34 products found for "s23011"

rc-car-online - Home

s23021 Carburetor gasket PT 23/28

Genuine Smartech spare/option part.Please note: It is recommended to use a gasket sealer with every gasket on an engine. This gives better sealing anda longer lasting gasket. Actual product may be of different color. We have no bearing on this since we are not the manufacturer.Please note:It is recommended to use a gasket sealer with every gasket on an engine. This gives better sealing anda longer lasting gasket. We also recommend:y0804 HT-flange sealer 518 y0994 Marston sealery0807 MD-Sil RTV silicone sealerContent:1 piece

€2.90*

s23017 Muffler set PT 23/28

Genuine Smartech spare/option part.Muffler with mounting bolts.Content:1 piece

€19.90*

s23019, Exhaust gasket PT 23/28

Actual product may be of different color. We have no bearing on this since we are not the manufacturer.Please note:It is recommended to use a gasket sealer with every gasket on an engine. This gives better sealing anda longer lasting gasket. We also recommend:y0804 HT-flange sealer 518 y0994 Marston sealery0807 MD-Sil RTV silicone sealer

€2.95*

s23010, Fan cover PT 23/28

With mounting screws included.

€26.90*

s23015, Engine cover PT 23/28, set

With mounting screw and spacer included.

€14.90*

s23013, Carburetor spacer plate PT 23/28, set

Spacer plate with 2 gaskets.

€4.90*

s23014, Engine kill switch PT 23/28, 1 pce.

Switch with wire loom.

€6.80*

s23020 Isolator gasket PT 23/28

Genuine Smartech spare/option part.Actual product may be of different color. We have no bearing on this since we are not the manufacturer.Please note:It is recommended to use a gasket sealer with every gasket on an engine. This gives better sealing anda longer lasting gasket. We also recommend:y0804 HT-flange sealer 518 y0994 Marston sealery0807 MD-Sil RTV silicone sealerContent:1 piece

€8.90*

ST1011 SPEED TEC Tuning insulator 23 mm

SPEED TEC tuning insulator 23 mm, especially 1/5 & 1/6 cars with shallow body shells The material components of this high quality engineering plastic, with an extremely high melting point of 280° C, guarantee optimal heat dissipation. Unlike the original insulator, this allows for a much better thermal insulation of the carburetor and therefore prevents fuel vapor lock in the carburetor at high ambient temperatures! The leaning of the engine at higher temperatures is counteracted! The 30% increased height and optimized port allows for lower fuel consumption! 60% glass fiber content of the SPEED TEC tuning insulator makes for strong mounting threads, providing a sturdy base for the usual airboxes or large off-road air filters which are common in competition applications. Kit includes: 1 x insulator 23 mm 1 x insulator gasket 1 x carburetor gasket 2 x allen head steel screws M5x25 2 x M5 serrated washers Please note:It is recommended to use a gasket sealer with every gasket on an engine. This gives better sealing anda longer lasting gasket. We also recommend:y0804 HT-flange sealer 518 y0994 Marston sealery0807 MD-Sil RTV silicone sealer

€29.99*

y3011 Team Decals set Mafia car

Genuine HT spare/option part. Mafia style decal set, suitable for all cars.Dimensions:450 x 400 mmContents:1 piece

€29.90*

s23013/01 Gasket for carburetor spacer plate top/bottom PT 23/28

Genuine Smartech spare/option part.Gasket for carburetor spacer plate top and bottom, order number: s23013. Actual product may be of different color. We have no bearing on this since we are not the manufacturer.Please note:It is recommended to use a gasket sealer with every gasket on an engine. This gives better sealing anda longer lasting gasket. We also recommend:y0804 HT-flange sealer 518 y0994 Marston sealery0807 MD-Sil RTV silicone sealerContent:1 piece

€1.80*

52023011 Lightscale adapter 10° angled, plastic, for Lightscale touring car airbox

The 10 ° downward angled adapter for the Lightscale touring car air box is made from high quality plastic (weight-reduced) and uses an O-ring for sealing; which prevents the airbox slipping as well. The adapter features a slight reverse taper on the outside, making it virtually impossible for the airbox to come loose.The plastic adapter comes with O-ring, screws for installation, gasket and hose clamp included.

€49.90*

2011 Mecatech Big Bore Shocks

Genuine Mecatech spare/option part. The new Mecatech Big Bore shock absorbers with piggy back volume compensation reservoirs use normal silicone oil. The increased diameter in combination with the separate volume compensation via a floating piston of the new MecaTech Big Bore shocks allows for a very constant driving. This results in improved traction and optimized handling.The Big Bore shocks fit most 1/5 scale onroad cars.The outstanding craftsmanship guarantees a perfect seal; the shocks come w/o springs. The Big Bore shocks feature aluminum shock ends with replaceable bushings. Technical specifications: Total length: 120 mmDistance of mounting holes: 110 mm center/centerMounting hole diameter: 4.10 mmThickness of shock ends: 6 mmMax shock/spring travel: 30 mmWeight without oil: 46 g eachWeight without oil with spring: 68 g eachRecommended silicone oil:Mecatech recommends silicone oil with a viscosity of 6,000 to 8,000 for the front axle and 3,000 to 5,000 for the rear.Content:1 set

€175.00*

s23003, Cylinder set for PT 23

With mounting screws and gasket.Please note: It is recommended to use a gasket sealer with every gasket on an engine. This gives better sealing anda longer lasting gasket

€59.90*

s23004, Crankcase set PT 23/28

Complete crankcase with ball bearings, crankshaft seals, gasket and bolts.

€49.90*

s23005, Piston set PT23

Set includes:- piston- piston pin- circlips - spacers for needle bearing

€19.90*

s23023, Piston ring PT 23, 1 pce.

€17.90*

9468 FG Airbox 2011 without choke, set

Item N° 9468 Airbox 2011 without choke, setLight and very solid air box, high air permeability for more engine power. Without choke.Suitable for all Zenoah engines in 1:5 touring cars and 1:6 race trucks. DMC legal ( No. DMC 5 - 093 ).The set includes: Air filter adapter, air box, foam filter, gaskets and installation hardware.

€86.90*

s23007, Clutch set PT 23/28

Clutch shoes with spring, mounting bolts and washers.

€27.70*

s23006, Crankshaft PT23/28, set

With crank key included.

€59.90*

50353011 Support Blocks for the Lightscale Droop Gauge front 30 mm, 1 pce.

Item N° 50353011Support Blocks for the Lightscale Droop Gauge front, 1 pce.This is an Alloy Support Block anodized in black colour with 30mm height.The Support Block is manufactured as a rectangle and so can used a 30mm, depending on which side you choose.The front block uses a single point of support while the rear one comes with two of those. Due to this 3 point support it is assured that even a little tweak in your chassis (none of them is 100% straight) will not affect the result of your measurement. Remove the wheels and tyres from your car and put the car onto the support blocks. Ideally the rear block is positioned to the back of car and the front one just where the servo saver is fixed to the chassis. The car is now propped on the support blocks safely and cannot bounce. Please make sure that no dirt or rubber is trapped between the Support blocks and the chassis.Now you can easily and correctly measure the droop of each axle and adjust the cars` tweak.To do so please use the Lightscale Droop Gauge (50835400)The use of Lightscales` Droop Gauge Support Blocks prevents incorrect measurements and therefore is absolutely reliable. Measurements which are done using a flat surface where the chassis is resting on, like you would use in the pits are usually incorrect due to a slightly tweaked chassis because dirt underneath the chassis will falsify the measurement and lead to a irregular setup. The use of Support Blocks which are based on 4 support points will result in the same incorrect results and downgrade the performance of your car which is why we 100% recommend the use of our support block because as racers ourselves we know all about the problems you may face.

€24.90*

52023010 Lightscale adapter 10° angled, aluminum, for Lightscale touring car airbox

Genuine Lightscale spare/option part. The 10 ° downward angled adapter for the Lightscale touring car air box is made from high quality aluminum and uses an O-ring for sealing; which prevents the airbox slipping as well. The adapter features a slight reverse taper on the outside, making it virtually impossible for the airbox to come loose.The aluminum adapter comes with O-ring, screws for installation, gasket and hose clamp included.Contents:1 set

€65.90*

s23009, Flywheel PT 23/28, 1 pce.

Complete with mounting nut.

€35.95*

s23008, Clutch mount PT 23/28, set

With mounting screw included.

€9.90*

34 products found for "s23011"

Filter products

rc-car-online - Home