please note that for installation in a Losi 5ive the fan cover must be swapped for a Losi or CY cover #5341 in order to fit the chassis" bolt pattern.If you want to install a Zenoah engine into the Losi 5ive, you usually have to use a fan cover from the CY engine.However, there is a workaround to maintain Zenoah fan cover.The adjustment is done via the pinion specific mounting plates for the engine. The change always affects only the rear, outer (carburetor side) plate under the fan cover. This is rotated by 180°; so that the embossed number on this plate faces the exhaust side of the engine!18T pinion: use 20T plate, rotated 180°19T pinion: use 19T plate, rotated 180°20T pinion: use 18T plate, rotated 180°On the plus side you gain the opportunity to easily mount a Zenoah engine keeping the original fan cover. On the other hand there will be the disadvantage of the necessity to combine two different sets of engine mounting plates when installing any pinion other than the stock 19T version. Therefore we do not recommend this workaround for everyday use. Nevertheless it works perfectly should ever the need arise. Attention! We recommend to run exclusively fully synthetic 2-stroke engine oil, like y0813 Motul 800 racing oil.