These cask shaped springs are especially designed to fit the diameters of Mecatech Klick-Shocks and Mecatech Big Bore shocks.Dimensions:Inner diameter, upper: 20,5 mmInner diameter, lower: 16,5 mmOutside diameter: 29,5 mmLength: 52,5 mmWire diameter: 2,4 mm
These cask shaped springs are especially designed to fit the diameters of Mecatech Klick-Shocks and Mecatech Big Bore shocks.Springs:y0452 white 2,4mmy0453 green 2,5mmy0454 orange 2,9mmy0455 black 3,0mm
These cask shaped springs are especially designed to fit the diameters of Mecatech Klick-Shocks and Mecatech Big Bore shocks.Springs:y0453 green 2,5mmy0455 black 3,0 mmDimensions: Inner diameter, upper: 20,5 mm Inner diameter, lower: 16,5 mm Outside diameter: 29,5 mm Length: 52,5 mm
These cask shaped springs are especially designed to fit the diameters of Mecatech Klick-Shocks and Mecatech Big Bore shocks.Dimensions:Inner diameter, upper: 20,5 mmInner diameter, lower: 16,5 mmOutside diameter: 29,5 mmLength: 52,5 mmWire diameter: 3,0 mm
Genuine HT spare/option part. Extra wide tire mounted and glued on genuine 1/6 scale FG Stadium Truck rims 6232/01.Diameter 165 mm, width 90 mm. Fits all FG and Carson largescale cars, may fit other cars with 18 mm wheel squares as well.Available in three different compounds:SoftMediumHardWe have tried various rubber / tire compounds for several months on various forms of terrain, etc.. The Mammoth brings, due to its quite strong and large pins and the extreme width of the tire, especially on hard and low grip surfaces a high traction! The Mammoth is available in soft, medium and hard! The rule is: the harder the ground the softer the tire compound. Where other tires spin helplessly the Mammoth provides serious traction. The disadvantage of Mammoth tires: Because of their extreme width they need to be mounted on FG wheels, which is a labor intensive job. From experience, we must strongly recommend against using rims from another manufacturer in combination with extension rings. Due to the before mentioned traction no other rim has been up to the task! Broken rims and torn squares were the result. Due to the high torque load on the bonding of tires on largescale cars, checking the bonding from time to time and re-glueing (y0067) if necessary is unavoidable.However, the original FG-rim lasts without problems!Unit prices:Mammoth tires extra wide: 47,20 EUR / pairMammoth inserts extra wide: 9,70 EUR/ pairGenuine FG wide track rims 6232/01: 29,90 EUR / pairMounting + glueing rims / inserts / tires: 13,00 EURTotal: 99,80 EUR Contents:2 piecesAlso suitable for:With the following wheel adapter: y1183 Rim adapter
Item N° y0450/01 mf-RaceLine Carbon Airbox replacement o-rings, 2 pcs.One each small and large replacement o-ring for # y0450 mf-RaceLine Carbon Airbox.
These cask shaped springs are especially designed to fit the diameters of Mecatech Klick-Shocks and Mecatech Big Bore shocks.Dimensions:Inner diameter, upper: 20,5 mmInner diameter, lower: 16,5 mmOutside diameter: 29,5 mmLength: 52,5 mmWire diameter: 2,9 mm
These cask shaped springs are especially designed to fit the diameters of Mecatech Klick-Shocks and Mecatech Big Bore shocks.Dimensions:Inner diameter, upper: 20,5 mmInner diameter, lower: 16,5 mmOutside diameter: 29,5 mmLength: 52,5 mmWire diameter: 2,5 mm
Upgrade in case you already own the airbox.Includes venturi adaptor, K&N filter, K&N filter oil (200ml spray can) and K&N filter cleaner (355ml bottle).When using a K&N Filters should observe the foam precleaner y19017 be used with wet-foam air filter oil. To complete coverage of the K&N filter Combat is respected, because the K&N filter without prefilter-oiled foam is to permeable to the off-road use.Please note:The flange on the bottom of the K&N filter has to be cut off for installation on the venturi adaptor!
Genuine HT spare/option part. Set of two aluminum body mount extensions with two holes for body support and fixation clips.The 8.5 x 1.0 mm female thread perfectly fits the usual stock 8 mm body mounts non-cutting. The thread depth of about 22 mm allows for about 10 - 15 mm of body position adjustment!Content:2 pieces
Genuine HT spare/option part.Rim reinforcement, transfers the load over a larger diameter into the rim and protects the rim's square. Will also allow for the use of rims with an already damaged square.For FG Monster- and Stadium rims 6232, 6232/01, 6232/03, 6232/04, 6232/05 and 6232/06.14 mm wide square drives must be used.Please note:When installed with new (unused) rims, it may be necessary to modify the rim's square slightly.Contents:2 pieces
Genuine HT spare/option part. The Y-harness is required for running two servos on a single receiver channel. Top quality heavy gauge 0.5 mm² cable with silicone insulation, 150 mm long, suitable for all rc-systems.Content:1 piece
Genuine HT spare/option part. Conversion kit for FG Monster-Modelle to Mega Beetle.Das 8, 5 mm Innengewinde der Alu-Verlängerung aus dem Set passt optimal auf die üblichen serienmäßigen Kunststoff-Karosserieträger mit dem Außenmaß von ca. 8 mm. Aufgrund der 22 mm Tiefe des Innengewindes, ist es möglich, die Position der Karosse um ca. 10 bis 15 mm zu variieren!The body mounts are to be installed as shown in the pictures. Content of this set:2 pieces of rear roll cage mount (item no. 305001)2 pieces of aluminum body mount extension (item no. y1452)4 pieces of body clip (item no. 6013)
Protects against vibration and dirt which could jeopardize the spring. The spring is not protected by the rubber tube only, but also relieved.product contents: 2 pcs.
Genuine HT spare/option part.Fits all 1/5 and 1/6 scale cars.Made from durable fabric, easily washable, with circumferential elastic band.Contents:1 piece
Single spare parts to replacement number: y0460Ceramic ball bearings suitable for the aluminum and plastic shaft bearings of the clamping roller in the back tension roller housing for all 4WD models FGDimensions: 10 x 19 x 7 mm
Genuine HT spare/option part. Smartech/Carson Monster/Pick-Up Truck to Mega-Beetle body mount conversion kitThe 8.5 x 1.0 mm female thread perfectly fits the usual stock 8 mm body mounts non-cutting. The thread depth of about 22 mm allows for about 10 - 15 mm of body position adjustment!Content of this set:4 pieces of side body mount (FG 6185)2 pieces of aluminum body mount extension (y1452)8 pieces of body clip (y6013)The body mounts are to be installed as shown in the pictures.
Fits Losi 5ive-T, 5ive-B und Mini, Carson Gas Devil/ Hell Devil 4x4. Not for Thunderbolt!.Measures:Socket: approx 33 mmInner diameter: 31,4 mmOuter diameter: 37 mmLength short spring: 103 mmCoils short spring: 8 StückLength long spring: 143 mmCoils long spring: 10 StückFront axle:TypeMeasuresColorItem N°Losi2.3 x 103 mmyellowy0351/01Losi2.4 x 103 mmredy0351/02Losi2.6 x 103 mmbrowny0351/03Losi2.75 x 103 mmbluey0351/04Losi2.8 x 103 mmsilvery0351/05Losi2.9 x 103 mmblacky0351/06Rear axle::TypeMeasuresColorItem N°Losi2.3 x 143 mmyellowy0351/07Losi2.4 x 143 mmredy0351/08Losi2.6 x 143 mmbrowny0351/09Losi2.75 x 143 mmbluey0351/10Losi2.8 x 143 mmsilvery0351/11Losi2.9 x 143 mmblacky0351/12
Genuine HT spare/option part. Conversion kit for FG 1/6 scale 2WD Off-Road models and Smartech Uno/Carson Attack to Mega Beetle.The 8.5 x 1.0 mm female thread perfectly fits the usual stock 8 mm body mounts non-cutting. The thread depth of about 22 mm allows for about 10 - 15 mm of body position adjustment!Content of this set:2 pieces of front body mount (item no. 7154)2 pieces of side body mount (item no. 7154/01)2 pieces of rear roll cage mount (item no. 305001)2 pieces of aluminum body mount extension (item no. y1452)4 pieces of body clip (item no. 6013)4 pieces of M4 x 25 mm worm screw for installation of side and front mounts
€59.90*
This website uses cookies to ensure the best experience possible. More information...