79 products found for "tt_tt1016"

rc-car-online - Home

TT1013 Top Tuning Shock tower front, Losi 5ive-T/2.0/ Mini and TLR 5ive-B

Genuine Top Tuning spare/option part.Light yet strong version due to reinforcement ribs.Contents:1 piece

€44.90*

TT1026 Top Tuning High-performance fan 40 x 40 x 10 mm

Genuine Top Tuningspare/option part. High performance fan as upgrade for various applications in electric models.The size of 40 x 40 x 10 mm can be swapped e.g. for the fans of the FG motor cooling unit or the fans of various speed controllers.The air flow rate is much higher than with the standard units!The operating voltage of the fan with 5 - 8.4 V is perfectly adapted to these requirements. Technical data: Dimensions: 40 x 40 x 10 mm Operating voltage: 5 8.4 V Current: 0.65A Speed: 16,000 rpm @ 8.4 V Air flow: 16.7 cfm Connector: Dupont 2-pin female (compatible with BEC/Futaba/Universal) Cable length: approx. 17 cm Contents:1 piece

€14.90*

TT1106 Top Tuning Motor cooling for FG brushless cars, long version.

Powerful cooling fan with bracket for installation on FG electric gear plate 66516 (touring cars and off-road models) or chassis strut 10701 (Formula 1).The 60 x 60 x 24 mm TT1028 fan provides way more air flow than the two original fans combined. A chrome-plated steel grille on the intake side protects the fan.Two bracket lengths are available. The short version is intended for motors up to approx. 80 mm overall length. This applies e.g. to all standard FG motors. For longer motors we recommend the long bracket for a better position of the fan over the motors cooling fins. Performance data of the fan: Dimensions: 60 x 60 x 24 mm Operating voltage: 5 - 8.4 V Current: 0.5A Speed: 8.500 1/min @ 8.4 V Flow rate: 39.2 CFM Scope of delivery: Fan TT1028 Long fan mounting frame Protective grille for fan Adapter cable to JR connector Installation hardware

€44.90*

TT1019/01 Top Tuning Steel thread rod left/right

Genuine Top Tuning spare/option part.Replacement turnbuckle for TT1019.Fits a-arm from Top Tuning Set TT1019.Thread sizes: one each M7 l/h to M6 r/h and M7 r/h to M6 l/h.Contents:2 pieces

€19.90*

TT1000/04 Spare screws for electronic switch TT1000

Genuine Top Tuning spare/option part. Set with four screws each M2,5x12 and M2,5x16.Contents:8 pieces

€2.90*

TT1024/01 Top Tuning Pedestal for battery plate for TT1024

Genuine Top Tuning spare/option part. Spare part for electric conversion kit TT1024 or for your own designs.Contents:1 piece

€24.90*

TT1028 Top Tuning High-performance fan 60 x 60 x 24 mm

Genuine Top Tuningspare/option part. High performance fan as upgrade for various applications in electric models.The size 60 x 60 x 24 mm can be swapped e.g. for the fan of the ZTW Beast 300A speed controller. For this particular application, M4x40 screws are required instead of the standard M4x30 screws due to the 9 mm taller fan.The air flow is considerably higher than with the standard units!The operating voltage of the fan with 5 - 8.4 V is perfectly adapted to these requirements. Technical data: Dimensions: 60 x 60 x 24 mm Operating voltage: 5 8.4 V Current: 0.5A Speed: 8,500 rpm @ 8.4 V Air flow: 39.2 cfm Connector: BEC female Cable length: approx. 30 cm Contents:1 piece

€19.90*

y1016/026 Piston pin G320RC

Genuine Zenoah spare/option part. Replacement part fits Zenoah G320RC.Dimensions: Outer diameter: 9 mmInner diameter: 6mmLength: 32 mm

€9.80*

y1016/024 Piston G320RC

Genuine Zenoah spare/option part. Replacement part fits Zenoah G320RC.

€24.90*

TT1027 Top Tuning High-performance fan 50 x 50 x 15 mm

Genuine Top Tuningspare/option part. High performance fan as upgrade for various applications in electric models.The size 50 x 50 x 15 mm can be swapped e.g. for the fan of the ARRMA motor cooling unit or the fans of different speed controllers (e.g. ZTW Beast 200A). The ARRMA application requires approx. 5 mm longer screws due to the 5 mm taller fan (M4x25).The air flow rate is much higher than with the standard units!The operating voltage of the fan with 5 - 8.4 V is perfectly adapted to these requirements. Technical data: Dimensions: 50 x 50 x 15 mm Operating voltage: 5 8.4 V Current: 0.65A Speed: 10,000 rpm @ 8.4 V Air flow: 28.3 cfm Connector: BEC female Cable length: approx. 30 cm Contents:1 piece

€17.90*

y1016/008 Insulator G320RC

Genuine Zenoah spare/option part. Replacement part fits Zenoah G320RC.

€19.90*

y1016/028 Needle bearing G320RC

Genuine Zenoah spare/option part. Replacement part fits Zenoah G320RC.

€8.90*

y1016/111 Starter decal G320RC

Genuine Zenoah spare/option part. Replacement part fits Zenoah G320RC.

€3.90*

B51016 Stabilizer bar mounting plate

Dimensionally identical with Losi 5ive part LOSB2562.Contents:4 piece

€9.80*

TT1021/02 Top Tuning Motor clamps

tt_tt1021_02 Version: TT1021/02C - Diameter 60 mm

Genuine Top Tuning spare/option part. Spare part for electric conversion kit TT1021 or for your own designs.Available with the following diameters:Diameter 57 mm i.e. for Tenshock or CastleDiameter 57,8 mm i.e. for Leopard Baureihe 58Diameter 60 mm i.e. for LehnerDiameter 70 mm i.e. for BP70120 ZTW Beast Brushless engine 620 kV, requires the taller TT1021/01B Top Tuning Motor mount for ZTW Beast motorDiameter 55,75 mmContents:1 piece

€29.90*

y1016/021 Cylinder shroud G320RC

Genuine Zenoah spare/option part. Replacement part fits Zenoah G320RC.

€12.90*

y1016/007 Insulator gasket G320RC

Genuine Zenoah spare/option part. Replacement part fits Zenoah G320RC.

€4.90*

y1016/030 Crankshaft Zenoah G320RC

Genuine Zenoah spare/option part. Replacement part fits Zenoah G320RC.

€99.80*

y1016/014 Crankshaft bearing G320RC

Genuine Zenoah spare/option part. Replacement part fits Zenoah G320RC.

€18.30*

TT1021/01 Top Tuning Motor mount

Genuine Top Tuning spare/option part. Spare part for electric conversion kit TT1021 or for your own designs.Bolt pattern: 4 x 30 mm pitch circle for M4 screwsDistance center of motor / base plate: 32 mmContents:1 piece

€24.90*

ST1010 SPEED TEC Tuning insulator 26 mm

SPEED TEC tuning insulator 26 mm, suitable for nearly all 1/5 & 1/6 cars (for very shallow body shells like Porsche GT or similar please use the 23 mm version # ST1011!) The material components of this high quality engineering plastic, with an extremely high melting point of 280° C, guarantee optimal heat dissipation. Unlike the original insulator, this allows for a much better thermal insulation of the carburetor and therefore prevents fuel vapor lock in the carburetor at high ambient temperatures! The leaning of the engine at higher temperatures is counteracted! The 50% increased height and optimized port allows for lower fuel consumption! 60% glass fiber content of the SPEED TEC tuning insulator makes for strong mounting threads, providing a sturdy base for the usual airboxes or large off-road air filters which are common in competition applications. Kit includes: 1 x insulator 26 mm 1 x insulator gasket 1 x carburetor gasket 2 x allen head steel screws M5x30 2 x M5 serrated washers Please note:It is recommended to use a gasket sealer with every gasket on an engine. This gives better sealing anda longer lasting gasket. We also recommend:y0804 HT-flange sealer 518 y0994 Marston sealery0807 MD-Sil RTV silicone sealer

€29.99*

ST1011 SPEED TEC Tuning insulator 23 mm

SPEED TEC tuning insulator 23 mm, especially 1/5 & 1/6 cars with shallow body shells The material components of this high quality engineering plastic, with an extremely high melting point of 280° C, guarantee optimal heat dissipation. Unlike the original insulator, this allows for a much better thermal insulation of the carburetor and therefore prevents fuel vapor lock in the carburetor at high ambient temperatures! The leaning of the engine at higher temperatures is counteracted! The 30% increased height and optimized port allows for lower fuel consumption! 60% glass fiber content of the SPEED TEC tuning insulator makes for strong mounting threads, providing a sturdy base for the usual airboxes or large off-road air filters which are common in competition applications. Kit includes: 1 x insulator 23 mm 1 x insulator gasket 1 x carburetor gasket 2 x allen head steel screws M5x25 2 x M5 serrated washers Please note:It is recommended to use a gasket sealer with every gasket on an engine. This gives better sealing anda longer lasting gasket. We also recommend:y0804 HT-flange sealer 518 y0994 Marston sealery0807 MD-Sil RTV silicone sealer

€29.99*

TT1030/01 TopTuning Tool Tray for CAR-STAND

Tool and screw tray with quick-mount clamp, fits tubes with a diameter from 32 to 35 mm. Thus perfectly suitable for the TopTuning Car Stand TT1030 and for many other holders.Due to a strong design with high quality materials, a very high load capacity is achieved. Many possibilities to store tools and small parts to have them handy at any time when working with the Car Stand. The adjustable clamp allows the mounting of more than one Tool Tray. Contents: with foldable Tool Tray with milled adapter block with mounting clamp

From €49.90*

Details

TT1001/02 Top Tuning Flanged plastic bushing 6 x 7 x 10

Genuine Top Tuning spare/option part.Spare bushings for the inner side of front and rear Top Tuning 5ive-B aluminum a-arms TT1001/TT1002.Contents:4 pieces

€3.90*

79 products found for "tt_tt1016"

Filter products

rc-car-online - Home