23 products found for "y0515"

Catalogue #1

y0515 GPM Shock-Cover for Carson Wild GP Attack, HPI Baja, Super Baja Rey, Super Rock Rey, Gas Devil, Hell-Devil, CRT 4x4, Thunderbolt

Genuine GPM spare/option part. These protective covers prevent the shock piston rods and seals for wear caused by dirt. They fit most 1/6 and 1/5 scale shocks.Does not fit FG, Carson (thin shocks) , Smartech, Conrad!Suitable for all Carson Wild GP Attack, HPI Baja, Hell-Devil, Super Baja Rey, Super Rock Rey, Gas Devil, CRT 4x4, Thunderbolt and all shocks with a diameter from 26 to 40 mm. Please note that the shocks shown in the picture are for presentation purpose only and not included.Contents:2 pieces length 160 mm 2 pieces length 180 mm

€14.90*

y0518 Hobbythek service bag

Genuine HT spare/option part. Special fabric bag to protect engines, rc-plates or other expensive items. Large opening and pull-string closure.Size:Diameter 200 mmHeight 200 mmContents:1 pieceAccessories not included.

€6.50* €7.90* (17.72% saved)

y0513 GPM Set No. 13, Clutch bell, Steel pinions 17T and 18T

Complete set with clutch bell and one each 17T and 18T steel pinion.GPM clutch bell with 5 mm pinion bolt. CNC-machined one-piece bell for absolute true running. Inclusive mountings.GPM 17T and 18T steel pinions are profile regraded. This allows for a change in gearing by a pinion swap alone.Module: m=1,5Profile regraded means that the number of teeth is changed while the diameter remained constant. The part of the involutes? curve that defines the tooth profile is changed. Positively regraded (lower number of teeth) pinions are stronger and run smoother, the reduced strength of negatively regraded pinions doesn?t really matter.Content of delivery:GPM steel clutch bell SBJ613GPM steel pinion 17T SBJ017TGPM steel pinion 18T SBJ018TO

€89.90*

y0513/01 GPM Set Clutch bell, Steel pinions 16T and 18T

Complete set with clutch bell and one each 16T and 18T steel pinion.GPM clutch bell with 5 mm pinion bolt. CNC-machined one-piece bell for absolute true running. Inclusive mountings.GPM 16T and 18T steel pinions are profile regraded. This allows for a change in gearing by a pinion swap alone.Module: m=1,5Profile regraded means that the number of teeth is changed while the diameter remained constant. The part of the involutes? curve that defines the tooth profile is changed. Positively regraded (lower number of teeth) pinions are stronger and run smoother, the reduced strength of negatively regraded pinions doesn?t really matter.Content of delivery:GPM steel clutch bell SBJ613GPM steel pinion 16T SBJ016TOGPM steel pinion 18T SBJ018TO

€89.90*

y0514 GPM Shock-Cover for FG, Carson, Smartech, Conrad, set.

These protective covers prevent the shock piston rods and seals for wear caused by dirt. They fit most 1/6 and 1/5 scale shocks.Not suitable for Gas Devil, Thunderbolt, Helldevil, CRT 4x4!- total length 150 mm for all FG / Carson / Smartech / Conrad and all dampers with a diameter from 22 to 30 mm. Set of 4

€14.90*

y0415 Receiver battery charging cable

akku_0018 Version: y0415/04 BEC-connectr+ 2.4EUR

Genuine HT spare/option part.Charging cable for receiver batteries.Content:1 piece

€11.60*

y0115 Accellerator - 1pce.

For all tire adhesives above,15 ml pump spray bottleAccelerator-spray is the second component to cure superglue immediately.Advantages: Tangible adhesion after a few seconds Aromatic solvents and hexane free Suitable for hobby, craft, industry and household.Processing:Clean the surface thoroughly. Apply accelerator at room temperature on both surfaces to be bonded until a clear liquid film appears. Air out the applied accelerator, then apply the superglue as usual.

Content: 15 Milliliter (€593.33* / 1000 Milliliter)

€8.90*

y0516 GPM Shock-Cover for Losi 5ive-T/2.0, Mini and Desert Buggy XL+MTXL

These protective covers prevent the shock piston rods and seals fror wear caused by dirt. They fit Losi 5ive-T, Mini and Desert Buggy XL.Does not fit FG, Carson (thin shocks) , Smartech, Conrad!Please note that the shocks shown in the picture are for presentation purpose only and not included.Content:4 pieces

€14.90*

y0615 HT Yellow safety vests for driver and helper

Genuine HT spare/option part. High visibility bright yellow safety vests for drivers and assistants, highly recommended for racing and training tracks. It should be kept in mind that large scale 1/5 or 1/6 cars weigh more than 10 kg and can be very fast! On most tracks safety vests are required specifically for volunteers. Note: The carriage of a safety vest in the real car is compulsory in almost every country of the EU! These vests were specifically manufactured for the rc-car sport and carry the print "Race Track Marshal" on the back; they also meet the safety standards for the automotive sector.Prices:9,90 EUR eachSponsored volume price for clubs: 29,90 EUR / pack of tenContents:1 piece

From €9.90*

Details

y0715 rc-car-online High tech mechanics gloves, nitrile, black

Genuine HT spare/option part. With non-slip surface perfect for delicate work, actually improving dexterity and grip.Available sizes: 8, 9 and 10.Glove size?Size 8 = 21 cm (S - L) circumferenceSize 9 = 24 cm (L - XL) circumferenceSize 10 = 27 cm (XL - XXL) circumferenceMeasure the circumference of your hand without the thumb and at the widest point (above the ankle). The tape measure should embrace the hand loosely.Norm EN388, Lining 100% polyamide.Partially coated with hightech nitrile Fits like a second skinGrips even when wetGood touch sensitivityLiquid-repellentGood resistance against oil and greaseContents:1 pair / 2 pieces3 pairs / 6 pieces

€8.90*

y0915 Original Zenoah G270 rebuild kit, set

Rebuild kit for the Zenoah G270 engine to replace piston/cylinder related parts. The kit includes the following parts:Cylinder G270Piston G270Piston ring G270Piston pin G270Piston pin retainer clipsCylinder gasketPlease note:It is recommended to use a gasket sealer with every gasket on an engine. This gives better sealing anda longer lasting gasket. We also recommend:y0804 HT-flange sealer 518 y0994 Marston sealery0807 MD-Sil RTV silicone sealer

€84.90*

y0003/01 Pin for Billet brake lever y0003 and y0015

Genuine HT spare/option part. Fits for the brake levers with the numbers y0003 and y0015.Contents:2 pieces

€2.90*

y1515 AP adapter plates for 1001 Mecatech twin-piston in FG 2020

Genuine HT spare/option part. One each r/h and l/h adapter plate for installation of Mecatech twin-piston brake calipers on FG 2020 car uprights/spindles.Fits front and rear!Contents:1 x r/h adapter plate1 x l/h adapter plate4 x csh screw M3 x 10 mm

€19.90*

y0565 RC-Tech Flexa Fix body shell glue

Genuine HT spare/option part. For all epoxy models, plastic and polycarbonate/lexan body repairs!Direction of use:Use a brush or other applicator. Apply enough Flexa Fix to the damaged area. Be careful not to apply too much in one go as it can be difficult to manipulate. If necessary apply two or three coats to build up the joint area. Use epoxy blanket of pieces of polycarbonate (Lexan) to re-enforce if necessary.You can also use the Flexa Fix to re-enforce the body corners (let the pure product leak into the corners) or to make flexible battery packs.Contents:1 piece / 100 ml

Content: 100 Milliliter (€109.00* / 1000 Milliliter)

€10.90*

This product is currently not available.

y0551 HT Car Bag for 1/6 scale cars (Fits FG, Smartech/Carson a.s.o.)

Hobbythek car bag for 1/6 cars. Fits for all 1/6 models for example: FG Offroad-; Monster/Stadium-; Racetruck-; Carson-; Smartech-; Reely Carbon Fighter; Losi Super Rock Rey, Super Baja Rey, Axial Jeep and any more models. Made from extremely durable fabric, easily washable; with wrap-around shoulder belts and zipper closure. No dirt in the car boot! Dimensions: Length: 70 cmWidth: 50 cmHeight: 40 cm

€44.90*

y0575 Helper spring 40 mm length / 27 mm inner diameter - 2 pcs.

y0575 Wire thickness: y0575/01 - 2,3 mm

Item N° y0575 Helper spring 40 mm length / 27 mm inner diameter - 2 pcs.Suitable for cars with a shock diameter of 26 mm like FG Leopard 2, 2WD + 4WD, Sportsline and Competition.The helper spring is used for fine adjustment of the combined spring rate. It works best in combination with a short main spring for short or for longer shocks.Different wire thickness to choice: 2,3 mm, 2,5 mm and 2,7 mm.Measures:- Length: 40 mm- Inner diameter: 27 mm- Wire thickness: 2,3 mm, 2,5 mm, 2,7 mm.

€8.90*

y0315 Elcon Aluminum a-arms, rear lower, for FG Evo and Sportsline, truck width, pair

Rear lower a-arms for all FG Evo cars (except 2020 series) that will bring the car to Race Truck width. The arms can also be installed as an upgrade in Sportsline trucks up to and including the 13 series. The arms are compatible with all other FG parts like uprights, Evo shock mounts and Evo stabilizer bar.Due to the increased width you will also need longer driveshafts turnbuckles for the upper a-arms and shock shafts for installation in an existing Evo. When upgrading a Sportsline truck to the Evo parts you will need a complete Evo stabilizer bar and shock mounts, rose joints and conical spacers instead. Regular price: 129.90 EURSpecial offer: 89.90 EURContents:2 pieces

€89.90*

305159, Shock springs Gas Devil, 4 pce.

Front springs:Length 110 mmInner diameter 32 mmWire diameter 2.5 mmRear springs:Length 142 mmInner diameter 32 mmWire diameter 2.6 mm

€24.90*

305157 Screw set 2 - 1:6

Part is delivered in silver or black color from vendor!

€16.10*

305158, Shocks repair kit Gas Devil

€39.90*

305150/01 Roll cage parts part B Super Attack / Gas Blaster / Spider

Genuine Smartech spare/option part.Fits Super Attack / Gas Blaster / Spider.Content:2 pieces

€18.90*

305154 Nuts, washers, E-clips - Set

10x M3 lock nut 114475x M5 lock nut 119225x M5 lock nut 1192312x 5mm E-Ring 324255x 12x6.5x1.5 washer 324485x 17 x 6 x1 washer 324495x Nylock nut M6 3256810x 7mm E-Ring 3257010x Washer 4,4x11x1mm 325764x fixed piece for engine 32474Part is delivered in silver or black color from vendor!

€34.90*

305150 Roll cage parts Super Attack / Gas Blaster / Spider

Genuine Smartech spare/option part.Content:Front shock mountRoll cage frontRoll cage main partBrace for roll cageStabilization plateScrew plateDimensions:

€44.90*