23 products found for "y0785"

Catalogue #1

y0789 Chassis mud flaps for Losi 5ive-T/2.0

Chassis mud flaps for the Losi 5ive-T, made of 1.0 mm extremely durable plastic material. The mud flaps are precisely contoured to follow the 5ive-Ts roll cage and body shell. Die-cut and ready for installation featuring 15 eyelets in 3 different sizes and 4 each form and hole punchings to fit the roll cage brackets. The set also includes complete hardware for installation and an illustrated manual! Dimensions of mud flaps (laying flat): 930 x 135 mm Set includes: 2 x protective cover (right and left) 6 x cable clip 14 x fixing screws 12 x washers 1 x manual

€49.90*

y0784/03 Audi A4 body shell with silver painting

Defects:Some glue remainingson the window frame.Small cut in the left fenderl. The body shell shows several signs of wear (see pics).Measurements:Lenght: 890mmWidth: 380mmHeight: 250mmWheel base: 535mm

€219.90*

y0780 RC-Car Comfort relax chair / camp-chair

Extremely rugged steel construction with comfortable, one piece seat and back rest Premium version made of coated 22 mm diameter steel tube, with horizontal folding mechanism and black, back-supporting and tear-resistant high quality upholstery fabric. Back rest with printed RC-Car logo on both sides. Padded black fabric armrests.Unfortunately, due to the folding mechanism and the bulky storage of these chairs, some scratches on the steel pipe are inevitable! Dimensions, folded: Length: 80 cmWidth: 50 cmHeight: 7 cm Dimensions set up:Total height: 80 cmSeat height 47 cm Seat:Width: 50 cmDeep: 40 cmWeight: 4.4 kg

€39.90*

y0782/03 burnished M8 steel turnbuckles - 66 / 84 mm

gewinde_0005_02 Length: 66226B 84 mm

Genuine FG spare/option part.Burnished M8/M10 steel turnbuckles.Contents:2 pieces

€17.90*

y0784/138 Painted Stadium Jeep body shell Camouflage

Defects:The body shell has several small scratches.Dimensions: Length approx. 670 mm Width approx. 300 mm Height approx. 225.mm Wheelbase approx. 470 mm

€259.90*

y0781 Dry-Fluid Extreme especially for RC-Cars, 20 ml

Dry lubricant instead of oilWe did not think that today its still possible to make a real improvement in lubricants!DryFluid Extreme is especially designed for remote control model cars, with the aim to maintain the functionality and durability of these little racers as long as possible or to even extend significantly.The effect of the new lubricants for shafts, bearings, guides and ball joints starts where other lubricants reach their limits. Low friction, high lubricity and minimal attractivity to dust or dirt were the main developmental targets. Recent findings in aerospace and automotive technology as well as the experience of RC car drivers are the mentors of innovation of this new lubricant.What is DryFluid Extreme RC-Cars?DryFluid lubricant is more of a solid lubricant than a classic fluid one. DryFluid is not a wax, not oiling, non-greasy and free of silicones. The use of dry particles, polymer lubricants and high-end lubricating fluids results in a previously unknown lubricity without binding dust and dirt. Ease of application and long-term effects of DryFluid Extreme will delight any modeler.DryFluid Extreme product featuresReduces the power losses of shafts, bearings and ball joint systems and guarantees a long life of the treated componentsLowest friction for smooth operation and wear reductionMultistage lubricant system with immediate and long-term lubrication effectsDoes not bind any dust or dirtExtremely good penetrating abilityHighest compatibility with all common materials like metals, plastics and rubberExcellent adhesion and corrosion protection propertiesThe use of DryFluid Extreme RC-CarsThe main effect of DryFluid Extreme is the reduction of friction and wear on shafts, bearings, guides and ball joint systems. The dry components do not bind any dust or dirt and ensure best possible long term lubrication effects.For best results the parts to be treated should be thoroughly cleaned and the fluid applied sparingly. Repeated use increases the long-term effect.Before use, shake bottle vigorously for a short time!Nanotec lubricant for joints, shafts, bearings and gears of rc-cars. Excellent long term lubrication effects. Use included put-on canula for fine dosing. Let dry for several minutes after application and close bottle tightly. Shake well before use Attention:Keep out of reach of children. Do not swallow. Avoid contact with eyes. Keep away from ignition sources. Keep bottle closed tightly.

Content: 20 Milliliter (€845.00* / 1000 Milliliter)

€16.90*

y0784/31 BMW E46 body shell with Mafia team decals

Flaws:The paint flakes off at several points on body shell, mirrors or door handlesOne hole for the body mount is tornRequired body mounts:Mount front: Rear body mount:Side body mount front: Side body mount rear: Measures:Length: 890 mmWidth: 392 mmHeigth: 245 mmWheelbase: 530 mm

€269.90*

y0782 Electrogalvanized M8 steel turnbuckles - all lengths, 2 pcs.

gewinde_0005 Length: 6100/04 40 mm+ 1.2EUR

Electrogalvanized M8 steel turnbuckles right/left available in different lengths.Order no.Length:6100/03M8 left/right36 mm6100/04M8 left/right40 mm7076/01M8 left/right54 mm6076/01M8 left/right61 mmy0988M8 left/right75 mmThe 75 mm version is especially for installation of HT upper rear alloy a-arms in Carson Comanche, Attack Evo, CRT + CPT cars.

Variants from €9.90*

€11.10*

y0784/23 Seat Toledo body shell with Repsol painting One of a kind

Defects:The color of the bodywork has been slightly altered by exposure to the sun in the window dressing (see photos).Fits 535 wheelbase

€390.00*

y0782/01 Electrogalvanized M8/M10 steel turnbuckles - all lengths, 2 pcs.

gewinde_0005_01 Length: 108 mm, 67267+ 5.4EUR

Electrogalvanized M8/M10 steel turnbuckles right/left available in different lengths.Order no.Length:66267M8 right / M10 left66 mm66226M8 right / M10 left84 mm67267M8 right / M10 left108 mm

Variants from €21.05*

€25.30*

y0784/35 Porsche GT3 RSR, white with Casino / Lucky Seven team decals

Required body mounts:Mount front: Rear body mount: Side body mount front: Side body mount rear: Measures:Length: 890 mmWidth: 405 mmHeight: 240 mmWheelbase: 510 mm

€349.90*

y0783 LiPo battery 3S/4000 mAh 11,1 V 45C/80C, 1 pce

Battery pack, suitable for FG electric models (two packs required).The housing of the cell is made of aluminum-plastic. High-performance LiPo battery for applications with high discharge rates.High power ratings guarantee excellent performance: continuous discharge rate 45C, burst rate 80C and charge rates of up to 5C.Only carefully selected cells are soldered together into a pack. Specifications: Cells: 3S Voltage: 11.1 V Capacity: 4000 mAh Length: 137 mm Width: 44 mm Height: 29 mm Weight: approx. 360 grams Continuous discharge rate: 180 A Burst discharge rate: 320 A Charging current: 5.0 ... 25.0 A XHP balancer connector, with XHP / EHR adaptor cable

€99.90*

y0781/01 Dry-Fluid "Gear Lube" for gears, 10/20 ml

y0781_01 Size: y0781/20 - 20 ml+ 8.1EUR

Dry lubricant instead of oil DryFluid Extreme Gear Lube is specifically designed for highly loaded gears in models. It is characterized by extreme pressure resistance and excellent adhesion. Through the use of solid lubricant components, it shows only a slight tendency for dust and dirt retention. Main applications of the newly developed Gear Lube Gear are of model helicopters, rc-cars and trucks, model trains and servos. Also ideally suited for shafts and gimbals of any kind.DryFluid lubricant is more of a solid lubricant than a classic fluid one. DryFluid is not a wax, not oiling, non-greasy and free of silicones. The use of dry particles, polymer lubricants and high-end lubricating fluids results in a previously unknown lubricity without binding dust and dirt. Especially the long-term effects of DryFluid Extreme will delight any modeler. Product characteristics at a glance: Exciting lubricating propertiesReduces power losses caused by friction Reduces operating noise Reduces wear Extremely pressure resistant Long-term stability Highest adhesion High material compatibility with metals, plastics and rubber materials Low tendency for dust and dirt binding Application Notes: A thin layer of the Gear Lube is enough for an extreme lubricating effect. If possible, apply to an upright standing gear and rotate it during the application. For hard to reach places and selective applications use the included canula. For fine and uniform distribution use a fine hair brush immediately after the application of Gear Lube. Transmissions that have not been treated with Gear Lube before should be thoroughly cleaned first. Shake well before using and apply sparingly!High End dry lubricant for highly loaded gears in models. Especially for transmissions of model helicopters, rc-cars, trucks, model trains and servos. Can also be used for shafts and gimbals of any kind Through the use of dry particles, lubricating polymers and high-end lubricating fluids an unprecedented lubricating effect is achieved. Extremely pressure-resistant and with excellent adhesion. Very low tendency for dust and dirt retention. Multistage dry lubricant system with long-term effects.

Content: 10 Milliliter (€2,500.00* / 1000 Milliliter)

Variants from €16.90*

€25.00*

y0285 Accelerator - 1pce.

Item N° y0285 Accelerator - 1pce.For all tire adhesives above,150 ml spray canAccelerator-spray is the second component to cure superglue immediately.Advantages:Tangible adhesion after a few seconds Aromatic solvents and hexane free Suitable for hobby, craft, industry and household. Processing:Clean the surface thoroughly. Apply accelerator at room temperature on both surfaces to be bonded until a clear liquid film appears. Air out the applied accelerator, then apply the superglue as usual.

Content: 150 Milliliter (€66.00* / 1000 Milliliter)

€9.90*

y0685 Zenoah banner

Digitally printed banner sheet with four eyelets for mounting. Edges are hemmed and double stitched for increased strength.Size:Width: 180 cmHeight: 100 cm

€39.90*

DLD Maxi Blockpass, 1 pair, y0085

y0085 Mounted/glued: Tires with inserts glued on FG rims+ 54.5EUR

DLD Maxi Blockpass offroad tire, fits FG Marder/Leopard/Beetle/Monster models, diameter 155 mm, width 60 mm, hard rubber compound.

Variants from €41.00*

€95.50*

y0758 Special exhaust manifold screw set, 5 pcs.

Cap screws for 1/5 & 1/6 large scale cars, DIN 912 - 8.8 M5x16 with corresponding spring washers DIN 127.The spring washer's tension prevents loosening of the manifold screws.Bag with five each screws and spring washers.Part is delivered in silver or black color from vendor!

€3.90*

y0735 Safety clip for Universal / JR / Futaba connectors

Genuine HT spare/option part. Protects the mated connection to prevent them from coming apart accidentally. Particularly recommended for direct power supply cords, as a tensile load on the cable can remove the link unnoticed and then you would perhaps think of a servo failure in the first place.The small size usually allows the installation even inside the receiver box.Also suitable for securing the connection of the receiver battery; the use of this clip means a big improvement in safety with little effort.Contents:1 piece

€1.50*

y0085/01 PMT DLD Maxi Blockpass competition tyres

y0085_01 Mounted/glued: Tires only

Genuine PMT spare/option part. PMT DLD Maxi Blockpass offroad tire, fits FG Marder/Leopard/Beetle/Monster models, diameter 155 mm, width 60 mm, hard rubber compound.Contents:1 piece

€24.90*

y0715 rc-car-online High tech mechanics gloves, nitrile, black

Genuine HT spare/option part. With non-slip surface perfect for delicate work, actually improving dexterity and grip.Available sizes: 8, 9 and 10.Glove size?Size 8 = 21 cm (S - L) circumferenceSize 9 = 24 cm (L - XL) circumferenceSize 10 = 27 cm (XL - XXL) circumferenceMeasure the circumference of your hand without the thumb and at the widest point (above the ankle). The tape measure should embrace the hand loosely.Norm EN388, Lining 100% polyamide.Partially coated with hightech nitrile Fits like a second skinGrips even when wetGood touch sensitivityLiquid-repellentGood resistance against oil and greaseContents:1 pair / 2 pieces3 pairs / 6 pieces

€8.90*

y0795/02 SPEED TEC 5ive-T original 26er COMPETITION tuning engine

The SPEED TEC COMPETITION genuine 5ive-T engine is optimized for performance with sophisticated craftsmanship and guarantees, besides greatly increased performance, excellent workmanship and stamina. SPEED TEC COMPETITION version modifications: Cylinder: Adjustment of compression; enlarged ports, fuel management milled, machined and polished exhaust and intake, the case is specially matched with enlarged and polished cross section towards the ports, oil holes for optimized lubrication of the crankshaft bearings. Piston: weight reduced; skirt shortened; oil rings, piston above and below piston ring tapered and piston dome polished. Crankshaft: is adjusted, aligned and balanced, high quality Fluon shaft seals and Top Drag Seals installed. Flywheel: weight reduced and checked for runout.Insulator:mounted SPEED TEC tuning insulator. Gaskets: use of premium quality gaskets.To achieve the optimum performance gain of a SPEED TEC COMPETITION engine, we recommend the use of a tuned pipe ( to the tuned pipes ).

€699.00*

y0795 SPEED TEC 5ive-T original 26er EXPERT tuning engine

The SPEED TEC EXPERT genuine 5ive-T engine is optimized for performance with sophisticated craftsmanship and guarantees, besides greatly increased performance, excellent workmanship and stamina. SPEED TEC EXPERT version modifications: Cylinder: Adjustment of compression; enlarged ports, fuel management milled, machined and polished exhaust and intake. Piston: weight reduced; skirt shortened; oil rings, piston above and below piston ring tapered and piston dome ground. Crankshaft: is adjusted and aligned. Flywheel: weight reduced and checked for runout. Gaskets: use of premium quality gaskets.To achieve the optimum performance gain of a SPEED TEC EXPERT engine, we recommend the use of a tuned pipe (to the tuned pipes).

€599.00*

y0795/01 SPEED TEC EXPERT 5ive-T original 26 cm³ tuning cylinder set

Race ported top end set for the original 5ive-T 26 cm³ engine.The SPEED TEC EXPERT genuine Zenoah G260 race ported top end set is optimized for performance with sophisticated craftsmanship and when accurately installed - guarantees, besides greatly increased performance, excellent workmanship and stamina. SPEED TEC EXPERT version modifications: Cylinder: Adjustment of compressionEnlarged portsFuel management milledModified exhaust and intake Piston: Weight reducedSkirt shortenedOil ringsPiston above and below piston ring tapered and piston dome ground The set includes the following items: Performance-optimized cylinder and piston, piston ring, piston pin, piston pin circlips and cylinder gasket.To achieve the optimum performance gain of a SPEED TEC EXPERT top end set, we recommend the use of a tuned pipe.Each SPEED TEC Tuning cylinder set comes with a small amount of a spec. assembly lube for the installation of piston and piston ring. This spec. lube provides the required lubrication to the engine for the first start and dissolves without residue!

€229.90*