18 products found for "y0097"

Catalogue #1

Engine kill switch with protective rubber cover, y0090

Engine kill switch with protective rubber cover, eliminates the hassle with sticking kill switches. Complete with wiring for easy installation, fits Zenoah G230/240/260/270 and CY engines.

€12.00*

y0092 Alloy starter pawl, CNC-machined

Genuine HT spare/option part. New billet version, CNC-machined!Fits Zenoah G230/240/260/270/290/320, Losi, HPI Fuelie and CY engines. Not as easily damaged as the stock plastic unit.Does not fit PT (Carson/Smartech) engines!Contents:1 piece

€19.90*

y0098 Ceramic ball bearings, sealed, set

y0098 Set content: y0098/2 - set of 14+ 61.6EUR

Why ceramic? Besides corrosion and wear resistance ceramic balls are smoother and have a better shape stability; resulting in less drag from the bearing itself.Available sets: Set consists 6 bearings, includes bearings for FG clutch bell, layshaft and differential (alloy case only!).Set includes:2 pcs. 10x22x6 mm2 pcs. 10x19x7 mm2 pcs. 15x28x7 mmSet consists 14 bearings, includes all bearings from a standard FG-car (not Formula 1) with alloy differential.Set includes:8 pcs. 8x22x7 mm2 pcs. 10x22x6 mm2 pcs. 10x19x7 mm2 pcs. 15x28x7 mm

Variants from €92.30*

€153.90*

HT-Alloy pinion for Attack onroad use y0096, 1 pce.

Hard-coated 25T alloy pinion for use in combination with a . This pinion allows for use of the car on tarmac running touring car tires.Module: m=1,5

€27.90*

y0099 Ceramic ball bearings for CY/Zenoah/HPI Fuelie/Losi crankshaft, 2 pcs.

Special version for Zenoah / CY / HPI Fuelie crankshaft (12 x 28 x 8 mm) with larger radius at the shoulder of the inner race.

€41.00*

y0057 Ball & socket tool for Losi and HPI

Genuine HT spare/option part. Ball & socket tool with t-handle, special version for the ball joints.Fits Losi 5ive-T. 5ive-B, Desert Buggy XL, Desert Buggy XL-E, Monster Truck XL and the HPI Baja 5B and Baja 5R Ford Mustang.Contents:1 piece

€17.90*

y0067 HT tire cement and activator

Accelerator-spray is the second component to cure superglue immediately.This set is also particularly suitable for the possible repair of loosened tire/rim gluing!Advantages:Tangible adhesion after a few secondsAromatic solvents and hexane freeSuitable for hobby, craft, industry and householdProcessing:Clean the surface thoroughly. Apply accelerator at room temperature on both surfaces to be bonded until a clear liquid film appears. Air out the applied accelerator, then apply the superglue as usual.Contents:Special tire cement ht 4000Spray can activator

Content: 170 Milliliter (€87.65* / 1000 Milliliter)

€14.90*

y0037/03 1/16 Allen key wrench

1/16 Allen key wrench for throttle lever mounting screw on our ball-raced Walbro carbs.

€4.90*

y0037/06 9/64 Allen key wrench

9/64 Allen key wrench for the imperial size mounting screw of the carburetor heat sink on Walbro carbs.

€4.90*

y0897 Wheelie bar with suspension for 2WD + 4WD models - 1pce.

Wheelie bar with double ball raced wheel, cnc-machined from high strength alloy. The arm has a rubber suspension unit, the height is infinitely adjustable. The suspension allows for a maximum deflection of 30 degrees and is dirt- and mud-proof. The wheel bearings are sealed.The unit fits FG Monster Truck, Monster Beetle and Marder BigFoot, except for Monster Buggy Off-Road WB535 4WD. Installation on other models will be possible, but requires modifications to the chassis, mainly to accept the bolt pattern. The Carson Attack already has the correct pattern.

€89.90*

y0037/05 Allen key bit 1/16

High quality bit made from S2 steel by KS-Tools. Fits the Allen screw on the throttle lever of our ball raced carbs and the screws for the ball joints on GPM trailing arms SB014L.Content:1 pieces

€4.90*

y0497 Alloy engine mount large for all FG 4WD Models

Large alloy engine mount for all FG 4WD cars.Contrary to the FG pack this one includes the complete hardware for installation in Sportsline cars as well!

€69.90*

y0797 SPEED TEC EXPERT Zenoah 30,5 cm³ tuning engine

The SPEED TEC EXPERT genuine Zenoah 30,5 cm³ engine is optimized for performance with sophisticated craftsmanship and guarantees, besides greatly increased performance, excellent workmanship and stamina. SPEED TEC EXPERT version modifications: Cylinder: Adjustment of compression; enlarged ports, fuel management milled, machined and polished exhaust and intake. Piston: weight reduced; skirt shortened; oil rings, piston above and below piston ring tapered and piston dome ground. Crankshaft: The Zenoah 30,5 cm³ SPEED TEC Expert comes with the genuine Zenoah +2 mm stroker crank #577953101. It is adjusted, aligned and balanced. Flywheel: weight reduced and checked for runout. Gaskets: use of premium quality gaskets.To achieve the optimum performance gain of a SPEED TEC EXPERT engine, we recommend the use of a tuned pipe ( to the tuned pipes ).

€699.00*

y0037/02 Steel shims 8 x 5 x 0.3 mm

Genuine HT spare/option part. Custom made steel shims.Part is delivered in silver or black color from vendor!Dimensions:Inner diameter: 5 mmOuter diameter: 8 mmThickness: 0.3 mmContents:5 pieces

€6.90*

y0037/01 Ball bearings, sealed type 2RS (3/16"x5/16"x1/8")

Genuine HT spare/option part. Ball bearings, sealed type 2RS (3/16x5/16x1/8).Content:2 pieces

€12.90*

y0797/01 SPEED TEC EXPERT 30.5 cm³ modified top end set for G240/G270/G290

Race ported top end set for Zenoah G240, G270 and G290 engine.The SPEED TEC EXPERT genuine Zenoah 30,5 cm³ race ported top end set is optimized for performance with sophisticated craftsmanship and when accurately installed - guarantees, besides greatly increased performance, excellent workmanship and stamina. SPEED TEC EXPERT version modifications: Cylinder: Adjustment of compressionEnlarged portsFuel management milledModified exhaust and intake Piston: Weight reducedSkirt shortenedPiston above and below piston ring tapered and piston dome ground The set includes the following items: Performance-optimized cylinder and piston, piston ring, piston pin, piston pin circlips and cylinder gasket.To achieve the optimum performance gain of a SPEED TEC EXPERT top end set, we recommend the use of a tuned pipe ( to the tuned pipes ).Each SPEED TEC Tuning cylinder set comes with a small amount of a spec. assembly lube for the installation of piston and piston ring. This spec. lube provides the required lubrication to the engine for the first start and dissolves without residue!Please note: You also need the modified crankshaft # along with the SPEED TEC EXPERT top end set to convert a Zenoah 240/270/290 engine to 30.5 cc.

€229.90*

y0037/04 Screw for throttle lever, high strength, 4-40 UNC x 1/8, 3 pices

High strength mounting screw for the throttle lever on all Walbro carbs (included with ball-raced carbs). 1/16" Allen key size.Content:3 pieces

€4.90*

Ceramic ball bearings, sealed, 2 pcs.

y0097 Application: y0097/03 Clutch bell (exc. standard Formula 1) 10x22 mm+ 9.2EUR

Hybrid bearings with silicone nitride balls and steel inner and outer race. The bearings have an extremely low rolling resistance and a longer life than standard bearings. Please note that for installation only a shrink fit or a press fit via the outer race is allowed. Tapping them in will destroy the bearing.

Variants from €30.70*

€39.90*