This air filter oil is designed for lubricating foam filters for on-road and off-road use. It reinforces the filters' efficiency for better carburation and retains dirt, mud and sand particles. Prevents water from penetrating into the filter.It is recommended to put the filter with a little bit oil in a small polybag and work it vigorously by hand. Excessive oil must be pressed out (don't wring the foam!) afterwards.For cleaning the filter please use the special foam cleaner y0523.The filter element must be dry before re-oiling.Content:50 ml
Freaking expensive, but it is damned fine.ASONIC HQ 72-102 is a synthetic high-temperature lubricating grease, for use in limited slip differentials. Due to the careful selection of product components and the clean manufacturing environment, ASONIC HQ 72-102 is a rolling bearing grease with a particularly low noise level.Benefits for your application:High-temperature lubricating grease for rolling bearingsHigh purityLow noiseGood water resistanceContent:1 piece, tube with 30g
Genuine K&N spare/option part. The K+N air filter oil is only suitable for all K+N air filters, foam preliminary filters and filter inserts.Content:1 piece / 204 ml
Genuine Faskolor spare/option part. Parma Faskolor is a non-toxic water based lexan color, specially formulated for airbrush application. Nevertheless it is also possible to paint small parts with a normal brush.The color is very resistant to cracking, chipping and peeling.Contents:1 piece / 60 ml
Genuine Carson spare/option part. The Reflex Wheel Pro III is the innovative 2-channel entry-level RC system from Carson-Model Sport. The steering angle and the servo travel on the throttle are adjustable (Dual Rate). This allows each model to be controlled very precisely and tuned to the road. In addition, the throttle can be limited for beginners and children. The chrome steering wheel with cellular rubber surface allows precise control and can be tilted individually forwards and backwards. The automatic stop function (low-voltage protection) integrated in the receiver is the life guard for your combustion engine model. This remote control system is ideal for all areas of RC-Car sport.Absolutely ingenious yet simple is the binding procedure:1. Switch the receiver on2. Press the setup key3. Switch on the transmitter - READY!Technical details: Operating voltage transmitter 4.8 to 6 V Operation possible with Li-Ion battery or 4x AA NiMh cells 2.4 GHz FHSS system (frequency hopping spread spectrum) Two infinitely variable, fully proportional channels Servo reverse for both channels (reverse direction) Trim function for throttle and steering Dual Rate for both channels (servo travel limit) Power supply of the BEC receiver from a battery with 4.8 - 7.2V possible Integrated fail-safe (programmable) Uni connector system for Futaba and Graupner-JR Charging socket (positive center pole) Battery status indication by means of LEDContents:1 x 2-channel transmitter 2.4 GHzBEC Mini receiver
Awarded the spiel gut® seal of approval for particularly good and long-lasting toys.With the Neo Fighter, TAMIYA presents the successor to the absolute bestseller among the 2WD RC buggies, the legendary Super Fighter G. This new entry-level racer offers optimal conditions for driving fun on any terrain. The model is particularly impressive in terms of quality and robustness, as it is also the standard model for the TAMIYA FIGHTER-CUP, the world's largest RC youth racing series.The 1:10 scale Neo Fighter, which weighs just over 1 kg, has become slightly longer at a good 40 cm and, thanks to the now larger wheelbase, offers even more directional stability when driving quickly. Its narrow, almost tubular DT-03 chassis contains well-protected electronics and mechanics. Independent suspension, differential, oil-filled shock absorbers and the flexible polycarbon body, which incorporates design elements from classic models, are standard. The highlight is the sensitively controllable electronic speed controller.Required accessories:PS paint, batteries and charger, RC system with servo2WD kit model, DT-03 chassis, electronic speed controller, 540 torque-tuned motor, polycarbonate body, oil pressure damper, rear pin-spike tires, front grooved tires, independent wheel suspension front/rear, rear axle with differential, instructions. Technical details: Impact-resistant tub frame chassis DT-03 Front impact protection Double wishbones Independent front and rear suspension Oil pressure shock absorbers 2WD rear wheel drive Differential gear Polycarbonate body Electric motor type 540 Torque Tuned electronic speed controller Pin spike tires at the rear Grooved tires at the frontTechnical data: Scale 1:10 Length 400 mm Width 248 mm Height 132 mm Wheelbase 287 mm Track v/h: 221/208 mm Wheel dimension WxØ: v 27x80 h 41x86 mm Warnings:Before you begin assembly, you should read and understand all instructions. If a child is assembling the model, a supervising adult should also read the assembly instructions.Tools including knives are used when assembling the kit. Special caution is required to avoid injury.If difficulties arise during assembly, ask an adult to supervise the work or a model maker with RC experience or a specialist dealer.Only use tools for their intended purpose. There is a risk of injury if used incorrectly.If you use paints and/or glue (not included in the kit), note and follow the instructions provided there.Keep the kit away from small children. Prevent children from putting any components in their mouths or putting plastic bags over their heads.
The Mercedes-AMG GT-3 is another model in the large GT-3 series on a TT-02 chassis. The original was used on the race tracks in the GT-3 class in 2016. It has a 6.3 litre V8 engine. This vehicle took 4th place in the 24-hour race at the Nürburgring. 4WD kit model, TT-02 chassis, electr. Speed controller, 540 torque
tuned motor, polycarbonate bodyshell
with add-on parts, cardan drive,
struts, independent suspension,
slick tyres, tub frame chassis,
instructions
Warnings:
Read and understand all instructions before starting assembly. If a child is assembling the model, a supervising adult should also have read the instructions. Tools including knives are used when assembling the kit. Special care should be taken to avoid injury. If difficulties arise during assembly, ask an adult to supervise the work or a modeller with RC experience or a specialist dealer.
Only use tools for their intended purpose. There is a risk of injury if used incorrectly. If you use paint and/or glue (not included in the kit), observe and follow the instructions supplied with the kit.
Keep the kit away from small children. Prevent children from putting any components in their mouths or pulling plastic bags over their heads. Caution! Not suitable for children under 14 years of age. Product details
Technical details: - 1:10 scale kit model - encapsulated 4WD all-wheel drive - prototypical, transparent Mercedes-Benz AMGGT-3 polycarbonate body - Powerful 540 electric motor- Independent front and rear suspension- New colour for the body: PS-63 Bright Gun metal(300086063). To achieve a matt finish, applyPS-55 must be sprayed onto the outside of the body. - Electronic speed control- Many optional tuning parts available
Product information The Raybrig NSX Concept-GT is also released on the reliable shaft-driven 4WD of the TT-02 Chassis. The racing car was developed to race in the 2014 Japanese Super GT Series, and features a 1.6-liter turbocharged direct injection engine with anti-lag, plus a midship layout that optimizes distribution of car's weight, particularly taking into account its unique hybrid system.
About the Model
• This is a 1/10 scale R/C model assembly kit. Wheelbase: 257mm.
• The durable polycarbonate body accurately captures the low nose and complex make up of the front and rear ends.• The TT-02 is a highly versatile and easy-to-maintain chassis.
• Separate parts are included to recreate dynamic rear wing and unique door mirrors.
• Comes with black 10-spoke wheels.
• Includes body markings and masking stickers for use when painting the model.
• A wide range of option parts is available to tune and customize TT-02 Chassis cars.
• Please note that R/C equipment and battery pack are separately required.
Technical details:- 1/10 scale kit model
- Wheelbase 257mm
- Detailed polycarbonate body (includes window masking film
for painting)
- Robust TT-02 chassis
- 4WD shaft drive with protected drive train
- Incl. electronic speed controller
- Powerful 540 Torque Tuned motor
Attention: Not suitable for children under 14 years.
€129.90*
€160.00*(18.81% saved)
This website uses cookies to ensure the best experience possible. More information...